15.1. UMTS Key

This driver allows to exchange data and sms using an UMTS key.

The activation of UMTSKEY device on Abilis is needed to use UMTS-Key. Type the following command on the CP. This will create a CTIP port which overlaps with those created with the CELLBOX.

[21:37:08] ABILIS_CPX:a dev:umtskey-1

COMMAND EXECUTED

[17:30:14] ABILIS_CPX:d ctip:201

CTIP:201 DESCR:
Act     card:UG-1<1>
Run     OPSTATE:UP        LOG:NO                               TYPE:NET-PUBLIC
        signalling:CELL
        mode:CELL         VOICE-ROAMING:DISABLED     NUM:*
        PDN-MODE:AUTO     PDN-ROAMING:DISABLED
        PDN-APN:
        RSIM:NO

The configuration is the same of the CELLBOX.

[Tip]Tip

Interesting chapter: Section 65.17, “How to configure DATA CALL BACK using an UMTS Key, calling an ISDN number”.