It is mandatory that the number in the Abilis user matches the SIM card number, i.e. (i393331212121).

The type of the user is abilisphone, it is needed to allow special abilisphone features, to add abilisphone in abilis a licence is needed (from 1 to 1023 abilisphones per abilis).

[15:55:59] ABILIS_CPX:a user:test pwd:mypassword sip:yes sip-type:abilisphone
[15:56:34] ABILIS_CPX:s user:test sip-number:i393331212121 sip-remote-nat:strict

COMMAND EXECUTED

[15:56:34] ABILIS_CPX:d user:test

--------------------+----------------------------------------------------------
Parameter:          | Value:
--------------------+----------------------------------------------------------
USER:                 test
ALIAS:                test
ID:                   13            <Read Only>
PWD:                  ***
...
SIP:                  YES
SIP-TYPE:             ABILISPHONE
SIP-DOMAIN:           SYS
SIP-HOST:             DYNAMIC
...
SIP-NUMBER:           i393331212121
...
SIP-REMOTE-NAT:       STRICT
...
-------------------------------------------------------------------------------

[12:47:42] IMBOURNE:d ctisip numbers

Total:1         Connected:1          Static:0

NUMx:                   USER:                             P:
------------------------------------------------------------
i393331212121           test                              C

[12:51:34] IMBOURNE:a ctisip numbers numx:777 user:test

COMMAND EXECUTED

[12:51:53] IMBOURNE:

	Note
	if you wants to assign another easier internal number then use the command a ctisip numbers numx:777 user:test.

The numbers related to Abilisphone users are automatically added to list named NumAbilisphone that is very useful to simplify the CTIR routings.

[18:50:11] ABILIS_CPX:d list:NumAbilisphone

LIST:NumAbilisphone       - IN
     Automatically_generated_Abilisphone_Numbers_list_(ReadOnly)
     i393331212121

[18:50:16] ABILIS_CPX:

If the Abilis owns a FQDN you may specify it in this way:

[16:00:25] ABILIS_CPX:s p res:ctisip domain:foo.bar

COMMAND EXECUTED

[16:04:17] ABILIS_CPX:d p res:ctisip

RES:CtiSip -------------------------------------------------------------------
Run    DESCR:Session_Initiation_Protocol
       LOG:NO                  ACT:YES                 mxps:2172
       sesnum:10               non-invite-sesnum:50    tcp-sesnum:10
...
       DOMAIN:foo.bar
...

[16:04:21] IMBOURNE:

	Note
	To activate modifications to CTISIP port parameters then use command init res:ctisip

To allow SIP calls in Abilis simply prepare StoV and VtoS calls allowing at least 8000 bps as speed (if Spirit 8K is allowed or 64000 if only PCMA, G711.A is used.