Calls directed to POTS Card are routed in transparent mode.
Assume that:
Abilis has the following CTI ports configuration: ports 101 and 102 are toward the PBX;
Type the following command to verify cti port group configuration:
[18:12:13] ABILIS_CPX:d ctig
ID: PICKUP: SCAN: RULE:
---------------------------+-------------------------+-------------------------
[DESCR:]
ID: SCAN: RULE: PICKUP: |P1 P2 P3 P4 P5 |P6 P7 P8 P9 ...
|... P62 P63 P64
---------------------------+-------------------------+-------------------------
PBX_group
1 NO R ST |101 102 . . . |. . . . .
---------------------------+-------------------------+-------------------------
ISDN_line_group
2 NO R ST |33 34 . . . |. . . . .
---------------------------+-------------------------+-------------------------
The following routings allow to route calls coming from ISDN line ports (G2) toward the POTS port (G1).
[18:22:32] ABILIS_CPX:a ctir pr:3 type:tr poi:g2 poo:g1
COMMAND EXECUTED [18:23:40] ABILIS_CPX:d ctir
- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- ---+-----+-----------------+---------+--------------------+-------------------- PR |[DESCR] |TYPE |POI/SR [SR] |POO/DS |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT|SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |RGI |RGO |FMRLY|FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 ------------------------------------------------------------------------------- ... ------------------------------------------------------------------------------- 3 TR G2 G1 * * -------------------------------------------------------------------------------
The routing PR:3 routes calls coming from G2 ports toward POTS ports group G1.