12.5. How to update UMTSBOX-2 firmware

Go to http://abilis.antek.it/downloads/firmwares/download.html and download the latest firmware.

[Note]Note

Access to download section is restricted, before proceeding you need to obtain a valid username/password from Abilis technical support ().

The UMTSBOX-2 firmware can be upgraded only if the current version is equal or greater than 9. Use the following command to check the current version of firmware. In the example below firmware version is equal to 19.05.

[15:44:20] ABILIS_CPX:_d usbdev

USB Server Overview:

ID  VendorId/Manufacturer     ProductId/Product                Ver UsbPortId
-------------------------------------------------------------------------------
1   0000 On Time              0000 EHCI Virtual Root Hub      0.00 0
2   0000 On Time              0000 UHCI Virtual Root Hub      0.00 1
3   0000 On Time              0000 UHCI Virtual Root Hub      0.00 2
4   0000 On Time              0000 UHCI Virtual Root Hub      0.00 3
5   0000 On Time              0000 UHCI Virtual Root Hub      0.00 4
6   04CC                      1520                            2.00 0.2
7   04CC                      1520                            2.00 0.3
8   04D8 Abilis               000C USB CITO-BOX  - GPIO      19.01 0.2.0
9   08BB Burr-Brown from TI   2904 USB Audio CODEC            1.00 0.2.1
10  08BB Burr-Brown from TI   2904 USB Audio CODEC            1.00 0.3.2
11  04D8 Abilis               000C USB UMTS-BOX2             19.05 0.3.3
12  05C6 SimTech , Incorporat 6000 SimTech  HSDPA Modem       0.00 0.3.0
13  05C6 SimTech , Incorporat 6000 SimTech  HSDPA Modem       0.00 0.3.1

[15:44:26] ABILIS_CPX:_

If the above condition is met, you can add the BLUSB device typing the following command and then restart abilis (use the command warm start).

[15:51:01] ABILIS_CPX:a dev:blusb-1

COMMAND EXECUTED

[15:51:11] ABILIS_CPX:warm start

Updating steps:

The updating procedure can last for minutes and the result can be displayed typing D L. If the update is successful, next log will be displayed, otherwise an error log is generated.

12/05/2015 21:26:59 [00340] W: FW UPLOAD REQUEST 04D8 000C 0.3.3
12/05/2015 21:26:59 [00341] W: FW UPLOAD REQUEST SUCCESS 04D8 000C 0.3.3
12/05/2015 21:26:59 [00267] I: CtiP-501 VOICE-ST:DOWN PDN-ST:DOWN
12/05/2015 21:27:17 [00336] W: FW UPLOAD START 04D8 000C 0.3.3
12/05/2015 21:27:19 [00337] W: FW UPLOAD SUCCESS 04D8 000C 0.3.3
12/05/2015 21:28:02 [00267] I: CtiP-501 VOICE-ST:READY PDN-ST:READY
[Caution]Caution

In case of failure of updating procedure, the previous version of firmware can be restored unplugging and plugging in the usb cable of UMTSBOX