69.11. How to configure opc to collect call information from a remote abilis

Assumptions:

Enter into the local Abilis control-program or open the configuration file with the Console configurator and type the following commands.

s p opc maxremotes:5set the max number of remote abilis to monitor
s p opc rem:0 abilisid:testconfigure the abilisid of the remote abilis
s p opc rem:0 server:192.168.1.150configure the ip address of the remote abilis
s p opc rem:0 login:admin password:adminset login and password to access the remote abilis opc
s p opc rem:0 enabled:yesenable the access the remote abilis opc
save confsave the configuration

On a working Abilis, you must initialize the OPC resource: init res:opc.