Configure the SNTP resource to take the synchronization form the NTP host 129.132.2.21.

[11:05:38] ABILIS_CPX:s p sntp cliact:yes host-1:129.132.2.21 pollp:1440

COMMAND EXECUTED

[11:06:17] ABILIS_CPX:d p sntp

RES:Sntp - Not Saved (SAVE CONF), Not Refreshed (INIT) ------------------------
       ------------------------------------------------------------------------
Run    DESCR:Simple_Network_Time_Protocol
       LOG:NO
       - Client ---------------------------------------------------------------
       CLIACT:YES                     udp-remport:123
       HOST-1:129.132.002.021         HOST-2:#
       HOST-3:#                       HOST-4:#
       SRCADD:R-ID (192.168.000.201)
       POLLP:1440      NRTY:3         TBW:30        TBD:30
       - Server ---------------------------------------------------------------
       SERVACT:NO                     udp-locport:123
       IPSRC:*                        IPSRCLIST:#

With this configuration, Abilis will send a synchronization request every 1440 minutes (POLLP parameter) to the host 129.132.2.21.

	Tip
	Interesting chapter: Section 68.22.1, “How to activate the SNTP client”.

Configure the SNTP resource to act as Server. Only the IP addresses of the LAN 192.168.1.0/24 will be enabled to the service (list: sntp_allowed).

[11:42:10] ABILIS_CPX:s p sntp servact:yes ipsrc:192.168.0.100 ipsrclist:sntp_allowed

COMMAND EXECUTED

[11:42:18] ABILIS_CPX:d p sntp

RES:Sntp - Not Saved (SAVE CONF), Not Refreshed (INIT) ------------------------
       ------------------------------------------------------------------------
Run    DESCR:Simple_Network_Time_Protocol
       LOG:NO
       - Client ---------------------------------------------------------------
       CLIACT:YES
       HOST-1:129.132.002.021         HOST-2:#
       HOST-3:#                       HOST-4:#
       SRCADD:R-ID (192.168.001.001)
       POLLP:1440                NRTY:3       TBW:30     TBD:30
       - Server ---------------------------------------------------------------
       SERVACT:YES               udpport:123
       IPSRC:192.168.000.100     IPSRCLIST:SNTP_Allowed

With this configuration, Abilis works as Server and Client simultaneously.

	Tip
	Interesting chapter: Section 68.22.2, “How to activate the SNTP server”.