NPV stands for New Packet Voice and it is the new way Abilis uses for it's proprietary Voice over IP.
NPV has been introduced in addition to the "old" PV, thus permitting perfect coexistence of the two as well as a smooth migration if desired.
The comparison between NPV and PV are summarised in the following table.
Table 39.1. NPV vs PV
NPV | PV | |
---|---|---|
Encapsulation | IP/UDP, ISDN B-CH | IP/UDP, ISDN B-CH, Frame Relay, ATM, Leased line |
Number of links | Default 256, with licence 1000 | 256 |
UDP local port | ONE for all links. Default 38383. | One for every PV |
Backup | Pool of max-bck channels [0..250] | One for every PV |
Authentication | By Abilis-ID or user defined key or both together. Uses RSA encryption to secure the authentication. | No |
Roles | Peer, Client, Server | STD, EXT, EXT-CLIENT, EXT-SERVER |
IP address filtering | Yes | Yes |
NAT traversal | Yes (client/server) | Yes (ext-client/ext-server) |
Double path (ART) | Yes | Yes |
Voice packets redundancy | Yes | Yes |
Link state check | Yes, with peer states alignment and burst options | Yes |
TOS/DS configuration | Yes | Yes |
Cryptography | RC6 with 256 bits dynamic keys | RC6 with 128/192/256 static keys |
CTIL parameters | Included in NPVL configuration | Separated in CTIL table |
Extensive logging | Yes | No |
Configuration | Simplified | Complex |
Configuration resources | One resource with up to 1000 links | One per every link |
Some key notes about the NPV resource:
Role: For the IP section of NPV we can have following possible scenario.
Both Abilis have a static and "not natted" IP address and UDP port.
In this case both Abilis can be configured as
PEER
or CLIENT/SERVER
, the
choice is free.
One Abilis has a static and "not natted" IP address and UDP port, the other has a dynamic IP address or it is behind NAT.
In this case, the Abilis with static and "not natted" IP
address and UDP port must be configured as
SERVER
while the Abilis with dynamic/natted
IP must be configured as CLIENT
.
Both Abilis have dynamic IP addresses.
In this case NPV cannot be used.
One Abilis has static and natted IP address, the other has a dynamic IP address or it is behind NAT.
In this case the Abilis with static and natted IP must be
configured as SERVER
, the other as
CLIENT
.
Table 39.2. Role
Role | Description |
---|---|
PEER | Allowed only when both Abilis have a static and "not natted" IP Address and UDP port. |
CLIENT/SERVER | Allowed in any situation. The role CLIENT is required on the side with dynamic or natted IP. |
Warning | |
---|---|
Backup links are not affected by Role setting. |
ART Protocol: “Abilis Redundant Tunneling” sends the same information on two different lines. The receiving Abilis discards the packet which arrives second (out-of sequence). The probability that the same packet is lost on both links equals the product of the original probabilities. Example: two links with 10% failure rate (a very high one!) ends up with 1%, which is normally negligible.
Tip | |
---|---|
It is advisable to use ART ONLY with lines with the same speed. In case of lines with different speeds, the packets are sent with the maximum speed of the slower line. |
VRED Protocol: Abilis “Voice Redundancy” duplicates VOICE and/or FAX packets by repeating a packet when the subsequent one has to be sent. This method is similar to the redundancy used in SIP for T38 packets. The receiving Abilis discards the packet which arrives second (out-of sequence). The probability that the same packet is lost in two different moments is therefore reduced.
Link Check: it is a procedure used to detect end-to-end link real functioning, regardless of the lower protocol layers states.
Backup over ISDN: in case of failure of the permanent IP connection, the Abilis NPV links can be instantaneously switched onto ISDN backup lines.
Encryption: it activates the cryptography of the voice/fax sent on the NPV link, IP and ISDN backup, using RC6 cipher with a 256 bit cryptography key, randomly generated at every connection.