Use the following commands to display the diagnostics of the CTIIAX resource:
Shows diagnostic information, such as the state of the resource, the currently used channels, the remote IAX username/address/port, the calling and the called number.
Shows diagnostic information in an extended format: the same information listed for d d ctiiax command and the state of Unattended/Attended Call Transfer, the minimum/average/maximum lag value during the call and the jitter value (calculated as variance of the lag) in least 10 seconds.
[22:15:27] ABILIS_CPX:d d ctiiax
RES:CtiIax --------------------------------------------------------------------
Inter-Asterisk_eXchange_Version_2
STATE:ACTIVE UDP-STATE:OPENED USED-CHAN:1
- IAX Channels diagnostics ---------------------------------------------
CH: IAXState User RemAdd-RemPort
Q931State CallId CG CD
------------------------------------------------------------------------
0 CONNECTED asterisk160 192.168.000.253-4569
10-CONNECTED-TO 636 9916 749
------------------------------------------------------------------------
1 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
2 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
3 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
4 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
5 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
6 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
7 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
8 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
9 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
[22:15:30] ABILIS_CPX:d de ctiiax
RES:CtiIax --------------------------------------------------------------------
Inter-Asterisk_eXchange_Version_2
STATE:ACTIVE UDP-STATE:OPENED USED-CHAN:1
- IAX Channels diagnostics ---------------------------------------------
CH: IAXState User RemAdd-RemPort
Q931State CallId CG CD
Q932State UCTState ACTState CPOState
MinLag MaxLag AvgLag LastLag 10sec-JitterLag
------------------------------------------------------------------------
0 CONNECTED asterisk160 192.168.000.253-4569
10-CONNECTED-TO 636 9916 749
IDLE - - -
- - - - -
------------------------------------------------------------------------
1 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
2 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
3 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
4 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
5 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
6 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
7 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
8 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
9 DISCONNECTED
00-DISCONNECTED
------------------------------------------------------------------------
Use the following commands to display the statistics of the CTIIAX resource:
Shows statistic information, such as the number of incoming/outgoing accepted/rejected calls, the number of incoming/outgoing succesful/failed registrations, the number of incoming/outgoing succesful/failed transmission requests.
Shows statistic information in an extended format: the same information listed for d se ctiiax command are shown for each session.
[22:15:27] ABILIS_CPX:d s ctiiax
RES:CtiIax --------------------------------------------------------------------
IAX2
--- Cleared 3 days 12:31:07 ago, on 28/05/2015 at 19:48:09 -------------
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
SUCC-CALL | 0| 2|FAIL-CALL | 0| 0|
SUCC-REG | 6085| 0|FAIL-REG | 0| 0|
SUCC-QUAL | 0| |FAIL-QUAL | 0| |
SUCC-TRAN | 0| |FAIL-TRAN | 0| |
SUCC-TXREQ | 0| 0|FAIL-TXREQ | 0| 0|
EXP-RETRY | 0| 0|DTMF | 0| 0|
QUELCH | 0| |UNQUELCH | 0| |
LOST-JITTER| | 0|OUTSEQ-FULL| 0| |
LOST-NOBUF | 0| 0|OUTSEQ-MINI| 0| |
UNSUPPORTED| 0| 0|TRUNK-OVR | | 0|
DENIED-IP | 0| |BANNED-IP | 0| |
[22:15:30] ABILIS_CPX:d se ctiiax
RES:CtiIax --------------------------------------------------------------------
IAX2
--- Cleared 3 days 12:31:35 ago, on 28/05/2015 at 19:48:09 -------------
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
SUCC-CALL | 0| 2|FAIL-CALL | 0| 0|
SUCC-REG | 6086| 0|FAIL-REG | 0| 0|
SUCC-QUAL | 0| |FAIL-QUAL | 0| |
SUCC-TRAN | 0| |FAIL-TRAN | 0| |
SUCC-TXREQ | 0| 0|FAIL-TXREQ | 0| 0|
EXP-RETRY | 0| 0|DTMF | 0| 0|
QUELCH | 0| |UNQUELCH | 0| |
LOST-JITTER| | 0|OUTSEQ-FULL| 0| |
LOST-NOBUF | 0| 0|OUTSEQ-MINI| 0| |
UNSUPPORTED| 0| 0|TRUNK-OVR | | 0|
DENIED-IP | 0| |BANNED-IP | 0| |
------------------------------------------------------------------------
CH:0 CallId:1815 CG:0376370598 CD:0376391900
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:1 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:2 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:3 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:4 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:5 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:6 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:7 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:8 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
CH:9 CallId:0 CG: CD:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
VOICE-FRM | 0| 0|LOST | 0| |
OUTSEQ-FULL| 0| |LOST-JITTER| | 0|
OUTSEQ-MINI| 0| |LOST-NOBUF | | 0|
------------------------------------------------------------------------
Below debug commands are described. They are useful to view the authentication/registration logs and the registered IAX users table.
Note | |
---|---|
To use these commands you need to have administrator or super user rights. |
Type the following command to display the syntax:
[14:09:58] ABILIS_CPX:debug res:ctiiax lsn:0
RES:CtiIax --------------------------------------------------------------------
Inter-Asterisk_eXchange_Version_2
BufferLength:931 Date/Time:09/06/2015 09:53:09 TraceTime:42200235
Usage:
LSN:0 - This help
LSN:1 - Extra channels diags
LSN:2 - Show transferring diags
LSN:3 - Show debug log
LSN:3 CMD:CLR - Clear debug log
LSN:3 CMD:SET:[DFT | CLR | FULL | [level,...]] - Set log event mask
No parameters - Show current events log mask
DFT - Log default events (ERR events only)
CLR - Clear log event mask
FULL - Log all events
levels:
ERR - Log only error events
REG - Registration events
INFO - Informative events
LSN:4 - Show registered users
LSN:10 CMD:UserName - Force Abilis registration with this user
LSN:11 CMD:UserName - Force User unregisterring.
Type the following command to display the event logs connected with the users registation:
[18:04:09] ABILIS_CPX:debug res:ctiiax lsn:3
RES:CtiIax --------------------------------------------------------------------
IAX2
BufferLength:64512 Date/Time:01/06/2015 08:21:00 TraceTime:304352308
DD/MM/YYYY HH:MM:SS - CALLID DESCRIPTION
01/06/2015 08:21:00 - [17449] Error in IN channel with 192.168.0.167:4569
01/06/2015 08:21:00 - [17449] Retransmission out of time FF 6, 14
01/06/2015 08:21:20 - [17451] Error in OUT channel with 192.168.0.100:4569
01/06/2015 08:21:20 - [17451] Password is not valid, peer:iaxphone
This table shows data, time, identification of the event and the description of the error.
Possible errors could be:
unknown user;
codec not supported;
retransmission out of time (happens when you are cut off).
Most common usage are:
debug res:ctiiax lsn:3 : shows log;
debug res:ctiiax lsn:3 cmd:clr : clear log;
debug res:ctiiax lsn:3 cmd:set:err : set log mask to log only errors events;
debug res:ctiiax lsn:3 cmd:set:err,reg : set log mask to log only errors and registration events;
debug res:ctiiax lsn:3 cmd:set:full : set log mask to log any event.
The following command shows the registration table (remote peers registered with Abilis and remote peers Abilis is registered to). Registration in IAX is a way to avoid NAT troubles and mantain connectivity between IAX peers.
[17:03:12] ABILIS_CPX:debug res:ctiiax lsn:4
RES:CtiIax --------------------------------------------------------------------
IAX2
BufferLength:64512 Date/Time:01/06/2015 08:22:21 TraceTime:304433357
User Host Port REG LIFETIME AGE
-------------------------------------------------------------------------------
asterisk 192.168.000.250 4569 REMOTE 60 12
zoiper 192.168.000.024 4569 LOCAL 60 35
-------------------------------------------------------------------------------
Meaning of the parameters:
User
Username registered in the user table (d user).
Host
IP address of the user.
Port
UDP port of the user.
REG
Registration of the user [REMOTE
: Abilis
is registered to a remote peer; LOCAL
: a remote
peer is registered to Abilis].
LIFETIME
How often (in seconds) the registration is requested.
AGE
Time (in seconds) since last valid registration.
In the previous example, Abilis is registered to the remote peer
asterisk
(ip address: 192.168.0.250) which needs
Abilis registration each 60 seconds; Abilis registered itself 12 seconds
ago.
The user zoiper
(ip address: 192.168.0.24) is
registered to Abilis; it registered itself 35 seconds ago.