8.4. LOG parameter

Through the LOG parameter of each resource, logging functionalities and alarms can be activated.

The following table shows the meaning of the available options:

Table 8.1. LOG parameter table

OptionMeaning
DRecording of the driver state changes and/or the meaningful events in Debug Log.
SRecording of the driver state changes and/or the meaningful events in the System Log.
APeriodic detection of alarms. The detected alarms can be displayed using the command alarm view or by the MDFIDE panel.
LOn alarm detection, acoustic signal plus a message on the LCD display are generated. This function depends on activation of alarm detection by the A option.
TGeneration by the SNMP Agent of traps corresponding to any change of the driver state and/or occurring of meaningful events.

The following values are also allowed:

Table 8.2. LOG parameter table

OptionMeaning
NOAll the logging functionalities, alarms detection and generation, above mentioned, are disabled.
ALLAll the logging functionalities, alarms detection and generation, above mentioned, are enabled.
+EThe value ALL+E activates all the options and extended Log of state changes. The value NO+E is meaningless, so it's ignored.

Options can be combined together. Some examples:

Adding or deleting one or more functionalities without setting from the scratch the value of the parameters can be done using + and - characters.

Some examples:

[Note]Note

The changes made to this parameter are immediately activated, without the need of initialization commands.