38.2. Example of configuration of the POP3 resource

The example below shows how to configure the POP3

[13:26:42] ABILIS_CPX:s p pop3 domain:pop3.mail1.lan

COMMAND EXECUTED

[13:26:50] ABILIS_CPX:d p pop3

RES:Pop3 ----------------------------------------------------------------------
Run    DESCR:Post_Office_Protocol_Ver3
       LOG:NO         ACT:YES              tcp-locport:110  TOS:0-N
       sesnum:10      DT:300               MAX-IP-SES:2
       DOMAIN:pop3.mail1.lan
       wdir:C:\APP\MAIL\
       MSG-LIFETIME:2419200                AUTH:ANY
       IPSRC:127.000.000.001               IPSRCLIST:PrivateIpAdd

Configure for the user parameter MAIL:YES

[12:35:59] ABILIS_CPX:a user:test pwd:test1234 mail:yes  

COMMAND EXECUTED 

[12:36:07] ABILIS_CPX:d user

------------------------+-------------+----------------------------------------
USER             PWD ACT|CTIP CLUS    |CHAT LDAP PPP FTP HTTP MAIL IAX SIP VO
------------------------+-------------+----------------------------------------
admin            *** YES #    #        NO   YES  YES YES YES  NO   NO  NO  YES
test             *** YES #    #        NO   NO   NO  NO  NO   YES  NO  NO  NO

Configure the SMTP parameters:

[13:50:21] ABILIS_CPX:s p smtp LOCAL-DOMAIN:mail1.lan STORE-MB:YES

COMMAND EXECUTED

[13:55:41] ABILIS_CPX:d p smtp

RES:Smtp ----------------------------------------------------------------------
Run    DESCR:Simple_Mail_Transfer_Protocol
       LOG:NO         ACT:YES              tcp-locport:25  
       SRCADD:R-ID (192.168.010.254)       TOS:0-N
       ses-tot:10     SES-RESERVED-IN:2    SES-RESERVED-OUT:2    
       DT:120         MAX-IP-SES:2         MAX-RCPT:100           
       IPSRC:127.000.000.001               IPSRCLIST:PrivateIpAdd
       LOCAL-DOMAIN:mail1.lan
       HELOHOST:noname
       wdir:C:\APP\MAIL\
       max-fail-notif:50                   MB-MAXSIZE:5000
       MSG-MAXSIZE:65535                   MB-MAXMAILS:1000       STORE-MB:YES
       -- Local SMTP relay ----------------------------------------------------
       RELAY-NET:#                         RELAY-IPSRCLIST:#                   
       RELAY-AUTH:DISABLED
       QUEUE-LIFE-TIME:432000              MAIL-TRY-DELAY:300  
       -- External SMTP server for relay --------------------------------------
       SERVER:
       SERVER-TCP-PORT:25
       SERVER-AUTH:NO                      SERVER-SECURITY:NONE
       SERVER-USER:
       SERVER-PWD:
       -- SMS Gateway ---------------------------------------------------------
       SMS-GW:NO                           SMS-PERMIT:RELAY
       SMS-IP:#                            SMS-SENDER:#
[Tip]Tip

For more information how activating the SMTP resource please see: Section 37.1.1, “How to activating the SMTP resource”.

[Caution]Caution

To activate the changes made on the upper case parameters, execute the initialization command init res:smtp; while to set act the changes made on the lowercase parameters a save conf and an Abilis restart are required (i.e. With warm start command).