To activate On-Demand recording for user is required that the CTIVR, SMTP, OPC and HTTP resources to be active. Refer to: Section 63.4.1, “Activating the CTIVR resource”, Section 38.1.1, “Activating the SMTP resource”, Section 59.1.1, “Activating the OPC resource” and Section 45.1.1, “Activating the HTTP resource”.

Go in your user preferences, then click on the Voice recorder tab.

Figure 76.30. Voice recorder options

In 'Recipients' textbox write your e-mail address.

You can send a test mail to the chosen address clicking on the Test button. Is recommended to test the e-mail. If it isn't correct you'll not receive the recorded call.

When you have finished, remember to click on Apply.

	Tip
	Interesting chapter: Section 63.4, “CTIVR - Voice Recorder”.

This button starts the recording. While you are recording the button blinks . To stop the recording, click again on the button.

	Note
	Is mandatory to warn the called person that you are going to record.

	Tip
	Interesting chapter: Section 63.4.4, “On-Demand recording”.

By default, the max recording file size is 15 MB. This is the equivalent of a 32 minutes call. When the 31st minute ends, the recording is stopped. To bypass this limitation, you can stop the recording and immediately restart it. You'll receive a mail for each recording.