| 82.14. How to replace ADSL modem with ADSL2+ modem | ||
|---|---|---|
 | Chapter 82. HowTo - Management |  |
| 82.14. How to replace ADSL modem with ADSL2+ modem | ||
|---|---|---|
| | Chapter 82. HowTo - Management | |
To replace a ADSL modem with ADSL2+ modem is needed to change the
USBPORTID parameter. This change is necessary because
the modem ADSL2+ work with USB2.0.
| s dev:dslusb-1 usbportid:none | Cancel the usbportid (e.g. DSLUSB-1 device). |
| init usbdev | Initialization of USB devices. |
| save conf | Save the configuration. |
![[Note]](../images/note.png) | Note |
|---|---|
The command init usbdev must be typed after replacing of modem. |
![[Warning]](../images/warning.png) | Warning |
|---|---|
If you are connected remotely to ABILIS through this ADSL line, it is better to restart the ABILIS instead of initialize the device, please refer to: Section 82.11, “How to automatically reassign the USBPORTID”. |
| Note |
|---|---|
The Abilis ADSL2+ modem is supported starting from Abilis firmware version 7.5. |
| |  | |
| 82.13. How to replace USB Ethernet with USB GigaEthernet |  | 82.15. How to upgrade ADSL2+ modem firmware |