82.18. How to upgrade POTS card firmware

82.18. How to upgrade POTS card firmware
	Chapter 82. HowTo - Management

The PCIPOTS card firmware can be upgraded only if the current version isn't 25. Use the following command debug res:ctisys cmd:l1pXb lsn:13 (where in place of X you have to write the value of a CTIP belonging to the PCIPOTS) to check the current version of firmware.

[12:03:12] ABILIS_CPX:d dev

------------------ Active PCI Devices and Physical Resources: -----------------
Device(s)   Run Physical Resource(s) or CTI Port(s)          SlotId  Addr  Irq
-------------------------------------------------------------------------------
ASY-1       Yes Async-1  . . . . . . . . . . . . . . . . . .      -   3F8    4
ETH-1       Yes Eth-1  . . . . . . . . . . . . . . . . . . .      6   PCI ( 10)
ETH-2       Yes Eth-2  . . . . . . . . . . . . . . . . . . .      8   PCI ( 12)
BRI8-1      Yes 31..38 . . . . . . . . . . . . . . . . . . .      7   PCI (  9)
POTS-1      Yes 101..116 . . . . . . . . . . . . . . . . . .     10   PCI ( 10)
VPOTS-2     Yes 117..132 . . . . . . . . . . . . . . . . . .      -   PCI (  -)

...

[12:02:42] ABILIS_CPX:debug res:ctisys cmd:l1p101b lsn:13

RES:CtiSys --------------------------------------------------------------------
       CTI_System_general_properties                                           
       BufferLength:64512  Date/Time:23/11/2015 12:03:12 TraceTime:496638388

PCIPOTS Firmware version

FPGA FW version:  20

In this example the firmware version is equal to 20.

The updating steps:

Go to http://support.abilis.net/ and download the latest firmware.
Upload the POTS.BIN into the CPX working directory without changing the file name. The upload can be done using the file put command (with ZMODEM: file put z pots.bin) or the FTP resource.

Issue the command debug res:ctisys cmd:l1pXb lsn:42, where in place of X you have to write the value of a CTIP belonging to the PCIPOTS that you want to update and wait until the firmware upload ends.

Example:

[13:03:12] ABILIS_CPX:debug res:ctisys cmd:l1p101b lsn:42

RES:CtiSys --------------------------------------------------------------------
       CTI_System_general_properties
       BufferLength:387    Date/Time:23/11/2015 13:03:23 TraceTime:2317453

PCIPOTS debug information - Write firmware to card

2015-11-23 13:03:49 Info: Writing data to EEPROM
2015-11-23 13:03:49 Info: Erasing...
2015-11-23 13:03:51 Info: Erase Done
2015-11-23 13:03:51 Info: Programming...
2015-11-23 13:03:58 Info: Programming successful
2015-11-23 13:03:58 Info: Verifying...
2015-11-23 13:04:05 Info: Verify completed
2015-11-23 13:04:05 COMPLETED

Reboot the Abilis (i.e. With warm start command).

After reboot, check the new current version of firmware with command debug res:ctisys cmd:l1pXb lsn:13 (where in place of X you have to write the value of a CTIP belonging to the PCIPOTS).

[13:12:42] ABILIS_CPX:debug res:ctisys cmd:l1p101b lsn:13

RES:CtiSys --------------------------------------------------------------------
       CTI_System_general_properties                                           
       BufferLength:64512  Date/Time:23/11/2015 13:12:12 TraceTime:496638388

PCIPOTS Firmware version

FPGA FW version:  25

Now the firmware version is 25.


82.17. How to upgrade UMTSBOX-2 firmware		82.19. How to upgrade POTSBOX firmware