82.27. How to open a SSH connection from Abilis

82.27. How to open a SSH connection from Abilis
	Chapter 82. HowTo - Management

The SSH server and client aren't activated by default; to activate it, refer to Section 82.25, “How to activate the Abilis SSH server”.

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

*a r pr:3 in:ssh out:ssh cdi: udi:ssh**	Transfer an incoming SSH session to an outgoing SSH session.
*a r pr:4 in: out:ssh cdi:* udi:ssh**	Transfer any incoming session to an outgoing SSH session.
save conf	Save the configuration.

To open a SSH connection from “ABILIS_1” to “ABILIS_2”, type the following commands.

[10:39:17] ABILIS_1:   <- type Ctrl+P to access to the TELNET server prompt of “Abilis_1”.

[192.168.1.1] TELNETS>clr

CLR 00 00

[192.168.1.1] TELNETS>1-ssh   <- to access to the SSH client prompt of “Abilis_1”.
COM

[192.168.2.1] SSHC>open 192.168.5.254   <- to open a connection to the remote host.
Trying 192.168.5.254 ... Open

User Access Verification

Password: *********
COM

Abilis CPX - Ver. 8.0.3/STD - Build 3961.10 - Branch 8.0 - Abilis-ID 800733
Monday 08/06/2015 15:31:56 (UTC+2.00)
Login:super
Password:
Logged as SUPERUSER

[10:40:59] ABILIS_2:

Note

	Note
If you are connected to “ABILIS_1” through an ISDN call, if you type the combination Ctrl+P, the Telnet server prompt of the Abilis that generate the call will be shown. To access to the SSH client of “ABILIS_1”, you have to type the 22n-ssh command, where n refers to the X25-n port that you have used for the connection. For example: [10:39:17] ABILIS_1: <- type Ctrl+P to access to the TELNET server prompt of the Abilis that generates the call. [192.168.1.1] TELNETS>`clr` CLR 00 00 [192.168.1.1] TELNETS>`221-ssh` <- to access to the SSH client prompt of “Abilis_1”. COM [192.168.2.1] SSHC>`open 192.168.5.254` <- to open a connection to the remote host. Trying 192.168.5.254 ... Open User Access Verification Password: `*****` COM Abilis CPX - Ver. 8.0.3/STD - Build 3961.10 - Branch 8.0 - Abilis-ID 800733 Monday 08/06/2015 15:31:56 (UTC+2.00) Login:`super` Password: Logged as SUPERUSER [10:40:59] ABILIS_2:

If you are connected to “ABILIS_1” through an ISDN call, if you type the combination Ctrl+P, the Telnet server prompt of the Abilis that generate the call will be shown.

To access to the SSH client of “ABILIS_1”, you have to type the 22n-ssh command, where n refers to the X25-n port that you have used for the connection. For example:

[10:39:17] ABILIS_1:   <- type Ctrl+P to access to the TELNET server prompt of the Abilis that generates the call.
                                    
[192.168.1.1] TELNETS>clr       

CLR 00 00

[192.168.1.1] TELNETS>221-ssh   <- to access to the SSH client prompt of “Abilis_1”. 
COM

[192.168.2.1] SSHC>open 192.168.5.254   <- to open a connection to the remote host.
Trying 192.168.5.254 ... Open

User Access Verification

Password: *********
COM

Abilis CPX - Ver. 8.0.3/STD - Build 3961.10 - Branch 8.0 - Abilis-ID 800733
Monday 08/06/2015 15:31:56 (UTC+2.00)
Login:super
Password:
Logged as SUPERUSER

[10:40:59] ABILIS_2:


82.26. How to open a TELNET connection from Abilis		82.28. How to activate the HTTP server