Chapter 71. HowTo - Networking
Part VI. HowTo
HowTo - Networking
Table of Contents
71.1. How to configure LAN settings
71.2. How to activate a new Ethernet port
71.3. How to assign several IP addresses to the same LAN port
71.4. How to configure ADSL connections using USB modems
71.4.1. How to configure a RFC 1483 connection
71.4.2. How to configure a PPPoA (RFC 2364) connection
71.4.3. How to configure a PPPoE connection
71.4.4. How to configure a IPoE connection with static IP
71.4.5. How to configure a IPoE connection with dynamic IP
71.5. How to configure HDSL/SHDSL connections using V.35/G.703 synchronous ports
71.6. How to configure CELLBOX or CELLKEY as gateway for Internet
71.7. How to configure CELLBOX or CELLKEY as backup for Internet
71.8. How to configure the default IP route
71.8.1. How to configure the default IP route in case Abilis is connected to an ADSL USB or V.35/G.703 modem
71.8.2. How to configure the default IP route in case Abilis is connected to an Ethernet ADSL router
71.8.3. How to configure an alternative default IP route
71.9. How to configure the Network Address Translation (NAT)
71.10. How to share a single Internet connection among multiple computers
71.11. How to access IP hosts and services which are behind a NAT manager (port forwarding)
71.12. How to setup DDNS service on Abilis
71.12.1. How to setup DDNS service using dyndns.org
71.12.2. How to setup DDNS service on Abilis
71.13. How to configure a Remote Access Server (RAS)
71.13.1. How to configure a RAS using IPSEC VPN server
71.13.2. How to configure a RAS using IPSEC VPN server with iPHONE
71.13.3. How to configure a RAS using PPPoE connections with an Ethernet/WiFi network
71.13.4. How to configure a RAS using ISDN network
71.14. How to configure an ISDN PPP Dial-UP connection
71.15. How to configure a VPN tunnel between two Abilis
71.15.1. How to configure a VPN tunnel where both Abilis have a static public IP address
71.15.2. How to configure a VPN tunnel where one Abilis has a dynamic public IP address or is placed behind a router doing NAT/PAT
71.15.3. How to configure a VPN tunnel with the “
backup over ISDN
” option
71.15.4. How to configure a VPN tunnel with the “
double path
” option
71.16. How to configure a voice tunnel between two Abilis
71.16.1. How to configure a voice tunnel where both Abilis have a static public IP address
71.16.2. How to configure a voice tunnel where one Abilis has a dynamic public IP address or is placed behind a router doing NAT/PAT
71.16.3. How to configure a voice tunnel with the “
backup over ISDN
” option
71.16.4. How to configure a voice tunnel with the “
double-path
” option
71.17. How to activate the DHCP resource
71.17.1. How to activate the DHCP in relay mode
71.17.2. How to activate the DHCP in server mode
71.17.3. How to activate the DHCP in client mode
71.18. How to activate the FTP server
71.19. How to activate the HTTP server
71.19.1. How to activate the HTTP over SSL server
71.20. How to activate the IP TRFA resource
71.21. How to use state detection of IP interfaces
71.22. How to activate the SNTP resource
71.22.1. How to activate the SNTP client
71.22.2. How to activate the SNTP server
71.23. How to activate the SNMP agent
71.24. How to publish the users on the Abilis LDAP server
