Chapter 72. HowTo - CTI system
Part VI. HowTo
HowTo - CTI system
Table of Contents
72.1. How to configure ISDN ports to connect PBX or ISDN lines
72.2. How to configure FXS (POTS) ports for analog telephones or FAX machines
72.3. How to configure PCphone
72.4. How to program a group of telephone lines
72.5. How to configure a multicast group of SIP phones
72.6. How to configure FAX modem relay parameter
72.7. How to create a VoIP tunnel
72.8. How to register an IAX telephone onto Abilis
72.9. How to register a SIP telephone onto Abilis
72.9.1. How to register a SIP phone supporting BLF onto Abilis
72.9.2. How to register a SIP telephone onto Abilis when the telephone is behind a NAT
72.10. How to register Abilis as a client of Asterisk
72.11. How to register Abilis as a client of a SIP server
72.12. How to configure the Speed Limit
72.13. How to configure OPC to collect call information from a remote Abilis
72.14. How to activate the Accounting service
72.15. How to enable pickup service for a POTS/ISDN port
72.16. How to enable pickup service for a SIP account
72.17. How to configure CTIDISA to implement a responder
72.17.1. Implementing a responder using MODE:INTRO
72.17.2. Implementing a responder using MODE:DISA
72.17.3. Getting a call on phones while the responder is active
72.17.4. Implementing a responder using MODE:ACD with 3 post selection
72.18. How to configure Last Calling Service
72.19. How to configure DATA CALL BACK using an CELL Key, calling an ISDN number
72.20. How to configure CTISMS to send SMS using the Web interface
72.21. How to configure CTISMS to send SMS via emails
72.21.1. Instructions to send emails through SMS
72.21.2. Instructions to send SMS through emails using a client
