Abilis CPX System Log file allows to register all the events pertinent to the global working mode.

The System Log is saved on the HD/CF in the file CPX.LOG (fixed size is 50 Kbytes) and updated every time that an event to save occurs. New events are stored and the oldest ones are progressively deleted.

The System Log can be displayed in a running Abilis using the following command. The command d l ? shows the syntax.

[14:49:52] ABILIS_CPX:d l

Current Local Time: Wednesday 22/04/2015 14:55:10 (UTC+2.00)

22/04/2015 14:00:30 [00103] -------------------- NEW RUN --------------------
22/04/2015 14:00:30 [00398] I: ABILIS CPX Ver. 8.0.2/STD - Build 3961.6
22/04/2015 14:00:30 [00079] I: MULTI-CPU MODE DISABLED FOR THIS HARDWARE
22/04/2015 14:00:30 [00079] I: USING 1 CPU
22/04/2015 14:00:30 [00474] I: CPU clock 1000 MHz
22/04/2015 14:00:32 [00362] I: WATCHDOG MFPCIGT FW Rev. 6
22/04/2015 14:00:32 [00459] I: ABILIS-ID:800733
22/04/2015 14:00:32 [00163] I: SYSTEM RESET
22/04/2015 14:00:32 [00195] I: CHKDSK C: OK
22/04/2015 14:00:33 [00371] I: LICENCE, LOADED
22/04/2015 14:00:33 [00374] W: LICENCE, NPVEXT DISABLED
22/04/2015 14:00:33 [00249] I: USB PCI16/3 EHCI EE105000 10
22/04/2015 14:00:33 [00248] I: USB PCI16/0 UHCI E400 15
22/04/2015 14:00:33 [00248] I: USB PCI16/1 UHCI E500 11
22/04/2015 14:00:33 [00248] I: USB PCI16/2 UHCI E600 12
22/04/2015 14:00:37 [00079] BSE-1 ELTI-1 ST:dn
22/04/2015 14:00:37 [00242] I: BSE-1 DSP:0 DWNL OK
22/04/2015 14:00:43 [00071] TRACE ACTIVATED
22/04/2015 14:00:44 [00291] I: DSP test start
22/04/2015 14:00:44 [00292] I: DSP test end
22/04/2015 14:00:44 [00286] I: CTIR ENABLED
22/04/2015 14:00:44 [00055] SYSTEM STARTED
22/04/2015 14:00:44 [00058] CONF:ACCEPTED
22/04/2015 14:00:45 [00428] I: MfIo-1 ST:RD
22/04/2015 14:00:45 [00436] I: MfTemp-1 ST:RD
22/04/2015 14:00:45 [00091] I: Pad-1 L1-ST:dn DCD:dn DTR:UP
22/04/2015 14:00:45 [00411] I: Nat-1 ST:RD
22/04/2015 14:00:45 [00345] I: Dhcp-1 ST:RD
22/04/2015 14:00:45 [00180] I: CtiP-31 L1-ST:dn
22/04/2015 14:00:45 [00182] I: CtiP-31 SapiX25:in
22/04/2015 14:00:45 [00180] I: CtiP-32 L1-ST:dn
22/04/2015 14:00:45 [00182] I: CtiP-32 SapiX25:in
22/04/2015 14:00:45 [00180] I: CtiP-33 L1-ST:dn
22/04/2015 14:00:45 [00182] I: CtiP-33 SapiX25:in
22/04/2015 14:00:45 [00180] I: CtiP-34 L1-ST:dn
22/04/2015 14:00:45 [00182] I: CtiP-34 SapiX25:in
22/04/2015 14:00:45 [00095] I: Eth-1 ST:NG
22/04/2015 14:00:45 [00090] I: X25-999 Layer3:down
22/04/2015 14:00:45 [00089] I: X25-999 Layer2:cg  
22/04/2015 14:00:45 [00092] I: X25-999 PLink:ln SLink:RD
22/04/2015 14:00:45 [00461] I: NPv-1 ST:UP
22/04/2015 14:00:45 [00462] I: NPvl-1    P1:dn P2:-  B:-  B-C:- 
22/04/2015 14:00:45 [00092] I: Ip-7 PLink:d1 SLink:ln
22/04/2015 14:00:45 [00346] I: DhcpC-1 ST:RD
22/04/2015 14:00:45 [00092] I: Pv-1 PLink:d1 SLink:ln
22/04/2015 14:00:45 [00092] I: Ip-6 PLink:d1 SLink:ln
22/04/2015 14:00:45 [00095] I: Eth-3 ST:NG
22/04/2015 14:00:45 [00095] I: Eth-2 ST:RD
22/04/2015 14:00:45 [00406] I: Trfa-1 ST:RD
22/04/2015 14:00:45 [00492] I: Ups-1 USB-ST:ds
22/04/2015 14:00:45 [00493] I: Ups-1 POWER:na BATT:na
22/04/2015 14:00:45 [00062] CONF:BACKUP
22/04/2015 14:00:45 [00104] AUTO SAVE IN PROGRESS
22/04/2015 14:00:45 [00092] I: Ip-7 PLink:d2 SLink:ln
22/04/2015 14:00:46 [00092] I: Ip-6 PLink:d2 SLink:ln
22/04/2015 14:00:47 [00107] AUTO SAVE OK
22/04/2015 14:00:50 [00462] I: NPvl-1    P1:UP P2:-  B:-  B-C:- 
22/04/2015 14:01:10 [00092] I: Ip-7 PLink:RD SLink:ln
22/04/2015 14:01:10 [00092] I: Ip-6 PLink:RD SLink:ln
22/04/2015 14:03:44 [00462] I: NPvl-1    P1:dn P2:-  B:-  B-C:- 
22/04/2015 14:03:53 [00462] I: NPvl-1    P1:UP P2:-  B:-  B-C:- 

	Tip
	Interesting chapters: Section 84.1, “System Log messages”.

System Log events can be simultaneously sent to the current Control Port session typing the following command.

[14:57:58] ABILIS_CPX:start l

Current Local Time: Wednesday 22/04/2015 14:58:02 (UTC+2.00)

Start System Log content real-time logging (Type CTRL+C + ENTER to stop):

22/04/2015 14:59:10 [00092] I: Ip-7 PLink:RD SLink:ln
22/04/2015 14:59:10 [00092] I: Ip-6 PLink:RD SLink:ln

The System Log content can be cleared using the command c l.

Tip

The command allows to display the log file of another version: [14:57:59] ABILIS_CPX:d l ? D L [ver] [dd/mm/yyyy] [hh:mm:ss] [LAST:val] [F:val] Display System Log <ver> String corresponding to a version directory in <Optional> the form [x.y.z or x-y-z or y.z or y-z or y]. (E.g.: 5.3.1 or 6-1-0 or 2189). dd/mm/yyyy Starting date <Optional> hh:mm:ss Starting time <Optional> LAST: Select the display staring position [RUN, 1..999]: <Optional> - LAST:RUN display only events logged in the last run plus five events of the previous run (if any). - LAST:nnn display last 'nnn' events, where 'nnn' range is [1..999]. F: Filtering string. Case-insensitive match. <Optional> Scan the message for the occurrence of the given substring. From 1 up to 70 Alphanumeric extended characters. Spaces are allowed. Strings holding spaces must be written between quotation marks (E.g.: F:"str1 str2").