10.2. CTI routing configuration
Prev Chapter 10. POTS card Next

10.2. CTI routing configuration

Calls directed to POTS Card are routed in transparent mode.

10.2.1. CTI Routing table configuration

Assume that:

  • Abilis has the following CTI ports configuration: ports 101 and 102 are toward the PBX;

Type the following command to verify CTI ports group configuration:

[18:12:13] ABILIS_CPX:d ctig

----------------------------------+------------------------------------------------
ID: [DESCR:]
    S: R:                 MC: P:  |P1       P2       P3       P4       P5       ...
                                  |...      P62      P63      P64
    [Px:         CDO:  CGO:  SDO:  SGO:  RGO:  SP:  CODERS:  DJ:  MJ:  T301:      ]
----------------------------------+------------------------------------------------
0   [Iax/Sip/Disa/Vo group (Read Only)]
    R  ST                 MAX NO  |Iax      Sip      Disa     Vo       .        
----------------------------------+------------------------------------------------
1   M  ST                 MAX YES |101      102      .        .        .        
----------------------------------+------------------------------------------------
2   [to_ISDN_line]
    R  ST                 MAX NO  |33       34       .        .        .        
----------------------------------+------------------------------------------------

10.2.1.1. CTIR from ISDN ports to CTI Ports

The following routings allow to route calls coming from ISDN line ports (G2) toward the POTS ports (G1).

[18:22:32] ABILIS_CPX:a ctir pr:3 poi:g2 out:g1

COMMAND EXECUTED

[18:23:40] ABILIS_CPX:d ctir

Last change: 17/06/2015 08:36:47 CET

---+------+-----------------+---------+--------------------+--------------------
PR |[DESCR]
   |BCI   |POI |SR      |GI |OUT      |CDI                 |CDO
ACT|NEXT        |LAST       |EEC |T301|CGI                 |CGO
EDT|SP    |SC   |DJ   |MJ   |FMDJ|FMMJ|SDI                 |SDO
   |SPOUT |SCOUT|DJOUT|MJOUT|LCS |LCST|SGI                 |SGO
   |                        |BCO      |RGI                 |RGO
   |FMRLY |FAXSP|MODSP|FMLVL|ECM |UDT |IG  |OG  |SG        |DL  |DH
   |CODERS
   |CODERSOUT
   |TI1 .. TI5
--------------------------------------------------------------------------------
... 
--------------------------------------------------------------------------------
3   VOICE  G2   #        #   G1        *                    *                   
--------------------------------------------------------------------------------

The routing PR:3 routes calls coming from G2 ports toward POTS ports group G1.

[Tip]Tip

Interesting chapter: Section 49.5, “CTI Router Overview”.

Prev Up Next
10.1. POTS-X device activation Home 10.3. How to upgrade POTS card firmware