| 56.4. CTIVO diagnostics and statistics | ||
|---|---|---|
 | Chapter 56. CTIVO - Virtual Office |  |
| 56.4. CTIVO diagnostics and statistics | ||
|---|---|---|
| | Chapter 56. CTIVO - Virtual Office | |
To display the diagnostics of the CTIVO resource the following commands are used:
Shows diagnostic information, such as the state of the resource, the currently used channels, the currently active CTIVO user etc.
Shows diagnostic information in an extended format: the same information listed for d d ctivo command and the calling and the called number, the state of call etc.
[10:21:09] ABILIS_CPX:d d ctivo
RES:CtiVo ---------------------------------------------------------------------
CTI_Virtual_Office
STATE:ACTIVE SESNUM:5 CUR-SESNUM:1
------------------------------------------------------------------------
SES: USER: Routing-State: UsedChannels:
------------------------------------------------------------------------
0 test - 2
1 - 0
2 - 0
3 - 0
4 - 0
[10:21:26] ABILIS_CPX:d de ctivo
RES:CtiVo ---------------------------------------------------------------------
CTI_Virtual_Office
STATE:ACTIVE SESNUM:5 CUR-SESNUM:1
------------------------------------------------------------------------
SES: USER: Routing-State: UsedChannels:
CH: Side: VO-State: UsedAdapters:
CtiEvent VoCommands Media
AD: CG CD Type Dtmf
Q931-State Aux-Q932-State V-Aux-Q932-State
CtiEvent VoCommands Media
------------------------------------------------------------------------
0 test - 2
0 USER READY 1
Enabled Enabled Enabled
0 AP -
10-CONNECTED IDLE IDLE
Enabled Enabled Enabled
1 NET - 1
Enabled Enabled Enabled
0 736 555 CTIR -
10-CONNECTED IDLE IDLE
Enabled Enabled Enabled
------------------------------------------------------------------------
1 - 0
------------------------------------------------------------------------
2 - 0
------------------------------------------------------------------------
3 - 0
------------------------------------------------------------------------
4 - 0
------------------------------------------------------------------------To display the statistics of the CTIVO resource the following commands are used:
Shows statistic information, such as the number of calls, the number of call transfers, the number of calls put on hold, the number of registered calls etc.
Shows statistic information in an extended format: the same information listed for d se ctivo command are shown for each session.
[10:25:39] ABILIS_CPX:d s ctivo
RES:CtiVo ---------------------------------------------------------------------
CTI_Virtual_Office
--- Cleared 0 days 00:23:29 ago, on 20/07/2016 at 10:02:11 -------------
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
CALL | 1| |HOLD | 0| |
CALL-CLOSE | 2| |UNHOLD | 0| |
CALL-TRANSF| 0| |RECORD | 0| |
CALLBACK | 0| |RECORD-STOP| 0| |
CALL-SWITCH| 0| |DTMF-OUTB | 0| |
MIXCTIC | 0| | | | |
CALL-SUCC | 1| |CALL-CUR | 1| |
CALL-SEQ | 0| |CALL-FORK | 0| |
NOCHAN | 0| 0|DTMF-INB | 0| |
DENIED-IP | 0| |BANNED-IP | 0| |
------------------------------------------------------------------------[10:25:40] ABILIS_CPX:d se ctivo
RES:CtiVo ---------------------------------------------------------------------
CTI_Virtual_Office
--- Cleared 0 days 00:24:28 ago, on 20/07/2016 at 10:02:11 -------------
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
CALL | 1| |HOLD | 0| |
CALL-CLOSE | 2| |UNHOLD | 0| |
CALL-TRANSF| 0| |RECORD | 0| |
CALLBACK | 0| |RECORD-STOP| 0| |
CALL-SWITCH| 0| |DTMF-OUTB | 0| |
MIXCTIC | 0| | | | |
CALL-SUCC | 1| |CALL-CUR | 1| |
CALL-SEQ | 0| |CALL-FORK | 0| |
NOCHAN | 0| 0|DTMF-INB | 0| |
DENIED-IP | 0| |BANNED-IP | 0| |
------------------------------------------------------------------------
SES:0 USER:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
CALL | 0| |HOLD | 0| |
CALL-CLOSE | 1| |UNHOLD | 0| |
CALL-TRANSF| 0| |RECORD | 0| |
CALLBACK | 0| |RECORD-STOP| 0| |
CALL-SWITCH| 0| |DTMF-OUTB | 0| |
MIXCTIC | 0| | | | |
CALL-SUCC | 1| |CALL-CUR | 1| |
CALL-SEQ | 0| |CALL-FORK | 0| |
NOCHAN | 0| 0|DTMF-INB | 0| |
------------------------------------------------------------------------
SES:1 USER:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
CALL | 0| |HOLD | 0| |
CALL-CLOSE | 0| |UNHOLD | 0| |
CALL-TRANSF| 0| |RECORD | 0| |
CALLBACK | 0| |RECORD-STOP| 0| |
CALL-SWITCH| 0| |DTMF-OUTB | 0| |
MIXCTIC | 0| | | | |
CALL-SUCC | 0| |CALL-CUR | 0| |
CALL-SEQ | 0| |CALL-FORK | 0| |
NOCHAN | 0| 0|DTMF-INB | 0| |
------------------------------------------------------------------------
SES:2 USER:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
CALL | 0| |HOLD | 0| |
CALL-CLOSE | 0| |UNHOLD | 0| |
CALL-TRANSF| 0| |RECORD | 0| |
CALLBACK | 0| |RECORD-STOP| 0| |
CALL-SWITCH| 0| |DTMF-OUTB | 0| |
MIXCTIC | 0| | | | |
CALL-SUCC | 0| |CALL-CUR | 0| |
CALL-SEQ | 0| |CALL-FORK | 0| |
NOCHAN | 0| 0|DTMF-INB | 0| |
------------------------------------------------------------------------
SES:3 USER:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
CALL | 0| |HOLD | 0| |
CALL-CLOSE | 0| |UNHOLD | 0| |
CALL-TRANSF| 0| |RECORD | 0| |
CALLBACK | 0| |RECORD-STOP| 0| |
CALL-SWITCH| 0| |DTMF-OUTB | 0| |
MIXCTIC | 0| | | | |
CALL-SUCC | 0| |CALL-CUR | 0| |
CALL-SEQ | 0| |CALL-FORK | 0| |
NOCHAN | 0| 0|DTMF-INB | 0| |
------------------------------------------------------------------------
SES:4 USER:
-----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
CALL | 0| |HOLD | 0| |
CALL-CLOSE | 0| |UNHOLD | 0| |
CALL-TRANSF| 0| |RECORD | 0| |
CALLBACK | 0| |RECORD-STOP| 0| |
CALL-SWITCH| 0| |DTMF-OUTB | 0| |
MIXCTIC | 0| | | | |
CALL-SUCC | 0| |CALL-CUR | 0| |
CALL-SEQ | 0| |CALL-FORK | 0| |
NOCHAN | 0| 0|DTMF-INB | 0| |
------------------------------------------------------------------------To show the log of virtual office just issue the command d ctivo log
[15:54:16] ABILIS_CPX:d ctivo log
CURRENT EVENTS LOG MASK: DFT
Current Local Time: Friday 03/07/2015 14:27:18 (UTC+2.00)
DATE TIME Event SES CHAN ADAP AP Description
------ ------ ----- --- ---- ---- --- ------------------------------------------
020715 215945 Info - - - 001 OKAPI Reg user test
020715 215953 Info 000 - - - Open session for user test
020715 215953 Info 000 U000 A000 001 CALL command issued
020715 220056 Info 000 U000 A000 001 CLOSE command issued
To set the filter event use s ctivo log event:<filter>
[15:55:22] ABILIS_CPX:s ctivo log event: ?S CTIVO LOG EVENT:val Set CTIVO log events filter EVENT: CtiVo log events filter [ERR, INFO, DBG] or [DFT, FULL], where - ERR, INFO, DBG filters can be joined using "," operator; - DFT: means ERR and INFO events; - FULL: means every type of event. By default the event mask is set to 'DFT'. [15:55:46] ABILIS_CPX:s ctivo log event:fullCOMMAND EXECUTED
The filter used at the startup of the Abilis may be set via the following parameter:
[15:55:22] IMBOURNE:s p ctivo volog:fullCOMMAND EXECUTED [15:55:22] IMBOURNE:init res:ctivoCOMMAND EXECUTED
Finally to clear the log use c ctivo log.
[15:55:25] ABILIS_CPX:c ctivo log
COMMAND EXECUTED| |  | |
| 56.3. CTIVO routings |  | 56.5. Easy configuration guide |