73.10. How to automatically reassign the USBPORTID
Enter into the Abilis
control-program and type the command d dev to
view the list of devices.
Abilis automatically assign a USB port id when a USB device is added
and plugged.
[17:49:02] ABILIS_CPX:d dev
...
------------------ Active USB Devices and Physical Resources: -----------------
Device(s) Run Con Physical Resource(s) or CTI Port(s) USBPORTID
-------------------------------------------------------------------------------
DSLUSB-1 Yes Yes Dsl-1 . . . . . . . . . . . . . . . . 3.0
DSLUSB-2 No No Dsl-2 . . . . . . . . . . . . . . . . 1.0.0
DSLUSB-3 Yes Yes Dsl-3 . . . . . . . . . . . . . . . . 1.1
DSLUSB-4 Yes Yes Dsl-4 . . . . . . . . . . . . . . . . 2.0
GPIO-1 Yes Yes Gpio-1 . . . . . . . . . . . . . . . . 4.0
BLUSB-1 Yes No Blusb-1 . . . . . . . . . . . . . . . -
...
The usbportid can't change on-the-fly plugging and unplugging a
device on a different port. If connecting a device on a different port is
needed, follow the below steps to reconfigure the
USBPORTID parameter:
