73.18. How to upgrade POTSHUB card firmware

73.18. How to upgrade POTSHUB card firmware
	Chapter 73. HowTo - Management

Before upgrading the POTSBOX firmware it's necessary to verify and upgrade the POTSHUB firmware. Use the following command debug res:ctisys cmd:l1pX lsn:13 (where in place of X you have to write the value of a CTIP belonging to the POTSBOX) to check the current version of firmware.

[14:44:53] ABILIS_CPX:d dev

------------------ Active PCI Devices and Physical Resources: -----------------
Device(s)   Run Physical Resource(s) or CTI Port(s)          SlotId  Addr  Irq
-------------------------------------------------------------------------------
ASY-1       Yes Async-1  . . . . . . . . . . . . . . . . . .      -   3F8    4
ETH-1       Yes Eth-1  . . . . . . . . . . . . . . . . . . .     18   PCI (  5)
ETH-2       Yes Eth-2  . . . . . . . . . . . . . . . . . . .    136   PCI (  5)
QPRI-1      Yes 1..4 . . . . . . . . . . . . . . . . . . . .    100   PCI ( 11)
POTSHUB-1   Yes  . . . . . . . . . . . . . . . . . . . . . .    101   PCI (  5)
 POTSBOX-1  Yes 101..132 . . . . . . . . . . . . . . . . . .      -   PCI (  -)
 POTSBOX-2  Yes 133..164 . . . . . . . . . . . . . . . . . .      -   PCI (  -)
 POTSBOX-3  Yes 165..196 . . . . . . . . . . . . . . . . . .      -   PCI (  -)
 POTSBOX-4  Yes 197..228 . . . . . . . . . . . . . . . . . .      -   PCI (  -)
POTSHUB-2   Yes  . . . . . . . . . . . . . . . . . . . . . .    102   PCI (  5)
 POTSBOX-5  Yes 229..260 . . . . . . . . . . . . . . . . . .      -   PCI (  -)

...

[15:02:36] ABILIS_CPX:debug res:ctisys cmd:l1p101 lsn:13

RES:CtiSys --------------------------------------------------------------------
       CTI_System_general_properties                                           
       BufferLength:74     Date/Time:23/11/2015 15:15:49 TraceTime:788283826

PCI POTSHUB Card Driver: FPGA firmware version

FPGA FW version:  8.28

The updating steps:

Go to http://support.abilis.net/ and download the latest firmware.
Upload the POTSHUB.BIN into the CPX working directory without changing the file name. The upload can be done using the file put command (with ZMODEM: file put z potshub.bin) or the FTP resource.

Issue the command debug res:ctisys cmd:l1pX lsn:999, where in place of X you have to write the value of a CTIP belonging to the POTSBOX that you want to update and wait until the firmware upload ends. Example:

[15:02:28] ABILIS_CPX:debug res:ctisys cmd:l1p101 lsn:999

RES:CtiSys --------------------------------------------------------------------
       CTI_System_general_properties                                           
       BufferLength:63     Date/Time:23/11/2015 15:21:25 TraceTime:788619521

PCI POTSHUB Card driver: FW Upload
...

In the presence of additional POTSHUB should be performed once for each POTSHUB present (e.g. debug res:ctisys cmd:l1p229 lsn:999, etc.).
Reboot the Abilis (i.e. With warm start command).

After reboot, check the new current version of firmware with command debug res:ctisys cmd:l1p101 lsn:13 (where in place of X you have to write the value of a CTIP belonging to the POTSBOX).

[15:22:36] ABILIS_CPX:debug res:ctisys cmd:l1p101 lsn:13

RES:CtiSys --------------------------------------------------------------------
       CTI_System_general_properties                                           
       BufferLength:74     Date/Time:23/11/2015 15:22:49 TraceTime:788283826

PCI POTSHUB Card Driver: FPGA firmware version

FPGA FW version:  8.68

Now the firmware version is 8.68.


73.17. How to upgrade POTSBOX firmware		73.19. How to upgrade RJS firmware