74.1. How to configure LAN settings

The Eth-1 port is activated by default with the following configuration:

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

s p ip-1 ipadd:192.168.1.1 mask:255.255.255.0

or

s p ip-1 ipadd:192.168.1.1/24

Change the IP address and the mask.

Change the IP address and the mask in Slash Notation.

save confSave the configuration.

On a working Abilis, you must initialize the IP-1 resource: init res:ip-1.

[Caution]Caution

If you are connected to Abilis through TELNET or SSH protocol, when you execute the initialization command, the connection will be lost!