74.6. How to change the MAC address of the Ethernet or EthernetUSB interface

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

s p eth-3 mac-addr:00-E0-4C-20-04-28

or

s p ethusb-1 mac-addr:00-E0-4C-20-04-29

Change the MAC address for Ethernet interface (e.g. Eth-3).

or

Change the MAC address for EthernetUSB interface (e.g. EthUsb-1).

save confSave the configuration.
init res:eth-3

or

init res:ethusb-1

Initialize the Ethernet resource (e.g. Eth-3).

or

Initialize the EthernetUSB resource (e.g. EthUsb-1).

[Warning]Warning

Broadcast and multicast addresses aren't allowed.