83.1. RASPPPoE driver for Windows

83.1. RASPPPoE driver for Windows
	Chapter 83. PPPoE clients

83.1.1. Installing RASPPPOE drivers

Go to http://www.raspppoe.com/ and download RASPPPOE driver from Download & install section.

Extract the RASPPPOE driver file.
If you are running Windows 2000, right-click the My Network Places icon on your desktop and select Properties to bring up the Network and Dial-up Connections window.
If you are running Windows XP/2003, click the Start button, select Control Panel, then click Network and Internet Connections, and then click the Network Connections control panel icon to bring up the Network Connections window. Go to the menu and select View then Details to get a detailed view of the network connections on your machine.
You should find one or more Local Area Connection objects. Locate the one for the network adapter for which you want to install PPPoE driver, right-click it and select Properties.
In the Properties dialog box, click the Install... button.
In the Select Network Component Type window, select Protocol and click the Add... button. (Note: It could take a few seconds for the following window to come up.)
In the Select Network Protocol window, click the Have Disk... button.
In the Install From Disk window, either type the name of your temporary installation directory or click the Browse... button to navigate to it (it does not matter which of the INF files you select, Windows will automatically pick the right one later). Then click the OK button. A new window opens, offering the PPP over Ethernet Protocol for installation. Click OK to start installing the protocol.
During installation, a window titled Digital Signature Not Found (Windows 2000) or Hardware Installation (Windows XP/2003) may come up several times (typically four times per installed network adapter), warning you that the driver has no digital signature or Windows Logo. Make sure you click Yes (Windows 2000) or Continue Anyway (Windows XP/2003) every time you are prompted to allow successful installation of the protocol.
Back at the Local Area Connection Properties window, click Close to close the window.

83.1.2. Creating PPPoE Dial-Up connections

Follow these instructions.

Click the Start button on the taskbar and select Run....
Into the Run dial-box type raspppoe and click the OK button to run the Dial-Up connection Setup application.
A dialog box comes up with a combo box labeled Query available PPP over Ethernet Services through Adapter: at the top. Select the network adapter from the list. If the protocol is only operating on one network adapter, the box will be grayed out as there is no choice to make.
There are two connection modalities:
- Connection WITHOUT “SERVICENAME” indication (Dynamic IP Address):
  - Click the Create a Dial-Up Connection for the selected Adapter button. Shortly afterwards, a shortcut to the new dial-up connection named Connection through <Adapter Name> should show up on your desktop.
  - After you have created the connection(s) you need, click the Exit button to quit the application.
- Connection WITH “SERVICENAME” indication (Static IP Address):
  - Click the Create a Dial-Up Connection for the selected Adapter button. Shortly afterwards, a shortcut to the new dial-up connection named Connection through <Adapter Name> should show up on your desktop.
  - After you have created the connection(s) you need, click the Exit button to quit the application.
  - Double-click the desktop icon for the dial-up connection you created.
  - Click the Properties button.
  - In the Telephone Number field the ACNAME parameter configured in Abilis should be already present. If it isn't present, insert it and after “\” add the SERVICENAME configured in Abilis. (e.g. for ACNAME:wlan and SERVICENAME:user_1, the Telephone Number will be: wlan\user_1).
  - Click OK button to confirm.
Double-click the desktop icon for the dial-up connection you created.
In the Connection to <Connection Name> window, enter the USERNAME and PASSWORD configured in Abilis (USER and PWD parameter in the Users Table).
Click the Dial button to start the connection.

	Tip
	For more information go to http://www.raspppoe.com/.

	Tip
	Refer to Section 74.19.3, “How to configure a RAS using PPPoE connections with an Ethernet/WiFi network” to know how to configure Abilis.