| 6.8. General and system information | ||
|---|---|---|
 | Chapter 6. Command language |  |
| 6.8. General and system information | ||
|---|---|---|
| | Chapter 6. Command language | |
This command shows general parameters about the system (i.e. System start-up elapsed time, date and time, customizable description fields, time zone…).
Not all the shown parameters can be changed; the note “<Read Only>” refers the not modifiable ones.
[11:38:04] ABILIS_CPX:d g------------------------ System General Parameters ---------------------------- ----------------------+----- Setup and debug -------+-------------------------- tact: YES (YES) | listitems: 4000 (4000) | stackovh: 0 (0) TSAVE: YES (YES) | listmem: 630 (630) | hookact: NO (NO) ldmsize: 50 (50) | sound: ON (YES) | HOOKTHR: 50 (50) LDM-FILTER: ALL LDM-SYSLOG: ALL ---------------------- Settings and identification ---------------------------- TIMEZONE: CET - Central Europe (Rome, Paris, Berlin, Prague, Brussels) SYSNAME: LOCATION: CONTACT: USER1: USER2: ----------------------------- Mail defaults ----------------------------------- SYS-MAIL-FROM: AUTO (abilis@abilis_cpx__) SYS-MAIL-TO: SYS-MAIL-TO-LIST: # SYS-MAIL-BODY: STANDARD ----------------------------- Compact Flash ----------------------------------- CF-MODE: NORMAL <Read Only> CF-MIRROR: # (Mirror schedule not set) CF-MAIL-FROM: SYS (abilis@abilis_cpx__) CF-MAIL-TO: SYS () CF-MAIL-TO-LIST: SYS (#) CF-MAIL-BODY: SYS (STANDARD) ----------------------------- Information ------------------------------------- SYSUPTIME: 0 days 06:13:52 (Friday 14/09/2018 07:44:55) <Read Only> DATE&TIME: Friday 14/09/2018 13:58:47 (UTC+02:00) <Read Only> CPU: 2 <Read Only> HWINT: MFLPT-2/3 <Read Only> ABILIS-ID: 1800310 <Read Only> ------------------------------- Reboot ---------------------------------------- SYSRBDELAY: # (System reboot delay not set) SYSRBCOND: # (System reboot condition not set)
Setup and debug section
The meaning:
tactTRACE activation at boot [NO, YES].
TSAVEAutomatic TRACE saving [NO, YES]. It is always activated run time.
ldmsizeSize of Debug Log in Memory [50..1024 Kibyte].
listitemsNumber of CPX list items [4000..50000]. It must be multiple of 1000.
listmemMemory cost of the Number of CPX list in Kibyte. <Read Only>
soundAlarm sound enable/disable [OFF, ON].
stackovhTask stack overhead [0, 256..99999 byte]. The default value is 0 and should be changed only in case of special debug needs by Abilis developers.
hookactTask hook activation at boot [NO, YES].
HOOKTHRThreshold of the execution time without task triggered by task hook [1..255 ms].
LDM-FILTERFilter events registered in Debug Log [DIAG, COR, Q931, CTIR, SMS, PPP, MLM, ML, ALL]. Filters can be joined using ',' (comma) (i.e.: COR,MLM,...).
LDM-SYSLOGFilter debug events sent to SYSLOG [DIAG, COR, Q931, CTIR, SMS, PPP, MLM, ML, ALL]. Filters can be joined using ',' (comma) (i.e.: COR,MLM,...).
Settings and identification section
The meaning:
TIMEZONETime zone [UDF, GMT, ICE, WET, CET, EET, MSK, ICT, AST, EST, CST, MST, PST, WAT, CAT, SAST, EAT]. See also HELP TIMEZONES.
TZOFFSETTime zone offset vs. UTC [UTC+hh.mm or UTC-hh.mm]. <Only for TIMEZONE:UDF>
DSTOFFSETChange to Daylight Savings Time [# or dd/mm hh:mm]. <Only for TIMEZONE:UDF>
TOSTDTIMEChange to Standard Time [# or dd/mm hh:mm]. <Only for TIMEZONE:UDF>
SYSNAMEThis Abilis fully qualified domain name. Max 64 ASCII characters. Space not allowed.
LOCATIONPhysical location of this Abilis. Max 64 ASCII characters. Space not allowed.
CONTACTName of contact person and how to contact them. Max 64 ASCII characters. Space not allowed.
USER1User defined string #1. Max 64 ASCII extended characters.Spaces require double quotes.
USER2User defined string #2. Max 64 ASCII extended characters.Spaces require double quotes.
In this section it is possible to specify system mail defaults that can be used in any service when the correspondent value is set to "SYS".
The meaning:
SYS-MAIL-FROMDefault e-mail sender. AUTO or a valid e-mail address.
AUTO: a fixed value is used (e.g.
abilis@<CP prompt>).
e-mail address: max 128 ASCII
chars. Space not allowed.
SYS-MAIL-TODefault e-mail recipients. Empty or max 128 ASCII characters. Space not allowed.
SYS-MAIL-TO-LISTDefault E-mail recipients list. # or
the name of a TXT list.
SYS-MAIL-BODYDefault e-mail body type [STANDARD,
SMS-LIKE].
![[Tip]](../images/tip.png) | Tip |
|---|---|
Interesting chapter: Section 5.2, “Double CF handling”. |
The meaning:
CF-MODECurrent Compact Flash management mode. <Read Only>
See SYS CFMODE INFO|LOG|SET|RECOVERY commands.
CF-MIRRORSchedule mirror of the system disk C:
[# or hh:mm]:
# or NONE: a
fixed value is used (e.g. abilis@<CP
prompt>).
hh:mm: the system mirror will be
executed every day at the specified time 'hh' [0..23],
'mm' [0..59].
CF-MAIL-FROME-mail sender. SYS or
AUTO or a valid e-mail address.
SYS: use value configured in
SYS-MAIL-FROM;
AUTO: a fixed value is used (e.g.
abilis@<CP prompt>).
e-mail address: max 128 ASCII
chars. Space not allowed.
CF-MAIL-TOE-mail recipients. SYS or empty or
max 128 ASCII characters. Space not allowed.
CF-MAIL-TO-LISTDefault E-mail recipients list.
#
CF-MAIL-BODYE-mail body type [SYS,
STANDARD,
SMS-LIKE].
Reboot section
The meaning:
System reboot delay [# or
hh:mm]:
# or NONE:
system reboot delay not set;
hh:mm: the system will reboot
after the specified delay, where 'hh' [0..2400], 'mm'
[0..59].
System reboot condition [NONE or
#, NOCALL]:
# or NONE:
system reboot condition is not set;
NOCALL: the system will reboot as
soon as all CTI calls are closed.
This command displays the software version currently in use on the Abilis CPX, information about system memory and files on the disk.
[11:38:04] ABILIS_CPX:d iAbilis CPX - Ver. 8.7.0/STD - Build 4431.5 - Branch 8.7 - 06/11/2018 (c) 1994/2018 - Abilis ABILIS-ID: 800733 Free/Total Memory (in byte): 85,084,712/528,482,304 Free/Used/Total HD/CF space (in Kibyte): 401,698/91,256/492,954 File Version Date Time Size Note ------------------------------------------------------------------------------- CPX.RTB ....... 06/11/2018 18:29:10 7110068 BM.RTB 2053 06/11/2018 18:29:08 283094 DRIVERS.CFG 8.7 07/11/2018 08:38:48 61440 Ok DRIVERS.BCK 8.7 07/11/2018 08:38:48 61440 Ok PROVISIO.CFG ....... .......... ........ .......... Not found FACTORY.CFG ....... .......... ........ .......... Not found CPX.LOG 1.0 07/11/2018 08:38:56 51200 CPX.DBG 2.0 07/11/2018 08:38:10 1048576 CPX.XCP ....... 07/11/2018 08:38:06 51200 BSXXXI.BIN 2.6 14/08/2015 12:33:24 109568 BSXXXV.BIN 2.2 14/08/2015 12:33:24 108544 ESB2.BIN 13.0 14/08/2015 12:33:24 17408 D1K.BIN 312.9 14/08/2015 12:33:24 1024 D1C4F3.BIN 312.9 14/08/2015 12:33:22 100352 D1C5F3.BIN 312.9 14/08/2015 12:33:24 100352 D2K.BIN 312.9 14/08/2015 12:33:24 1024 D2C4F3.BIN 312.9 14/08/2015 12:33:24 102400 D2C4F6.BIN 312.9 14/08/2015 12:33:24 102400 HFC2E4.BIN 21.0 14/08/2015 12:33:24 16384 HFC2E8.BIN 21.0 14/08/2015 12:33:24 16384 HFC3E4.BIN 57.0 14/08/2015 12:33:24 83968 HFC3E8.BIN 57.0 14/08/2015 12:33:24 83968 QPRI2B.BIN 5.0 14/08/2015 12:33:24 17408 QPRI2E.BIN 6.0 14/08/2015 12:33:24 17408 CTIHA2.BIN 8.0 14/08/2015 12:33:24 18432 D64A.BIN 33.22 14/08/2015 12:33:24 73728 D64V.BIN 8.15 14/08/2015 12:33:24 143360 QPRIX.BIN 33.0 14/08/2015 12:33:24 241664 OCTASIC.BIN 16.0 14/08/2015 12:33:24 175104 WING-P.BIN 1.0 14/08/2015 12:33:24 264192 SL-IT.BIN 1.0 14/08/2015 12:33:24 1024 SRVSSL.CER ....... 07/04/2017 20:38:40 832 CLISSL.CER ....... 07/04/2017 20:38:40 824 SRVSSL.KEY ....... 07/04/2017 20:38:40 981 CLISSL.KEY ....... 07/04/2017 20:38:40 981 Other system relevant files: File Version Date Time Size Note ------------------------------------------------------------------------------- C:\LICENCE\LIC1-0000800733.TXT ....... 19/09/2016 12:28:28 350 C:\APP\CTI\ADDRBOOK\ADDRBOOK-3-0.DAT 3.0 26/12/2017 12:11:50 1536082 C:\APP\CTI\LCS\LCSTABLE.DAT 1.0 07/11/2018 08:37:52 60066 C:\APP\DHCP\DHCP.BND 1.0 07/11/2018 08:38:34 25600 C:\APP\IKE\IKE.CNS 1.0 11/12/2017 16:37:14 1024 C:\APP\DNS\BLACKLIST.DAT 1.0 10/08/2015 14:43:50 66 C:\APP\DNS\WHITELIST.DAT 1.0 15/05/2018 16:05:36 66 Other files in 'C:\8-7-0': File Date Time Size Note -------------------------------------------------------------------------------
The first part of the output is dedicated to the information about version and release date of the software.
The second one shows information about Abilis CPX serial number, system memory and disk.
The third part of the output displays information related to system relevant files, i.e. Files used by Abilis during its working (e.g. Configuration and configuration backup files, System Log file, ...).
The “Other system relevant files” section displays information about any other system relevant additional files (e.g. DHCP bindings file, ...).
The “Other files:” section shows information about any other additional file that is found on the disk, in the current working version directory.
Eventual detected errors are highlighted with the string “ERR[xx]”, where “xx” is the error code detected; it should be eventually told to the Abilis CPX assistance.
This command shows the version of the software and its modules currently in use by the Abilis CPX.
[11:38:04] ABILIS_CPX:d verAbilis CPX - Ver. 8.7.0/STD - Build 4431.5 - Branch 8.7 - 06/11/2018 (c) 1994/2018 - Abilis CX : v. 2971 - 26/10/2018 CP : v. 7146.7 - 06/11/2018 COR : v. 2054 - 17/04/2018 CNFG : v. 5255.3 - 06/11/2018 COMMON : v. 4061 - 26/10/2018 LICENCE : v. 2071 - 16/07/2018 SSL : v. 2126 - 17/10/2018 CRYPT : v. 2048 - 01/06/2018 PCISRV : v. 2182 - 18/09/2018 WDG : v. 2137.1 - 31/10/2018 MFIDE3 : v. 2083.1 - 31/10/2018 MFPCI : v. 2022 - 12/10/2016 MFPCMCIA : v. 2010 - 12/10/2016 MFIO : v. 2028 - 15/07/2016 USB : v. 2219 - 23/04/2018 BLUSB : v. 2064 - 27/02/2015 SYNC-ESB : v. 2109 - 11/11/2015 SDLC : v. 2030 - 09/03/2015 SYNC-ESB2 : v. 2147 - 11/11/2015 LAPB : v. 2023 - 09/03/2015 HDLCT : v. 2029 - 21/07/2015 X25 : v. 2032 - 24/03/2016 FR : v. 2056 - 03/03/2015 MLM : v. 2159 - 19/04/2018 ML : v. 2137 - 21/11/2017 NPV : v. 2170 - 05/09/2018 ASYNC : v. 2038 - 20/05/2015 ASYNC-USB : v. 2015 - 15/06/2015 PAD : v. 2041 - 15/07/2015 ETH : v. 2571 - 17/09/2018 ETHUSB : v. 2115 - 16/01/2018 DSL : v. 2118 - 16/12/2016 ACNT : v. 2066 - 17/10/2018 IPRTR : v. 2911.1 - 02/11/2018 ICMP : v. 2131 - 16/04/2018 TCP : v. 2177 - 17/10/2018 UDP : v. 2125 - 18/04/2018 IPBAN : v. 2030 - 24/02/2015 VRRP : v. 2085 - 27/06/2018 TELNET : v. 2118 - 17/10/2018 HTTP : v. 3813.1 - 06/11/2018 SNMP : v. 2822 - 24/10/2018 RIP : v. 2097 - 19/04/2018 OSPF : v. 2179 - 19/04/2018 SNTP : v. 2066 - 17/04/2018 DNS : v. 2159 - 17/04/2018 DDNS : v. 2066 - 17/10/2018 XTP : v. 2056 - 17/10/2018 PLINKE : v. 2208 - 07/09/2018 AIPT2 : v. 2169.1 - 05/11/2018 NAT : v. 2333 - 19/04/2018 PPP : v. 2274 - 16/04/2018 SSH : v. 2209 - 17/10/2018 POECLI : v. 2142 - 17/04/2018 DHCP : v. 2170 - 29/09/2018 POEAC : v. 2162 - 17/04/2018 FTPSRV : v. 2183 - 17/10/2018 IPOE : v. 2032 - 17/04/2018 SMTP : v. 2315 - 17/10/2018 POP3 : v. 2092 - 17/10/2018 TRFA : v. 2416.1 - 05/11/2018 IPSEC : v. 2120 - 16/04/2018 IKE : v. 2214 - 17/04/2018 X509 : v. 2036 - 24/02/2015 UPNPC : v. 2096 - 17/10/2018 UPNPS : v. 2096 - 17/10/2018 IPSH : v. 2054 - 16/03/2018 LDAP : v. 2200 - 17/10/2018 LAPD : v. 2100 - 19/11/2015 Q931 : v. 2886.1 - 06/11/2018 sQ931 : v. 2004 - 02/02/2015 CTI-HW : v. 3013 - 23/04/2018 CTI-RTR : v. 4305.2 - 06/11/2018 CTI-IAX : v. 2717 - 11/12/2017 CTI-DISA : v. 2352 - 04/09/2017 CTI-SIP : v. 2990 - 24/10/2018 CTI-SMS : v. 2153 - 15/02/2018 CTI-AS : v. 2192 - 25/07/2017 CTI-VR : v. 2169 - 10/04/2018 CTI-VM : v. 2146.1 - 30/10/2018 CTI-MIX : v. 2113 - 24/10/2016 CTI-VO : v. 2451 - 02/07/2018 VMS : v. 2141 - 30/10/2017 OPC : v. 2341 - 17/10/2018 SYSLOG : v. 2031 - 16/04/2018 RJS : v. 2068 - 05/09/2017 GPS : v. 2037 - 20/04/2015 GPIO : v. 2167 - 03/02/2017 IOHUB : v. 2241 - 26/10/2018 RIO-RVS : v. 2543 - 25/10/2018 IPCONF : v. 2047 - 25/10/2018 ALARM : v. 2088 - 05/09/2018 SCRIPT : v. 2038 - 03/10/2017 UPS : v. 2028 - 26/02/2015 KNX : v. 2002 - 10/06/2016 SIM : v. 2043 - 26/06/2017 VETH : - Module not present - PROVC : v. 2008 - 17/10/2018 PROVS : v. 2002 - 22/02/2018 IPMON : v. 2015 - 14/09/2018
The first part is dedicated to the information about version and release date of the software.
In the second one, there is a list of all the Abilis CPX software modules. The string “Module not present” refers to the modules that do not belong to the Abilis CPX software currently in use.
The command d cpu estimates the average CPU load over a given time interval. It gives an estimated percentage load for the last 1 second, 15 seconds and 5 minutes.
This command also shows the CPU speed.
[11:38:04] ABILIS_CPX:d cpuNumber of CPU: 2 CPU speed : 1796 MHz +-----------------+--------------+--------------+--------------+ | | Last 1 sec | Last 15 sec | Last 5 min | +-----------------+--------------+--------------+--------------+ | Main CPU Load | 2% | 5% | 4% | +-----------------+--------------+--------------+--------------+ | Extra CPU1 Load | 0% | 0% | 0% | +-----------------+--------------+--------------+--------------+
The command d cpuid shows general information about the CPU of the Abilis CPX.
[11:38:04] ABILIS_CPX:d cpuideax in eax ebx ecx edx 00000000 0000000D 756E6547 6C65746E 49656E69 00000001 000306A9 00100800 05BAE3BF BFEBFBFF 00000002 76035A01 00F0B0FF 00000000 00CA0000 00000003 00000000 00000000 00000000 00000000 00000004 1C004121 01C0003F 0000003F 00000000 00000005 00000040 00000040 00000003 00021120 00000006 00000075 00000002 00000009 00000000 00000007 00000000 00000281 00000000 00000000 00000008 00000000 00000000 00000000 00000000 00000009 00000000 00000000 00000000 00000000 0000000A 07300803 00000000 00000000 00000603 0000000B 00000001 00000001 00000100 00000000 0000000C 00000000 00000000 00000000 00000000 0000000D 00000003 00000240 00000240 00000000 80000000 80000008 00000000 00000000 00000000 80000001 00000000 00000000 00000001 28100000 80000002 20202020 20202020 65746E49 2952286C 80000003 6C654320 6E6F7265 20295228 20555043 80000004 37333031 20402055 30382E31 007A4847 80000005 00000000 00000000 00000000 00000000 80000006 00000000 00000000 01006040 00000000 80000007 00000000 00000000 00000000 00000100 80000008 00003024 00000000 00000000 00000000 Vendor ID: "GenuineIntel"; CPUID level 13 Intel-specific functions: Version 000306A9 Type 0 - Original OEM Family 6 - Pentium Pro Model 10 - Intel Core i7 1796 MHz processor (1,795,920,558 Hz) Stepping 9 Reserved 0 Extended brand string: " Intel(R) Celeron(R) CPU 1037U @ 1.80GHz" Processor serial: missing CLFLUSH instruction cache line size: 8 Hyper threading siblings: 16 Feature flags: BFEBFBFF-05BAE3BF FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers PAE Physical Address Extension MCE Machine Check Exception CX8 COMPXCHG8B Instruction APIC On-chip Advanced Programmable Interrupt Controller present SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table PSE-36 36-bit Page Size Extension CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop HTT Hyper Threading TM Thermal monitor PBE Pending Break Enable SSE3 Streaming SIMD Extensions 3 PCLMULQDQ PCLMULQDQ DTES64 64-bit DS Area MONITOR MONITOR/MWAIT DS-CPL CPL Qualified Debug Store VMX Virtual Machine Extensions EST Enhanced Intel SpeedStep technology TM2 Thermal Monitor 2 SSSE3 Supplemental Streaming SIMD Extensions 3 CX16 CMPXCHG16B Available xTPR xTPR Update Control PDCM Perfmon and Debug Capability PCID Process-context identifiers SSE4.1 Supports SSE4.1 SSE4.2 Supports SSE4.2 x2APIC Supports x2APIC feature POPCNT Supports the POPCNT instruction TSC-DL APIC timer supports one-shot operation using a TSC deadline value XSAVE Supports the XSAVE/XRSTOR, XSETBV/XGETBV instructions, and XCR0 TLB and cache info: 5A: Data TLB: 2MB or 4MB pages, 4-way set assoc, 132 entries 03: Data TLB: 4KB pages, 4-way set assoc, 64 entries 76: unknown TLB/cache descriptor FF: unknown TLB/cache descriptor B0: Instruction TLB: 4-KB Pages, 4-way set associative, 128 entries F0: 64-byte prefetching CA: Shared 2nd-level TLB: 4-KB Pages, 4-way set associative, 512 entries TSC Invariant present
From version 8.5 the AES encryption is done by the CPU using the AES-NI and Via ACE extensions, what increases the performance respect to the software only implementation by an average of 3x.
The presence of these extensions is visible with the D CPUID command. Below are some examples of different models:
For Gigabyte N3150ND3V with Celeron N3150 (Abilis Base-D new):
[10:19:54] ABILIS_CPX:d cpuid
...
Extended brand string: " Intel(R) Celeron(R) CPU N3150 @ 1.60GHz"
...
AES Supports AESNI instruction extensionsFor Via C7/C3 (Picoabilis):
[10:26:35] ABILIS_CPX:d cpuid
...
Advanced Cryptography Engine (ACE): present
Advanced Cryptography Engine (ACE): enabledThe command d t shows date and system local time, time zone and modality of “Standard” or “Daylight Savings” time currently in use.
[11:38:04] ABILIS_CPX:d tCurrent Local Time : Friday 18/08/2017 14:25:53 (UTC+2:00) Current UTC Time : Friday 18/08/2017 12:25:53 Local Time Zone : CET - Central Europe (Rome, Paris, Berlin, Prague,... Currently Observing : Daylight Savings Time (DST) DST time will end on : Sunday 29/10/2017 at 03:00:00 DST time will start on : Sunday 25/03/2018 at 02:00:00 ------------------------------------------------------------------------------- Clock Reference : SNTP Clock Reference state : Working Clock Last Response : 18/08/2017 13:39:10 Delta: -0.227 s Clock Last Sync start : 17/08/2017 14:39:14 Delta: -0.506 s Clock Last Sync end : 17/08/2017 14:39:17
The command d te shows date and system local time, current time referred to the GMT time zone, the local time zone, modality of “Standard” or “Daylight Savings” time currently in use and information about the date it will change.
[11:38:04] ABILIS_CPX:d teCurrent Local Time : Friday 18/08/2017 14:26:21 (UTC+2:00) Current UTC Time : Friday 18/08/2017 12:26:21 Local Time Zone : CET - Central Europe (Rome, Paris, Berlin, Prague,... Currently Observing : Daylight Savings Time (DST) DST time will end on : Sunday 29/10/2017 at 03:00:00 DST time will start on : Sunday 25/03/2018 at 02:00:00 ------------------------------------------------------------------------------- Clock Reference : SNTP Clock Reference state : Working Clock Last Response : 18/08/2017 13:39:10 Delta: -0.227 s Clock Last Sync start : 17/08/2017 14:39:14 Delta: -0.506 s Clock Last Sync end : 17/08/2017 14:39:17
This command shows the description of all resources, cards and ports active in Abilis CPX.
[11:38:04] ABILIS_CPX:d descrResource SubType Description ------------------------------------------------------------------------------- Async-1 Eth-1 Eth-2 Eth-3 Dsl-1 EthUsb-1 Cp Control_Port Snmp Simple_Network_Management_Protocol Sntp Simple_Network_Time_Protocol Acnt Accounting_Service Trfa Traffic_Analyzer SysLog System_Log_protocol Opc Operator_Panel_Collector IoHub I/O_Hub_Driver Alarm Alarms_manager Lua Lua_scripting_language_support Script Lua_scripting_service X25-999 BCH Resource_for_remote_maintenance Pad-1 Xtp-1 Sim-1 CtiSLink HDLC_Over_ISDN_B-Channel CtiSys CTI_System_general_properties CtiDisa Direct_Inward_System_Access CtiSip Session_Initiation_Protocol CtiSms Short_Message_Service CtiAs CTI_Advanced_Services_entry_point CtiVm CTI_Voice_Mail_service CtiVr CTI_VR_service CtiMix CTI_Voice_Mixer_service CtiVo CTI_Virtual_Office Iprtr IP_Router_general_properties Tcp Transmission_Control_Protocol Udp User_Datagram_Protocol Telnet Telnet_Server_and_Client_entities Dns Domain_Name_System Http HyperText_Transfer_Protocol Nat Network_Address_Translator Ssh Secure_Shell_Protocol_2 Dhcp Dynamic_Host_Configuration_Protocol Ftp File_Transfer_Protocol_Server IpSec IP_Security_Protocol Ike Internet_Keys_Exchange_Protocol Smtp Simple_Mail_Transfer_Protocol Pop3 Post_Office_Protocol_Ver3 Vrrp Virtual_Router_Redundancy_Protocol DhcpC Dynamic_Host_Configuration_Protocol_Client DDns Dynamic_DNS_Protocol_Client Tftp Trivial_File_Transfer_protocol IpSh IP_Shaping_service Ldap Lightweight_Directory_Access_protocol IpMon Monitor_of_IP_addresses Fr-1 DL Fr-2 DL Pv-1 IP Pv-298 IP NPv PoeAc-1 PoeCli-1 IpoE-1 Ip-1 LAN LAN Ip-2 LAN WAN Ip-3 LAN FREE Ip-6 AIPT VPN1 Ip-7 AIPT VPN2 Ip-8 AIPT VPN_test Ip-9 AIPT To_Abilis_2 Ip-11 PPP Ip-12 VIRTUAL Ip-13 DL Ip-14 AIPT Ip-15 LAN Ip-16 LAN Ip-17 LAN-PT Ip-18 LAN Ip-19 AIPT Ip-20 DL Ip-21 AIPT Ip-22 AIPT Ip-23 AIPT-BCK Ip-24 DL Ip-25 PPP VEth Virtual_Ethernet Ssl Secure_Socket_Layer/Transport_Layer_Security Mf Abilis_Multi_Function_Interface UPnPC Universal_Plug_and_Play_Client UPnPS Universal_Plug_and_Play_Server MfIo Abilis_Multi_Function_IO_Interface MfTemp Abilis_Multi_Function_Temperature_device SysCtl Abilis_System_Control_device Vs Video_Surveillance Io Rio_devices_entry_point IpConf Rio/Rvs_devices_configuration_service ProvC Abilis_provisioning_client ProvS Abilis_provisioning_server CTI Port Description ------------------------------------------------------------------------------- 35 Interconnessione 36 Free 37 38 101 102 libero 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 501 SIM 502 cellbox 503 libera 504 libera 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532
This command displays the association between resources and its related ports.
[11:38:04] ABILIS_CPX:d pstack+------------+---------------+------------------------------------------------+ | Resource | Act/Run | Port(s) | +------------+---------------+------------------------------------------------+ | Async-1 | Act/Run | 26(Async) | | Eth-1 | Act/Run | 27(Eth) | | Eth-2 | Act/Run | 43(Eth) | | Eth-3 | Act/Run | 40(Eth) | | Eth-4 | Act/NotRun | 106(Eth) | | Dsl-1 | Act/Run | 21(Dsl) | | EthUsb-1 | Act/Run | 95(EthUsb) | | EthUsb-2 | Act/Run | 107(EthUsb) | | Cp | Act/Run | 4(Cp) | | Snmp | Act/Run | 5(Snmp) | | Sntp | Act/Run | 6(Sntp) | | Acnt | Act/Run | 7(Acnt) | | Trfa | Act/Run | 44(Trfa) | | SysLog | Act/Run | 61(SysLog) | | Opc | Act/Run | 48(Opc) | | IoHub | Act/Run | 49(IoHub) | | Alarm | Act/Run | 50(Alarm) | | Lua | Act/Run | 97(Lua) | | Script | Act/Run | 52(Script) | | X25-999 | Act/Run | 28(X25) 29(LapB) 30(Mlm) | | Pad-1 | Act/Run | 8(Pad) | | Xtp-1 | Act/Run | 63(Xtp) | | Sim-1 | Act/Run | 91(Sim) | | CtiX25D | NotAct/NotRun | 24(CtiX25D) | | CtiSLink | Act/Run | 23(CtiSLink) | | CtiVsp | NotAct/NotRun | 25(CtiVsp) | | CtiSys | Act/Run | 22(CtiSys) | | CtiIax | NotAct/NotRun | 69(CtiIax) | | CtiDisa | Act/Run | 51(CtiDisa) | | CtiSip | Act/Run | 67(CtiSip) | | CtiSms | Act/Run | 45(CtiSms) | | CtiAs | Act/Run | 46(CtiAs) | | CtiVm | Act/Run | 55(CtiVm) | | CtiVr | Act/Run | 68(CtiVr) | | CtiMix | Act/Run | 47(CtiMix) | | CtiVo | Act/Run | 54(CtiVo) | | Iprtr | Act/Run | 9(Iprtr) | | Tcp | Act/Run | 10(Tcp) | | Udp | Act/Run | 11(Udp) | | Telnet | Act/Run | 12(Telnet) | | Dns | Act/Run | 15(Dns) | | Http | Act/Run | 20(Http) | | Nat | Act/Run | 16(Nat) | | Ssh | Act/Run | 17(Ssh) | | Ospf | NotAct/NotRun | 14(Ospf) | | Dhcp | Act/Run | 18(Dhcp) | | Ftp | Act/Run | 19(Ftp) | | IpSec | Act/Run | 57(IpSec) | | Ike | Act/Run | 58(Ike) | | Smtp | Act/Run | 42(Smtp) | | Pop3 | Act/Run | 82(Pop3) | | Vrrp | Act/Run | 13(Vrrp) | | DhcpC | Act/Run | 33(DhcpC) | | DDns | Act/Run | 72(DDns) | | Tftp | Act/Run | 60(Tftp) | | IpSh | Act/Run | 71(IpSh) | | Ldap | Act/Run | 66(Ldap) | | IpMon | Act/Run | 120(IpMon) | | Fr-1 | Act/Run | 79(Fr) 80(Mlm) | | Fr-2 | Act/Run | 85(Fr) 86(Mlm) | | Pv-1 | Act/Run | 36(Mlm) 37(PLinkE) | | Pv-2 | Act/Run | 108(Mlm) 109(PLinkE) | | Pv-3 | Act/Run | 110(Mlm) 111(PLinkE) | | Pv-298 | Act/Run | 77(Mlm) 88(PLinkE) | | NPv | Act/Run | 31(NPv) | | PoeAc-1 | Act/Run | 62(PoeAc) | | PoeCli-1 | Act/Run | 87(PoeCli) | | IpoE-1 | Act/Run | 76(IpoE) | | IpoE-2 | NotAct/NotRun | 89(IpoE) | | Ip-1 | Act/Run | | | Ip-2 | Act/Run | | | Ip-3 | Act/Run | | | Ip-4 | Act/Run | | | Ip-5 | Act/Run | 117(Aipt2) | | Ip-6 | NotAct/NotRun | 38(Mlm) 39(PLinkE) | | Ip-7 | NotAct/NotRun | 32(Mlm) 41(PLinkE) | | Ip-8 | Act/Run | 64(Mlm) 65(PLinkE) | | Ip-9 | NotAct/NotRun | 90(Mlm) 92(PLinkE) | | Ip-10 | NotAct/NotRun | 34(Aipt2) | | Ip-11 | NotAct/NotRun | 56(Aipt2) | | Ip-12 | NotAct/NotRun | 70(Aipt2) | | Ip-13 | NotAct/NotRun | 75(Aipt2) | | Ip-14 | NotAct/NotRun | 78(Aipt2) | | Ip-15 | NotAct/NotRun | 93(Aipt2) | | Ip-16 | NotAct/NotRun | 94(Aipt2) | | Ip-17 | NotAct/NotRun | 114(Aipt2) | | Ip-18 | NotAct/NotRun | 115(Aipt2) | | Ip-19 | NotAct/NotRun | 118(Aipt2) | | Ip-20 | Act/Run | 119(Aipt2) | | Ip-21 | NotAct/NotRun | 98(Mlm) 99(PLinkE) | | Ip-22 | NotAct/NotRun | 100(Mlm) 101(PLinkE) | | Ip-23 | NotAct/NotRun | 102(Mlm) 103(PLinkE) | | Ip-24 | Act/Run | 104(Mlm) | | Ip-25 | Act/Run | 105(Ppp) | | Ip-79 | Act/Run | 112(Aipt2) | | Ip-80 | Act/Run | 113(Aipt2) | | Ip-81 | Act/Run | 116(Aipt2) | | Ip-100 | Act/Run | | | Ip-101 | Act/Run | | | VEth | Act/NotRun | 74(VEth) | | Ssl | Act/Run | 59(Ssl) | | Mf | Act/Run | 0(Mf) | | X509 | NotAct/NotRun | 84(X509) | | UPnPC | Act/Run | 96(UPnPC) | | UPnPS | Act/Run | 73(UPnPS) | | MfIo | Act/Run | 1(MfIo) | | MfTemp | Act/Run | 2(MfTemp) | | SysCtl | Act/Run | 3(SysCtl) | | Vs | Act/Run | 83(Vs) | | Ups | NotAct/NotRun | 53(Ups) | | Io | Act/Run | 81(Io) | | IpConf | Act/Run | 35(IpConf) | | ProvC | Act/NotRun | 121(ProvC) | | ProvS | Act/Run | 122(ProvS) | +------------+---------------+------------------------------------------------+
| Tip |
|---|---|
Interesting chapter: Section 78.30, “How to trace the internal events for debugging purposes”. |
| |  | |
| 6.7. Initialization/activation/deactivation commands |  | 6.9. Users Table |