This command creates a new list. Type the following command to create a list of ISDN numbers:

[11:35:44] ABILIS_CPX:list create Home in List_of_Home_numbers

COMMAND EXECUTED

The following command displays the syntax:

[11:35:43] ABILIS_CPX:list create ?

LIST CREATE Name Type [Description]     Create a new list

Name            List name.                                          <Mandatory>
                For 'EC' (CTI Clusters) list type, max 6 characters
                are allowed; for 'ICAUSE' (ISDN Cause codes) list type,
                max 10 characters are allowed; for any other list type,
                max 16 characters are allowed.
                Valid characters range is [0..9, A..Z, a..z, -, _].
                Space not allowed. The name cannot start with a digit.
Type            List type. Allowed list types are:                  <Mandatory>
                - IN: ISDN Numbers,            - IS: ISDN Sub Addresses,      
                - EC: CTI Clusters,            - XN: X25 NUAs,                
                - XU: X25 UDFs,                - IP: IP Addresses,            
                - IR: IP Addresses Ranges,     - DN: Dialing Numbers,         
                - CR: CPX resources,           - TUP: TCP/UDP ports ranges,   
                - IPT: Internet Protocols,     - MAC: MAC Addresses,          
                - ICMPT: ICMP message Types,   - CLNUM: CTI Clusters Numbers, 
                - INR: ISDN Numbers Replacement- IN2T: ISDN Numbers to Text,  
                - TXT: Text,                   - OPC: OPC Unique User IDs,    
                - ICAUSE: ISDN Cause codes,    - INN: ISDN Numbers Normalized,
                - RU: Rules,                   - MR: Master Rules.            
Description     List description.                                    <Optional>
                Max 70 chars. Spaces require double quotes (E.g. "str str")

This command deletes an existing list. Type the following command to delete a list:

[11:52:40] ABILIS_CPX:list delete home

YOU ARE GOING TO DELETE THE LIST:home
PROCEED (N/Y)?y

COMMAND EXECUTED 

The following command displays the syntax:

[11:50:22] ABILIS_CPX:list delete ?

LIST DELETE Name                        Delete a list

Name            Name of the list to be deleted,                     <Mandatory>

	Caution
	A list, to be deleted, must not be referred in any resource or table.

The command list rename changes the name of the list, without deleting the list.

The command list description changes or adds the field description of the list.

[12:04:13] ABILIS_CPX:list rename Home Office

COMMAND EXECUTED

[12:04:28] ABILIS_CPX:list description Office List_of_Office_numbers

COMMAND EXECUTED

By typing list rename ? or list description ? it's possible to display the command syntax:

[11:55:13] ABILIS_CPX:list rename ?

LIST RENAME Name NewName                Change/Set a list name

Name            Current list name.                                  <Mandatory>
NewName         New list name.                                      <Mandatory>
                For 'EC' (CTI Clusters) list type, max 6 characters
                are allowed; for 'ICAUSE' (ISDN Cause codes) list type,
                max 10 characters are allowed; for any other list type,
                max 16 characters are allowed.
                Valid characters range is [0..9, A..Z, a..z, -, _].
                Space not allowed. The name cannot start with a digit.

[11:59:42] ABILIS_CPX:list description ?

LIST DESCRIPTION Name Description       Change/Set a list description

Name            Name of the list whose description has to be set.   <Mandatory>
Description     List description.                                   <Mandatory>
                Max 70 chars. Spaces require double quotes (E.g. "str str").                                

This command shows the list table. The available syntax of the commands is:

This command adds items to a list.

[12:41:31] ABILIS_CPX:a list:home 0234865852 0269548947

COMMAND EXECUTED

[12:43:16] ABILIS_CPX:d list:home

- Not Saved (SAVE CONF) -------------------------------------------------------
LIST:Home                 - IN                - Ref-Numb:0     Items-Numb:2    
     List_of_Home_numbers
     --------------------------------------------------------------------------
     0234865852              0269548947

The following command displays the syntax:

[12:37:52] ABILIS_CPX:a list: ?

A LIST:Name Item1 Item2 ...             Add one or more items to a list

Name            List name or list identifier [1..250].              <Mandatory>
Item1 Item2 ... Item values separated by space                      <Mandatory>

Possible Item values for each list Type:

IN item:     String of max 20 characters in the range [0..9, ?, *, #]
             optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e,
             d, t, l, p] attributes.
             See also HELP ISDN ATTRIBUTES and HELP ISDN VALUES.
INN item:    String of max 20 characters in the range [0..9, ?, *, #]
             optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e,
             d, t, l, p] attributes.
             Omitted TON is set it to 'u', omitted NP is set to 'x'.
             The number will be normalized to 'i' (International) TON,
             therefore the resulting number length depends from
             configured International/National prefixes and Country code.
             Valid E.164 numbers are limited to a maximum of 15 digits.
             See also HELP ISDN ATTRIBUTES and HELP ISDN VALUES.
IS item:     String of max 20 characters in the range [0..9, a..z, A..Z, ?,
             *].
EC item:     String of max 8 characters in the range [0..9, a..z, A..Z, _]
             corresponding to the name of an existing CTI Cluster.
XN item:     String of max 15 characters in the range [0..9, ?, *, #].
XU item:     String of max 12 characters in the range [0..9, a..z, A..Z, ?,
             *].
IP item:     IP address in the range [000.000.000.000..255.255.255.255].
IR item:     Two IP addresses in the range [000.000.000.000..255.255.255.255]
             separated by ':' (colon).
DN item:     Sequence of four values separated by ',' (comma) e.g. 'o,n,c,r',
             where:
             - 'o' is the order [1..32]
             - 'n' is a dialing number i.e. a sequence of max 20 digits
               optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x,
               e, d, t, l, p] attributes
             - 'c' is the max number of connections [0..32]
             - 'r' is the max number of retries [0..65534, NOMAX].
             (E.g. 2,0376334412,2,5 or 1,ie444555,32,NOMAX).
             See also HELP ISDN ATTRIBUTES.
CR item:     CPX resource, 'type-n' where 'n' [1..999].
TUP item:    A single TCP or UDP port mnemonic or decimal value [1..65535]
             or two TCP or UDP ports mnemonic or decimal value [0..65535]
             separated by ':' (colon).
             See also HELP INTERNET PORTS.
IPT item:    An Internet protocol mnemonic or decimal value [0..255].
             See also HELP INTERNET PROTOCOLS.
MAC item:    A single MAC address in the form XX-XX-XX-XX-XX-XX.
ICMPT item:  An ICMP message type mnemonic or decimal value [0..255].
             See also HELP INTERNET ICMP.
CLNUM item:  Sequence of two values separated by ',' (comma) e.g. 'num,clus',
             where:
             - 'num' is the number i.e. a sequence of max 20 characters in the
               range [0..9, *] optionally preceded by TON [u, i, n, o, s, h, c]
               and/or NP [x, e, d, t, l, p] attributes
             - 'clus' is a string of max 8 characters in the range [0..9,
               a..z, A..Z, _] corresponding to the name of an existing CTI
                Cluster.
             (E.g. ne123*,my_clus)
             See also HELP ISDN ATTRIBUTES and HELP ISDN VALUES.
INR item:    Sequence of four values separated by ',' (comma) e.g.
             'num,chk,cd,cg', where:
             - 'num' is the number i.e. a sequence of max 20 characters in the
               range [0..9, ?, *, #] optionally preceded by TON [u, i, n, o, s,
               h, c] and/or NP [x, e, d, t, l, p] attributes
             - 'chk' is the field to be used by CTIR for the match [CDI, CGI,
               SDI, SGI]
             - 'cd' is the called number i.e. a sequence of max 20 characters
               in the range [0..9, *, #, 'macro']
             - 'cg' is the calling number i.e. a sequence of max 20 characters
               in the range [0..9, *, #, 'macro'].
             Both 'cd' and 'cg' can be optionally preceded by TON [u, i, n, o,
             s, h, c] and/or NP [x, e, d, t, l, p] and/or PI [a, r, m, q]
             and/or SI [y, v, w, z] attributes.
             (E.g. i55*,cgi,'CDI.S2',neq21).
             See also HELP ISDN ATTRIBUTES and HELP ISDN VALUES.
IN2T item:   Sequence of two values separated by ',' (comma) e.g. 'num,text',
             where:
             - 'num' is the number i.e. a sequence of max 20 characters in the
               range [0..9, ?, *, #] optionally preceded by TON [u, i, n, o, s,
               h, c] and/or NP [x, e, d, t, l, p] attributes
             - 'text' is a string of max 128 ASCII printable characters.
               Spaces require double quotes.
             (E.g. "i555,my free text" or ux376445566,aaaaaa@bbbbbb.com).
             See also HELP ISDN ATTRIBUTES and HELP ISDN VALUES.
TXT item:    String of max 128 ASCII printable characters.
             Spaces require double quotes (E.g. "my free text").
OPC item:    Sequence of three values separated by ',' (comma) e.g. 'a,u,i',
             where:
             - 'a' is the AbilisId i.e. max 32 characters in the range
             ['0'..'9', 'A'..'Z', 'a'..'z'] or * or (Local).
             - 'u' is a User name, i.e. max 32 ASCII characters or *
             - 'i' is an Interface type [* or ANY, CTIP, CLUS, SIP, IAX]
             (E.g. myAbilis,myUser,CTIP).
ICAUSE item: Sequence of three values separated by ',' (comma) e.g. 'l,r,s',
             where:
             - 'l' is the ISDN location code, i.e. an hexadecimal value in the
               range [00..FF] or ISDN location mnemonic in the range [U, LPN,
               LN, TN, RN, RPN, INTL, BI] or "INT" or "EXT" or "ANY"
             - 'r' is the ISDN reason code or a range of ISDN reason codes,
               i.e. one hexadecimal value or two hexadecimal  values separated
               by ':' (colon) in the range [00..FF]
             - 's' is the connection state/phase, i.e. [CREQ, ALERT, ANY].
               The connection state/phase is optional and by default it is set
               to "CREQ".
             (E.g. EXT,91,ANY or 80,90:91,CREQ).
RU item:     Expression with Lists names and operators (AND, OR, NOT, NORM),
             separated by '.' (dot), where:
             - AND  is the logical AND operator;
             - OR   is the logical OR operator;
             - NOT  is the logical NOT operator;
             - NORM is an operator that enables the execution of multiple
               searches for equivalent number(s), by changing the number TON
               attribute to 'u' (unknown), to 'n' (national) and by last to 'i'
               (international).
               This operator is used only on ISDN numbers (IN).
             The lists contained in the expression should not be themselves of
             RU type.
             The expression can be preceded by a macro, that will be applied
             to the number before executing the search in the list. The macro
             must be written between single quote and separated by '.' (dot)
             from the expression. The macro is used only on ISDN numbers (IN).
             (E.g. List1.AND.List2 or NORM.List or 'u0'NUM.S3''.MyList).
MR item:     Expression with Lists names and operators (AND, OR, NOT, NORM),
             separated by '.' (dot), where:
             - AND  is the logical AND operator;
             - OR   is the logical OR operator;
             - NOT  is the logical NOT operator;
             - NORM is an operator that enables the execution of multiple
               searches for equivalent number(s), by changing the number TON
               attribute to 'u' (unknown), to 'n' (national) and by last to 'i'
               (international).
               This operator is used only on ISDN numbers (IN).
             The lists contained in the expression should not be themselves of
             MR type.
             The expression can be preceded by a macro, that will be applied
             to the number before executing the search in the list. The macro
             must be written between single quote and separated by '.' (dot)
             from the expression. The macro is used only on ISDN numbers (IN).
             (E.g. List1.AND.List2 or NORM.List or 'u0'NUM.S3''.MyList).

The command c list deletes items from a list.

[12:43:19] ABILIS_CPX:c list:home 0234865852

COMMAND EXECUTED

[12:53:25] ABILIS_CPX:d list:home

LIST:Home                 - IN                - Ref-Numb:0     Items-Numb:1    
     List_of_Home_numbers
     --------------------------------------------------------------------------
     0269548947  

The following command displays the syntax:

[12:43:19] ABILIS_CPX:c list: ?

C LIST:Name Item                        Remove an item from a list

Name            List name or list identifier [1..250].              <Mandatory>
Item            Item value            <Mandatory, Optional only for RU/MR list>

C LIST:Name Order                       Remove an item from a DN list

Name            List name or list identifier [1..250].              <Mandatory>
Order           Order value of the DN item                          <Mandatory>

This command shows the elements table. Lists table can store up to 4000 definitions (indexed from 1 to 4000).

Element identifiers are sequential and they run only into the system, so they can't be used by the user in no one of the list manipulation commands.

If the elements table is empty, the message “NO ITEMS DEFINED” is generated.

[12:43:19] ABILIS_CPX:d item

Last change: 21/08/2017 08:43:26

Used-Lists:  5     Used-Items:    5     Used-Resources:    397 (byte)
Free-Lists:245     Free-Items: 3995     Free-Resources: 644723 (byte)

Item  List Type   Value
-------------------------------------------------------------------------------
   1    2     IN 601
   2    3     IN 08351825431
   3    3     IN 200
   4    3     IN 901
   5    4     IN 0234865852
   6    4     IN 0269548947
-------------------------------------------------------------------------------
IN:ISDN Numbers,               XN:X25 NUAs,                CR:CPX resources,
INN:ISDN Numbers Normalized,   XU:X25 UDFs,                EC:CTI Clusters,
IS:ISDN Sub Addresses,         IP:IP Addresses,            MAC:MAC Addresses,
INR:ISDN Numbers Replacements, IR:IP Addresses Ranges,     DN:Dialing Numbers,
IN2T:ISDN Numbers to Text,     IPT:Internet Protocols,     TXT:Text,
CLNUM:CTI Clusters Numbers,    TUP:TCP/UDP ports ranges,
ICAUSE:ISDN Cause codes,       ICMPT:ICMP message Types,   RU:Rules,
OPC:OPC Unique User IDs,                                   MR:Master Rules.
-------------------------------------------------------------------------------