DHCP is designed to use the BOOTP protocol specifications so that DHCP messages are passed between DHCP clients and DHCP servers.

For example, to allow the relay of DHCP packets to the server 192.168.0.250, type the command:

[17:40:46] ABILIS_CPX:s dhcp lan:1 mode:relay server:192.168.0.250

COMMAND EXECUTED 

[17:42:37] ABILIS_CPX:d dhcp lan:1                                 

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------
Parameter:   | Value:
-------------+-----------------------------------------------------------------
LAN:           1
NAME:          
NET:           192.168.029.000/24
MASK:          255.255.255.000
MAC-FILTER:    #
MODE:          RELAY
SERVER:        192.168.000.250
MAX-HOPS:      4
LOCIPADD:      OUT-IP
------------------------------------------------------------------------------

	Tip
	Interesting chapter: Section 80.24.1, “How to activate the DHCP in relay mode”.