The example shows how:
to configure the FTP resource;
to activate the user “ftpuser”;
to create a virtual path;
to give access rights to “ftpuser”.
Activating the resource suffices without configuring all listed parameters.
[16:45:57] ABILIS_CPX:s p ftp act:yes
COMMAND EXECUTED [16:47:43] ABILIS_CPX:d p ftp
RES:Ftp - Not Saved (SAVE CONF), Not Refreshed (INIT) ------------------------- ------------------------------------------------------------------------ DESCR:File_Transfer_Protocol_Server LOG:NO ACT:YES max-cli:4 max-ssl-sess:0 tcp-locport-c:21 tcp-locport-d:20 TOS:0-N IPSRC:* IPSRCLIST:# DATA-TOUT:30 DT:300 REJ-1024:YES SAME-IP:YES SYSDRIVES:NO MAX-PWD-FAIL:4 DELAY-PWD-FAIL:5 MAX-IP-SES:NOMAX MAX-USER-SES:2 ANONYMOUS-USER:DENY REGISTERED-USER:PERMIT ANONYMOUS-HOMEDIR:
Add the user “ftpuser” in the Users table:
[16:02:24] ABILIS_CPX:a user:ftpuser pwd:ftpuser ftp:yes
COMMAND EXECUTED [16:05:08] ABILIS_CPX:s user:ftpuser ftp-homedir:/test1/
COMMAND EXECUTED [17:29:55] ABILIS_CPX:d user
- Not Saved (SAVE CONF) ------------------------------------------------------- ------------------------+-------------+---------------------------------------- USER PWD ACT|CTIP CLUS |CHAT LDAP PPP FTP HTTP MAIL IAX SIP VO ------------------------+-------------+---------------------------------------- admin *** YES # # YES YES YES YES YES NO NO NO NO ftpuser *** YES # # NO NO NO YES NO NO NO NO NO guest NO # # NO NO NO NO NO NO NO NO NO [22:32:04] ABILIS_CPX:d user:ftpuser
Parameter: | Value: --------------------+---------------------------------------------------------- USER: ftpuser REAL-NAME: ftpuser ID: 7 <Read Only> PWD: *** ACT: YES GROUP: CTIP: # CLUS: # ADDRBOOK-SYNC: SYS ADDRBOOK-NUMBER: AUTO ADDRBOOK-OUTDIAL: NONE ADDRBOOK-PUB-ENABLED: SYS OPC-ROLE: USER OPC-VIEW: * OPC-HIDE-NUMBERS: NO OPC-MONITOR: NONE OPC-PRIVACY: NO CHAT: NO CHAT-USER: SYS CHAT-PWD: SYS FTP: YES FTP-HOMEDIR: /test1/ FTP-PROT: PLAIN,SSL -------------------------------------------------------------------------------
Create the association between virtual path
/test1/
and physical path
c:\usr\pub\test1\
(that corresponds to ftpuser's
FTP-HOMEDIR
).
[16:11:57] ABILIS_CPX:a ftp path:/test1/ phys-path:c:\usr\pub\test1\
COMMAND EXECUTED [22:32:36] ABILIS_CPX:d ftp path
- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- Parameter: | Value: ------------+------------------------------------------------------------------ PATH: /pub/ PHYS-PATH: C:\USR\PUB\ ------------------------------------------------------------------------------- PATH: /pub2/ PHYS-PATH: D:\USR\PUB\ ------------------------------------------------------------------------------- PATH: /test1/ PHYS-PATH: c:\usr\pub\test1\ ------------------------------------------------------------------------------- PATH: /usr/ PHYS-PATH: C:\USR\ ------------------------------------------------------------------------------- PATH: /usr2/ PHYS-PATH: D:\USR\ -------------------------------------------------------------------------------
Note | |
---|---|
Supposing: |
Caution | |
---|---|
Execute the initialization command init res:ftp to activate changes. |
Give access rights to user “ftpuser” on directory
c:\usr\pub\test1\
.
[16:21:35] ABILIS_CPX:a ftp rights path:/test1/ user:ftpuser file:rwdn dir:lcdn recur:yes prot:plain,ssl
COMMAND EXECUTED [22:33:27] ABILIS_CPX:d ftp rights
- Not Saved (SAVE CONF) ------------------------------------------------------- ------------------------------------------------------------------------------- ID: PATH: USER: FILE: DIR: RECUR: PROT: ------------------------------------------------------------------------------- 1 /pub/ admin rwdn lcdn YES PLAIN,SSL anonymous r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- 2 /pub2/ admin rwdn lcdn YES PLAIN,SSL anonymous r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- 3 /sysdrives/ admin rwdn lcdn YES PLAIN,SSL ------------------------------------------------------------------------------- 6 /test1/ ftpuser rwdn lcdn YES PLAIN,SSL ------------------------------------------------------------------------------- 4 /usr/ admin rwdn lcdn YES PLAIN,SSL ------------------------------------------------------------------------------- 5 /usr2/ admin rwdn lcdn YES PLAIN,SSL -------------------------------------------------------------------------------
Give to ftpuser
read-only rights on directory
usr
and its subdirectories (virtual path
/usr/
).
[16:29:04] ABILIS_CPX:a ftp rights path:/usr/ user:ftpuser file:rwd-n dir:l-c-d-n recur:yes prot:plain,ssl
COMMAND EXECUTED [22:34:17] ABILIS_CPX:d ftp rights
- Not Saved (SAVE CONF) ------------------------------------------------------- ------------------------------------------------------------------------------- ID: PATH: USER: FILE: DIR: RECUR: PROT: ------------------------------------------------------------------------------- 1 /pub/ admin rwdn lcdn YES PLAIN,SSL anonymous r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- 2 /pub2/ admin rwdn lcdn YES PLAIN,SSL anonymous r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- 3 /sysdrives/ admin rwdn lcdn YES PLAIN,SSL ------------------------------------------------------------------------------- 6 /test1/ ftpuser rwdn lcdn YES PLAIN,SSL ------------------------------------------------------------------------------- 4 /usr/ admin rwdn lcdn YES PLAIN,SSL ftpuser r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- 5 /usr2/ admin rwdn lcdn YES PLAIN,SSL -------------------------------------------------------------------------------
An FTP client can be used to connect to Abilis FTP server.
The logged-in user accesses the directory
/test1/
(c:\usr\pub\test1\
) using
the configured rights (create/rename/delete new directories or files).
Outside directories can only be viewed.
Settting the SYSDRIVES
parameter to
YES
is needed to access to the system version
directories, e.g. C:\8-5-1\
(/sysdrives/C/8-5-1/
).
[16:45:57] ABILIS_CPX:s p ftp sysdrives:yes
COMMAND EXECUTED [16:47:43] ABILIS_CPX:d p ftp
RES:Ftp - Not Saved (SAVE CONF), Not Refreshed (INIT) ------------------------- ------------------------------------------------------------------------ DESCR:File_Transfer_Protocol_Server LOG:NO ACT:YES max-cli:4 max-ssl-sess:0 tcp-locport-c:21 tcp-locport-d:20 TOS:0-N IPSRC:* IPSRCLIST:# DATA-TOUT:30 DT:300 REJ-1024:YES SAME-IP:YES SYSDRIVES:YES MAX-PWD-FAIL:4 DELAY-PWD-FAIL:5 MAX-IP-SES:NOMAX MAX-USER-SES:2 ANONYMOUS-USER:DENY REGISTERED-USER:PERMIT ANONYMOUS-HOMEDIR:
The access is enabled by default for the user “admin”; access rights to user “ftpuser” can be given with the following command:
[15:19:20] ABILIS_CPX:a ftp rights path:/sysdrives/ user:ftpuser file:rwdn dir:lcdn recur:yes prot:plain,ssl
COMMAND EXECUTED [15:20:01] ABILIS_CPX:d ftp rights
- Not Saved (SAVE CONF) ------------------------------------------------------- ------------------------------------------------------------------------------- 1 /pub/ admin rwdn lcdn YES PLAIN,SSL anonymous r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- 2 /pub2/ admin rwdn lcdn YES PLAIN,SSL anonymous r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- 3 /sysdrives/ admin rwdn lcdn YES PLAIN,SSL ftpuser rwdn lcdn YES PLAIN,SSL ------------------------------------------------------------------------------- 6 /test1/ ftpuser rwdn lcdn YES PLAIN,SSL ------------------------------------------------------------------------------- 4 /usr/ admin rwdn lcdn YES PLAIN,SSL ftpuser r--- l--- YES PLAIN,SSL ------------------------------------------------------------------------------- 5 /usr2/ admin rwdn lcdn YES PLAIN,SSL -------------------------------------------------------------------------------