The example below shows how to configure the SNMP resource and to enable the SNMP Agent to the remote IP address 81.81.81.81 and to send TRAPS to the host 192.168.1.201.

[18:06:44] ABILIS_CPX:s p snmp act:yes ipsrc:81.81.81.81 trap:yes trapdest:192.168.1.201 traprep:60

COMMAND EXECUTED

[18:06:50] ABILIS_CPX:d p snmp

RES:Snmp - Not Saved (SAVE CONF), Not Refreshed (INIT) ----------------------
       -----------------------------------------------------------------------
Run    DESCR:Simple_Network_Management_Protocol
       LOG:NO        ACT:YES
       - Agent ----------------------------------------------------------------
       locport:161
       COMMUNITY:public
       IPSRC:081.081.081.081          IPSRCLIST:#
       - Traps ----------------------------------------------------------------
       TRAP:YES      AUTHTRAP:NO      TRAPREP:60
       TRAPDEST:192.168.001.201       TRAPSRC:R-ID (192.168.001.001)

This configuration allows Abilis to accept the SNMP request from host 81.81.81.81 and to send any traps to the host 192.168.1.201 every 60 minutes.

	Tip
	Interesting chapter: Section 80.28, “How to activate the SNMP agent”.