81.1. How to configure ISDN ports to connect PBX or ISDN lines

81.1. How to configure ISDN ports to connect PBX or ISDN lines
	Chapter 81. HowTo - CTI system

Physical connections:

Verify that an ISDN card (PB44X, BRI-HFC4, BRI-HFC8) is installed in the Abilis. If the card isn't present, insert it in a free PCI slot.
Connect the ISDN card to NT devices and to PBX.

The basic parameters that must be configured are:

side:NT (if the CTI Port is connected to PBX) or TE (if the CTI Port is connected to ISDN lines).
line:PP (if the ISDN line is Point-to-Point) or MP (if the ISDN line is Point-to-Multipoint).

Let's see how to configure a BRI card: in the standard configuration, the CTI Ports 31 and 32 are configured towards the PBX, while the CTI Ports 33 and 34 towards ISDN lines.

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

a dev:bri4-1	Add an ISDN device (e.g. BRI4-1).
s ctip:31 side:nt line:pp descr:to_PBX	Configure the port behaviour, the line type (`PP` or `MP`) and the description of the CTI Port.
s ctip:32 side:nt line:pp descr:to_PBX	Configure the port behaviour, the line type (`PP` or `MP`) and the description of the CTI Port.
s ctip:33 side:te line:pp descr:to_ISDN_line_(PP)	Configure the port behaviour, the line type (`PP` or `MP`) and the description of the CTI Port.
s ctip:34 side:te line:pp descr:to_ISDN_line_(PP)	Configure the port behaviour, the line type (`PP` or `MP`) and the description of the CTI Port.
save conf	Save the configuration.

On a working Abilis, a system restart is required to make the BRI4-1 device and the CTI Ports running.

Tip

	Tip
To know if the ISDN line is `PP` or `MP`, display the statistics of the CTI Ports and verify the `DISC` parameter. If the value is different from zero, the line is `MP`. [10:00:21] ABILIS_CPX:`d s ctip:33` CTIP:33 ---------------------------------------------------------------------- to_ISDN_line_(MP) --- Cleared 2 days 19:22:44 ago, on 05/06/2015 at 20:34:31 ------------- Layer 3 Q.931 -----------\|---INPUT---\|--OUTPUT---\|-----------\|---INPUT---\|--OUTPUT---\| FAIL-CALL \| 0\| 171\|SUCC-CALL \| 10\| 3\| TIME-CALL \| 604753\| 1149\| ------------------------------------------------------------------------ Layer 2 Sapi 16 (X.25) TEI:10 -----------\|---INPUT---\|--OUTPUT---\|-----------\|---INPUT---\|--OUTPUT---\| T200-DN \| \| 0\|T200-UP \| \| 0\| REP \| 0\| 0\|INFO \| 0\| 0\| UI \| 0\| 0\|RR \| 0\| 0\| RNR \| 0\| 0\|REJ \| 0\| 0\| FRMR \| 0\| 0\|SABME \| 0\| 0\| UA \| 0\| 0\|DISC \| 0\| 0\| DM \| 0\| 0\|N200-OVER \| \| 0\| SHORT \| 0\| \|LONG \| 0\| \| UNK-SAPI \| 0\| \|BAD-FRM \| 0\| \| ------------------------------------------------------------------------ Layer 2 Sapi 0 (Q.931) TEI:ALL -----------\|---INPUT---\|--OUTPUT---\|-----------\|---INPUT---\|--OUTPUT---\| T200-DN \| \| 38\|T200-UP \| \| 38\| REP \| 0\| 0\|INFO \| 544\| 435\| UI \| 60\| 0\|RR \| 706\| 986\| RNR \| 0\| 0\|REJ \| 0\| 0\| FRMR \| 0\| 0\|SABME \| 7\| 222\| UA \| 191\| 189\|DISC \| 182\| 3\| DM \| 3\| 0\|N200-OVER \| \| 9\| SHORT \| 0\| \|LONG \| 0\| \| UNK-SAPI \| 0\| \|BAD-FRM \| 0\| \| ------------------------------------------------------------------------ Layer 1 B-Channels (HDLC) -----------\|---INPUT---\|--OUTPUT---\|-----------\|---INPUT---\|--OUTPUT---\| CHR \| 9108202\| 3330716\|FRM \| 113593\| 108517\| CHR-D \| 7418673\| 1657684\|FRM-D \| 19114\| 14961\| CHR-V \| 1685249\| 1668689\|FRM-V \| 93765\| 92831\| CHR-C \| 4280\| 4343\|FRM-C \| 714\| 725\| ERRORS \| 873\| 0\| ------------------------------------------------------------------------ Layer 1 D-Channel -----------\|---INPUT---\|--OUTPUT---\|-----------\|---INPUT---\|--OUTPUT---\| CHR \| 19561\| 14378\|FRM \| 2208\| 1848\| CHR-D \| 19561\| 14378\|FRM-D \| 2208\| 1848\| ERRORS \| 354\| 0\| ------------------------------------------------------------------------ Layer 1 alarms -----------\|---INPUT---\|--OUTPUT---\|-----------\|---INPUT---\|--OUTPUT---\| SLIPS \| 79\| N/A\|LINE-DOWN \| 449\| \| ------------------------------------------------------------------------

To know if the ISDN line is PP or MP, display the statistics of the CTI Ports and verify the DISC parameter. If the value is different from zero, the line is MP.

[10:00:21] ABILIS_CPX:d s ctip:33

CTIP:33  ----------------------------------------------------------------------
       to_ISDN_line_(MP)
       --- Cleared 2 days 19:22:44 ago, on 05/06/2015 at 20:34:31 -------------
       Layer 3 Q.931
       -----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
       FAIL-CALL  |          0|        171|SUCC-CALL  |         10|          3|
       TIME-CALL  |     604753|       1149|
       ------------------------------------------------------------------------
       Layer 2 Sapi 16 (X.25)  TEI:10
       -----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
       T200-DN    |           |          0|T200-UP    |           |          0|
       REP        |          0|          0|INFO       |          0|          0|
       UI         |          0|          0|RR         |          0|          0|
       RNR        |          0|          0|REJ        |          0|          0|
       FRMR       |          0|          0|SABME      |          0|          0|
       UA         |          0|          0|DISC       |          0|          0|
       DM         |          0|          0|N200-OVER  |           |          0|
       SHORT      |          0|           |LONG       |          0|           |
       UNK-SAPI   |          0|           |BAD-FRM    |          0|           |
       ------------------------------------------------------------------------
       Layer 2 Sapi 0  (Q.931) TEI:ALL
       -----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
       T200-DN    |           |         38|T200-UP    |           |         38|
       REP        |          0|          0|INFO       |        544|        435|
       UI         |         60|          0|RR         |        706|        986|
       RNR        |          0|          0|REJ        |          0|          0|
       FRMR       |          0|          0|SABME      |          7|        222|
       UA         |        191|        189|DISC       |        182|          3|
       DM         |          3|          0|N200-OVER  |           |          9|
       SHORT      |          0|           |LONG       |          0|           |
       UNK-SAPI   |          0|           |BAD-FRM    |          0|           |
       ------------------------------------------------------------------------
       Layer 1 B-Channels (HDLC)
       -----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
       CHR        |    9108202|    3330716|FRM        |     113593|     108517|
       CHR-D      |    7418673|    1657684|FRM-D      |      19114|      14961|
       CHR-V      |    1685249|    1668689|FRM-V      |      93765|      92831|
       CHR-C      |       4280|       4343|FRM-C      |        714|        725|
       ERRORS     |        873|          0|
       ------------------------------------------------------------------------
       Layer 1 D-Channel
       -----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
       CHR        |      19561|      14378|FRM        |       2208|       1848|
       CHR-D      |      19561|      14378|FRM-D      |       2208|       1848|
       ERRORS     |        354|          0|
       ------------------------------------------------------------------------
       Layer 1 alarms
       -----------|---INPUT---|--OUTPUT---|-----------|---INPUT---|--OUTPUT---|
       SLIPS      |         79|        N/A|LINE-DOWN  |        449|           |
       ------------------------------------------------------------------------


Chapter 81. HowTo - CTI system		81.2. How to configure FXS (POTS) ports for analog telephones or FAX machines