CTI POTS ports (CTI Ports from 101 to 196) allow the connection
between Abilis and analogue phone devices. Each one is identified with a
two digits number (NUM
parameter); the
NUM
value can be set by the user and must be unique
(default values start from 01,02…).
[15:40:09] ABILIS_CPX:d p ctip:101
CTIP:101 DESCR: Act card:POTS-1<1> USER:# Run OPSTATE:UP LOG:NO TYPE:USER signalling:POTS HOLD:YES CT:ICT SS:YES DEVICE:PHONE AC:NO NUM:01 ADDRBOOK-NUM:NUM [15:40:25] ABILIS_CPX:d p ctipe:101
CTIP:101 DESCR: Act card:POTS-1<1> USER:# Run OPSTATE:UP LOG:NO TYPE:USER signalling:POTS HOLD:YES CT:ICT SS:YES DEVICE:PHONE AC:NO NUM:01 ADDRBOOK-NUM:NUM AC-CDO:876543 AC-DLY:60 LOOP:NO TEST:NO CLIP:SYS CLIP-STD:SYS CLIP-TAS:SYS CLIP-LEVEL:SYS SENSING:SYS ABF:SYS HPF:SYS DEBOUNCE:SYS MIN-FLASH:SYS COUNTRY:SYS MAX-FLASH:SYS DIALT:5 IN-GAIN-ADJ:SYS OUT-GAIN-ADJ:SYS AT:SYS AT-CODE:SYS AT-DURATION:SYS BC:SYS DT:SYS DT-CODE:SYS DT-DURATION:SYS OUT-DIAL-TONE:SYS SS-PICKUP:GROUPS SS-PRES-CG:YES NPOO-CT:NO SS-CF-DND:YES SS-VM:YES
Routings can be added using the POTS ports number (101-196) in
POI
or POO
parameters.
The special value
can be used:
CTI Router verifies the last two digits of the Called Input number and
compares them with the field PBX
NUM
of the CTI POTS ports.
The call is routed to the correspondent port that matches.
Example: route the calls arriving from cluster
Abilis2
to the analogue devices connected to the POTS,
by verifying the last two digits of the called number (i.e.
02345678xx).
[15:40:31] ABILIS_CPX:a ctir pr:2 type:ctov sr:Abilis2 poo:pbx cdi:02345678??
COMMAND EXECUTED [15:41:32] ABILIS_CPX:d ctir pr:2
- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- Last change: 24/04/2015 15:41:32 CET ---+-----+-----------------+---------+--------------------+-------------------- PR |[DESCR] |TYPE |POI/SR [SR] |POO/DS |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT|SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |RGI |RGO |FMRLY|FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 ------------------------------------------------------------------------------- 2 CtoV Abilis2 PBX 02345678?? * -------------------------------------------------------------------------------
With this rule the calls to 0234567821 is routed to the ports with
NUM:21
.
By configuring the routing specifying the number of the CTI POTS ports, each call will be routed on the corresponding port without verifying the called number.
[14:45:35] ABILIS_CPX:a ctir pr:2 type:ctov sr:Abilis2 poo:101 cdi:*
COMMAND EXECUTED [14:51:16] ABILIS_CPX:d ctir pr:2
- Not Saved (SAVE CONF), Not Refreshed (INIT) --------------------------------- ---+-----+-----------------+---------+--------------------+-------------------- PR |[DESCR] |TYPE |POI/SR [SR] |POO/DS |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT|SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |RGI |RGO |FMRLY|FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 ------------------------------------------------------------------------------- 2 CtoV Abilis2 101 * * -------------------------------------------------------------------------------
The routing above routes every call which comes from the cluster
Abilis2
to
CTIP
:101
.