| 49.3. CTI Routings | ||
|---|---|---|
 | Chapter 49. SIP - Session Initiation Protocol |  |
| 49.3. CTI Routings | ||
|---|---|---|
| | Chapter 49. SIP - Session Initiation Protocol | |
Appropiate routings must be added in the CTI Router, in order to route the calls to and from the CTISIP resource.
The destination or the source of the SIP group appears as
CtiSip (this is the default value).
To view all the configurable parameters type:
[13:47:29] ABILIS_CPX:d ctir ---+-----+-----------------+---------+--------------------+-------------------- PR |[DESCR] |TYPE |POI/SR [SR] |POO/DS |CDI |CDO ACT|NEXT |LAST |EEC |T301|CGI |CGO EDT|SP |SC |DJ |MJ |FMDJ|FMMJ|SDI |SDO |SPOUT|SCOUT|DJOUT|MJOUT|LCS |LCST|SGI |SGO | |RGI |RGO |FMRLY|FAXSP|MODSP|FMLVL|ECM |UDT |IG |OG |SG |DL |DH |CODERS |CODERSOUT |TI1 .. TI5 -------------------------------------------------------------------------------
The routing types involved with CtiSip are:
Table 49.2. CtiSip routing
| Type | Description | Transcoding supported |
|---|---|---|
| VtoS | Voice to SIP | NO |
| CtoS | Cluster to SIP | YES |
| DtoS | DISA to SIP | YES |
| ItoS | IAX to SIP | YES |
| StoV | SIP to Voice | NO |
| StoC | SIP to Cluster | YES |
| StoD | SIP to DISA | YES |
| StoI | SIP to IAX | YES |
| StoS | SIP to SIP | YES |
![[Tip]](../images/tip.png) | Tip |
|---|---|
Transcoding is allowed when parameter The transcoding is possible only for the coders supported by Abilis. To view them, type: [14:09:52] ABILIS_CPX:d d ctisys
RES:CtiSys --------------------------------------------------------------------
CTI_System_general_properties
CTIR-STATE:ENABLED CALLS-CURRENT:0 CALLS-PEAK:1
AC-STATE:ENABLED AC-CURRENT:0 AC-PEAK:1
------------------------------------------------------------------------
-- Number of simultaneous calls ----------------------------------------
| State: Alerting/Connected | State: Any |
---------------|---Current---|----Peak-----|---Current---|----Peak-----|
TR | 0 | 0 | 0 | 0 |
DATA | 0 | 0 | 0 | 0 |
VtoCISDA | 0 | 1 | 0 | 1 |
CISDAtoCISDA | 0 | 1 | 0 | 1 |
CISDAtoV | 0 | 0 | 0 | 0 |
ALL | 0 | 1 | 0 | 1 |
------------------------------------------------------------------------
- AC and SWAC common available coders ----------------------------------
-- Coder ---|-- Bit rates (kbps) --|-- Coder ---|-- Bit rates (kbps) --|
G.711A |64 |G.711u |64 |
G.723.1 |5.3, 6.3 |G.726 |16, 24, 32, 40 |
G.729A |8 |TRANSPARENT |64 |
Spirit |6.4, 7.2, 8, 8.8, 9.6 |G.727 |16/16, 24/16, 24/24, |
| | |32/16, 32/24, 32/32, |
| | |40/16, 40/24, 40/32 |
------------------------------------------------------------------------
- SWAC and MCD limits by CPU -------------------------------------------
MAX-SWAC-0ms:5 MAX-SWAC-8ms:4 MAX-SWAC-16ms:4 MAX-SWAC-32ms:4
MAX-MCD-SPIRIT:5 MAX-MCD-G729A:6
- SWAC and MCD diagnostics ---------------------------------------------
CUR-SWAC:0 PEAK-SWAC:0 REST-SWAC:0 MAX-SWAC:0 LIMIT-SWAC:CFG
CUR-MCD:0 PEAK-MCD:0 MAX-HDLC:8
------------------------------------------------------------------------
- Clock Sources for H100 cards -----------------------------------------
CLK:INT
- Clock Sources for NOT-H100 cards -------------------------------------
--- CARD ---|- CLK -|
BSE-1 | INT |
------------------------------------------------------------------------ |
| Tip |
|---|---|
For further information about transcoding refer to Section 48.3, “CTI Routings”. |
| |  | |
| 49.2. CTISIP tables |  | 49.4. Example of configuration |