Add the resource to the Abilis system with the following command.
[11:09:16] ABILIS_CPX:
a res:upnps
RES:UPNP ALREADY EXISTS
The UPNPS resource may already exist in the system, but may not yet be active: set it active with the command:
[11:09:21] ABILIS_CPX:
s act res:upnps
COMMAND EXECUTED
On a working Abilis, a system restart is needed to make the resource running.
Use the below command to display the parameters of the resource:
[14:53:51] ABILIS_CPX:
d p upnps
RES:UPnPS -------------------------------------------------------------------- Run Run DESCR:Universal_Plug_and_Play_Server LOG:NO ACT:NO sesnum:5 udp-locport:1900 tcp-locport:1900 MAX-AGE:1800 TOS:0-N IPSRC:* IPSRCLIST:# WDIR:C:\APP\UPNP\ [14:58:56] ABILIS_CPX:_s p upnps act:yes
COMMAND EXECUTED [14:59:00] ABILIS_CPX:_init res:upnps
COMMAND EXECUTED [14:59:18] ABILIS_CPX:_d p upnps
RES:UPnPS --------------------------------------------------------------------- Run DESCR:Universal_Plug_and_Play_Server LOG:NO ACT:YES sesnum:5 udp-locport:1900 tcp-locport:1900 MAX-AGE:1800 TOS:0-N IPSRC:* IPSRCLIST:# WDIR:C:\APP\UPNP\
Below are descriptions of the most important parameters:
activates the logging and the generation of the alarms
[NO
, D
(=Debug Log),
S
(=System Log), A
(=Alarm
view), L
(=Local audible alarm),
T
(=SNMP traps), ALL
]
[+E
(=Extended Log of state changes)].
ACT
enables/disables the resource [NO
,
YES
].
sesnum
Number of sessions that the UPNP server module can support.
udp-locport
Local UDP port of UPNP server. Default value = 1900.
tcp-locport
Local TCP port of UPNP server. Default value = 1900.
MAX-AGE
Number of seconds the server' advertisement is valid.
IPSRCLIST
Incoming requests: name of the IP/IR/RU/MR list for source IP address acceptance.
IPRSC
Incoming requests: accepted source IP address.
The following command allows the administrator to change the configuration of the resource:
s p upnps
name
:value
...