| 43.2. TRFA diagnostics, statistics and debug | ||
|---|---|---|
 | Chapter 43. TRFA - Traffic Analyzer |  |
| 43.2. TRFA diagnostics, statistics and debug | ||
|---|---|---|
| | Chapter 43. TRFA - Traffic Analyzer | |
The following commands are used to display the diagnostics of the TRFA resource:
Shows the current status of the resource, the current status of the active address array, the current status of the active traffic array, the number of seconds to reach next event, the percentage of use of the active address/backup array, the currently record saved in the active address/backup array, the maximum number of simultaneously record in the active address/backup array, the actual size of the active address/backup array and the number of requests that were discarded because active address/backup array is overflow.
[15:53:04] ABILIS_CPX:d d trfa
RES:Trfa ----------------------------------------------------------------------
Traffic_Analyzer
STATE:ACTIVE ACTIVE-STATE:NORMAL BACKUP-STATE:NORMAL EVENT:197
---ARRAY---|---PERC----|----CUR----|---PEAK----|----MAX----|----OVR----|
ACTIVE | 0| 2| 3| 1000| 0|
BACKUP | 0| 2| 3| 1000| 0|
------------------------------------------------------------------------
- Real-Time service ----------------------------------------------------
CLIENTS-CUR:0 CLIENTS-MAX:20 CLIENTS-PEAK:1
- TRFA Sessions --------------------------------------------------------
Ses State SessionID UsedMem PendingTime WaitingTime
ClientIP Request Side TimeWindow SampleInterval
------------------------------------------------------------------------
0 READY 0 0 0
-------------------------------------------------------------------
1 READY 0 0 0
-------------------------------------------------------------------
2 READY 0 0 0
-------------------------------------------------------------------
3 READY 0 0 0
-------------------------------------------------------------------
4 READY 0 0 0
-------------------------------------------------------------------
5 READY 0 0 0
-------------------------------------------------------------------
6 READY 0 0 0
-------------------------------------------------------------------
7 READY 0 0 0
-------------------------------------------------------------------
8 READY 0 0 0
-------------------------------------------------------------------
9 READY 0 0 0
-------------------------------------------------------------------
10 READY 0 0 0
-------------------------------------------------------------------
11 READY 0 0 0
-------------------------------------------------------------------
12 READY 0 0 0
-------------------------------------------------------------------
13 READY 0 0 0
-------------------------------------------------------------------
14 READY 0 0 0
-------------------------------------------------------------------
15 READY 0 0 0
-------------------------------------------------------------------
16 READY 0 0 0
-------------------------------------------------------------------
17 READY 0 0 0
-------------------------------------------------------------------
18 READY 0 0 0
-------------------------------------------------------------------
19 READY 0 0 0
-------------------------------------------------------------------To display the statistics of the TRFA resource the following commands are used:
Shows the total number of requests, the number of requests that were successfully executed, the number of requests that were not satisfied, the number of requests for which the traffic tracing was not activated and the number of failures due to an address overflow.
[15:53:05] ABILIS_CPX:d s trfa
RES:Trfa ----------------------------------------------------------------------
Traffic_Analyzer
--- Cleared 10 days 19:24:36 ago, on 16/04/2015 at 19:42:51 ------------
- Send/Receive statistics ----------------------------------------------
-----------|---TOTAL---|---SUCC----|---FAIL----|---INACT---|-OVERFLOW--|
REQUESTS | 89267076| 89267076| 0| 0| 0|
REQUESTS-RT| 71547| 71547| 0| 0| 0|
------------------------------------------------------------------------
- IP Traps statistics ----------------------------------------------------
Ip-11 | Cur/Cfg | Cur/Cfg | Cur/Cfg
|- (5 Min Kbit/sec) --+- (30 Min Kbit/sec) -+-- (2 Hr Kbit/sec) --
THR-IN | 0/1000 | -/- | -/-
|--- (Day MBytes) ----+--- (Week MBytes) ---+-- (Month MBytes) ---
CHR-IN | 0/500 | -/- | -/-
-------+---------------------+---------------------+---------------------
- CTI Traps statistics ---------------------------------------------------
*** No TRFA CTI traps *** The debug commands are useful for various activities, e.g. clearing files, removing data originated from a temporary configuration error, removing obsolete data after a line change, etc..
[11:44:43] ABILIS_CPX:_debug res:trfa
RES:Trfa ----------------------------------------------------------------------
Traffic_Analyzer
BufferLength:3092 Date/Time:27/04/2015 15:08:07 TraceTime:263604665
Usage:
LSN:0 - This help
LSN:2 - Show information related to analyzed frames
LSN:2 CMD:CLR - Clear analyzed frames information
LSN:3 - Show current TRFA log
LSN:3 CMD:CLR - Clear TRFA log
LSN:4 - DATA File status
LSN:5 - BACKUP File status
LSN:6 - TEMPORARY File status
LSN:7 - Display real-time Session Monitor
LSN:8 - Display historical temporary Sessions
LSN:10 CMD:param,... - Purge IP and/or PROT records from the files.
IPRES:<ipres>|* - IP resource (*=all).
TYPE:ip|prot|ip-prot - Type of purge.
ARCHIVE:day|week|month|year|history|*
- Archive to be purged (*=all).
YEAR is mandatory for ARCHIVE:history or *.
YEAR:<yyyy>|* - Year to be purged (*=all).
(only for ARCHIVE:history or *).
IP:<x.x.x.x>|<x.x.x.x-y.y.y.y>|*
- IP address or range to be purged (*=all).
(only for TYPE:ip or ip-prot).
FROM:ddmmyyyy[-hhmm] - Optional start date/time.
If missing the interval starts from older record.
TO:ddmmyyyy[-hhmm] - Optional end date/time.
If missing the interval ends with newer record.
LSN:11 CMD:param,... - Purge IP addresses with total traffic below
the specified level from the files.
IPRES:<ipres>|* - IP resource (*=all).
ARCHIVE:day|week|month|year|history|*
- Archive to be purged (*=all).
YEAR is mandatory for ARCHIVE:history or *.
YEAR:<yyyy>|* - Year to be purged (*=all).
(only for ARCHIVE:history or *).
BYTES:<bytes> - Traffic level (in BYTES).
LSN:12 CMD:param,... - Delete archive files.
IPRES:<ipres>|* - IP resource (*=all).
ARCHIVE:day|week|month|year|history|*
- Archive to be purged (*=all).
YEAR is mandatory for ARCHIVE:history or *.
YEAR:<yyyy>|* - Year to be purged (*=all).
(only for ARCHIVE:history or *).
LSN:21 - Display DISA statistics
LSN:21 CMD:CLR - Clear DISA statistics
LSN:22 - Display USER statistics
LSN:22 CMD:CLR - Clear USER statistics
LSN:23 - Display ROUTER statistics
LSN:23 CMD:CLR - Clear ROUTER statistics
LSN:24 CMD:name - Display DISA diagnostics
LSN:25 CMD:index - Display ROUTER diagnostics
LSN:26 CMD:name - Display ROUTER diagnostics
LSN:27 CMD:name - Display DISA diagnostics into time window
LSN:28 CMD:name - Display ROUTER diagnostics into time window
LSN:900 CMD:START - Activate CTI random data generation
LSN:900 CMD:STOP - Deactivate CTI random data generation
| |  | |
| 43.1. TRFA resource |  | 43.3. Example of TRFA configuration |