68.6. How to configure CELLBOX or CELLKEY as gateway for Internet
Prev Chapter 68. HowTo - Networking Next

68.6. How to configure CELLBOX or CELLKEY as gateway for Internet

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

a dev:cellkey-1

or

a dev:cellbox-1

Add the cellkey-1 device.

or

Add the cellbox-1 device.

s p ctip:501 pdn-apn:mobile.itConfigure the APN (e.g. mobile.it).

Type the following commands to configure the ip resource:

a res:ip-11 subtype:pppAdd an IP over PPP resource.
s p ip-11 descr:UMTS-DATAConfigure the description of the ip resource.
s p ip-11 lowres:ctislinkSet to CtiSLink the lowres of the ip resource.
s p ip-11 nrty:30 rty:usConfigure the number of calls retry
s p ip-11 nrty3:nomaxConfigure the PPP authentication number retry.
s p ip-11 cdo:99Configure the called output number.
s p ip-11 nat:outsideEnable nat for the ip resource.
s p ip-11 ipadd:retrieve neigh:retrieveConfigure a dynamic IP address.
s p ip-11 username:provider_user password:provider_pwdConfigure the login information.
s p ip-11 local:chap,pap remote:noneConfigure the local and remote authentication protocol.
save confSave the configuration.
warm startRestart Abilis.

Configure the default IP route

a ipr net:0.0.0.0/0 ip:11Add a default route by configuring in the IP parameter the IP resource associated to the WAN connection.
save confSave the configuration.
[Note]Note

In the Console configurator, you must type the command: a sipr id:0 net:0.0.0.0/0 ip:11

Type the following commands to configure the data routing:

a ctir pr:1 descr:umts-data bci:data cdi:99 poi:Sl out:501 sp:64000Add a rule to route data to ctip 501.
init ctirInitialize the CTIR resource.
save confSave the configuration.
Prev Up Next
68.5. How to configure HDSL/SHDSL connections using V.35/G.703 synchronous ports Home 68.7. How to configure CELLBOX or CELLKEY as backup for Internet