| 83.28. How to activate the SNMP agent | ||
|---|---|---|
 | Chapter 83. HowTo - Networking |  |
| 83.28. How to activate the SNMP agent | ||
|---|---|---|
| | Chapter 83. HowTo - Networking | |
Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.
| a
res:snmp or s act res:snmp | Add the SNMP resource. or If the resource already exists, set it active. |
| s p snmp act:yes | Enable the SNMP runtime functionalities. |
| s p snmp ipsrc:192.168.1.50 | Configure the accepted source IP address. |
| s p snmp trap:yes | Enable SNMP traps generation. |
| s p snmp trapdest:192.168.1.50 | Configure the Traps destination IP address. |
| save conf | Save the configuration. |
On a working Abilis, a system restart is required to make the SNMP resource running.
| |  | |
| 83.27. How to activate the SNTP resource |  | 83.29. How to publish the users on the Abilis LDAP server |