Chapter 83. HowTo - Networking
Part VI. HowTo
HowTo - Networking
Table of Contents
83.1. How to configure LAN settings
83.2. How to activate a new Ethernet port
83.3. How to activate a new USB Ethernet port
83.4. How to assign several IP addresses to the same LAN port
83.5. How to assign a VLAN for Ethernet interface
83.5.1. How to assign multiple VLANs to the same Ethernet interface
83.6. How to change the MAC address of the Ethernet or EthernetUSB interface
83.7. How to configure ADSL connections using USB modems
83.7.1. How to configure a RFC 1483 connection
83.7.2. How to configure a PPPoA (RFC 2364) connection
83.7.3. How to configure a PPPoE connection
83.7.4. How to configure a IPoE connection with static IP
83.7.5. How to configure a IPoE connection with dynamic IP
83.8. How to configure ADSL/VDSL connections using Ethernet modems
83.8.1. Ethernet: How to configure a PPPoE connection
83.8.2. Ethernet: How to configure a IPoE connection with static IP
83.9. How to configure VDSL connections using USB modems
83.9.1. VDSL: How to configure a PPPoE connection
83.9.2. VDSL: How to configure a IPoE connection with static IP
83.10. How to configure UMTS-BOX or LTE-BOX as gateway for the Internet
83.11. How to configure UMTS-BOX or LTE-BOX as backup for the Internet
83.12. How to configure the default IP route
83.12.1. How to configure the default IP route in case Abilis is connected to an ADSL USB or V.35/G.703 modem
83.12.2. How to configure the default IP route in case Abilis is connected to an Ethernet ADSL router
83.12.3. How to configure an alternative default IP route
83.13. How to configure the Network Address Translation (NAT)
83.14. How to share a single Internet connection among multiple computers
83.15. How to access IP hosts and services which are behind a NAT manager (port forwarding)
83.16. How to configure the NAT loopback
83.17. How to redirect DNS requests to Abilis
83.18. How to setup DDNS service on Abilis
83.18.1. How to setup DDNS service using dyndns.org
83.18.2. How to setup DDNS service on Abilis
83.19. How to configure a Remote Access Server (RAS)
83.19.1. How to configure a RAS using IPSEC VPN server
83.19.2. How to configure a RAS using IPSEC VPN server with iPhone/iPad or Mac
83.19.3. How to configure a RAS using PPPoE connections with an Ethernet/WiFi network
83.19.4. How to configure a RAS using ISDN network
83.20. How to configure an ISDN PPP Dial-UP connection
83.21. How to configure a VPN tunnel between two Abilis
83.21.1. How to configure a VPN tunnel where both Abilis have a static public IP address
83.21.2. How to configure a VPN tunnel where one Abilis has a dynamic public IP address or is placed behind a router doing NAT/PAT
83.21.3. How to configure a VPN tunnel with the “
backup over ISDN
” option
83.21.4. How to configure a VPN tunnel with the “
double path
” option
83.22. How to configure more VPN tunnels into IP Load Balancing (IPLB)
83.23. How to configure a voice tunnel between two Abilis
83.23.1. How to configure a voice tunnel where both Abilis have a static public IP address
83.23.2. How to configure a voice tunnel where one Abilis has a dynamic public IP address or is placed behind a router doing NAT/PAT
83.23.3. How to configure a voice tunnel with the “
backup over ISDN
” option
83.23.4. How to configure a voice tunnel with the “
double-path
” option
83.24. How to activate the DHCP resource
83.24.1. How to activate the DHCP in relay mode
83.24.2. How to activate the DHCP in server mode
83.24.3. How to activate the DHCP in client mode
83.25. How to activate the IP TRFA resource
83.26. How to use state detection of IP interfaces
83.27. How to activate the SNTP resource
83.27.1. How to activate the SNTP client
83.27.2. How to activate the SNTP server
83.28. How to activate the SNMP agent
83.29. How to publish the users on the Abilis LDAP server
