83.25. How to activate the IP TRFA resource

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

a res:trfa

or

s act res:trfa

Add the TRFA resource.

or

If the resource already exists, set it active.

s p trfa act:yesEnable the TRFA runtime functionalities.
s p trfa act-ip:yesEnable the IP traffic analysis.
 Activate the HTTP server and enable a user to access the “IP traffic analyzer” link.
 Repeat the following commands for each IP resource for which you want to activate the TRFA.
s p ip-n trfa:yesEnable the traffic analysis.
s p ip-n trfa-mode:ipSelect traffic analysis mode.
s p ip-n trfa-side:local

or

s p ip-n trfa-side:remote trfa-ipadd:*

TRFA-SIDE:LOCAL in a LAN, AIPT (AIPT-BCK) resource.

or

TRFA:OUTSIDE in a PPP or DL (DL-BCK) resource.

save confSave the configuration.

On a working Abilis, a system restart is required to make the TRFA resource running.

[Tip]Tip

To enable the “TOP10 IP” feature, you must configure the TRFA-MODE parameter to IP or IP-PROT (e.g. s p ip-n trfa-mode:ip-prot).

[Tip]Tip

For the description of the TRFA web pages refer to Section 53.4.3, “Using HTTP for showing IP TRFA statistics”.