| 84.24. Sending Alarm through a call | ||
|---|---|---|
 | Chapter 84. HowTo - CTI system |  |
| 84.24. Sending Alarm through a call | ||
|---|---|---|
| | Chapter 84. HowTo - CTI system | |
Suppose you have an IOBOX connected to the Abilis and you want to receive a call with a announcement when the gate will open. A digital sensor from the gate is connected at the Abilis in the Digital Input Line number 2. The alarm must be sent if the Digital Input 2 becomes ON.
The first step to follow is to prepare the sound files to be played by DISA. More information are in the section Section 62.8, “Message files”.
Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.
a res:ctidisa or s act res:ctidisa | Add the CTIDISA
resource. or If the resource already exists, set it active. |
| s p ctidisa act:yes | Enable the CTIDISA runtime functionalities. |
a res:alarm or s act res:alarm | Add the ALARM
resource. or If the resource already exists, set it active. |
| s p alarm act:yes | Enable the ALARM runtime functionalities. |
| save conf | Save the configuration. |
| warm start | Restart Abilis. |
| s p ctidisa restricted-calling:yes | Reject calls also from calling numbers that aren't present in CTIDISA USERs CGI. |
| a ctidisa service:callback | Create a CTIDISA service named “callback”. |
| s ctidisa service:callback cb:yes | Enable Call Back for the service “callback”. |
| s ctidisa service:callback initdial:callback_sound | Set the name of the message group from which the message INITDIAL must be taken. |
| a ctidisa user:callback_user | Create a CTIDISA user named “callback_user”. |
| s ctidisa user:callback_user cb:yes | Enable Call Back for the user “callback_user”. |
| s ctidisa user:callback_user pin:4321 | Set the Personal Identification Number for the user “callback_user”. |
| a alarm id:0 enabled:yes res:mfio io:d-in-2
trigger:on action:disa-cb or a alarm id:0 enabled:yes res:gpio-1 io:d-in-2 trigger:on action:disa-cb | Add a alarm what will make a call (CTIDISA Call Back) when
the Digital Input 2 becomes ON (Command for the MFIO
resource). or Add a alarm what will make a call (CTIDISA Call Back) when the Digital Input 2 becomes ON (Command for the GPIO-1 device). |
| s alarm id:0 disa-user:callback_user disa-service:callback | Set the alarm parameters corresponding with the CTIDISA user and the CTIDISA service. |
| s alarm id:0 disa-cdo:555 disa-cgo:222 | Set calling and called numbers for the call. |
| save conf | Save the configuration. |
| init res:ctidisa | Initialize the CTIDISA resource. |
| init alarm | Initialize the Alarm rules. |
CTI routing configuration:
| a ctir pr:0 poi:disa out:101 cdi:555 | Add a CTI rule to route a call from DISA to a POTS phone which is connected to CTIP:101. |
| save conf | Save the configuration. |
| init ctir | Initialize the CTIR resource. |
![[Note]](../images/note.png) | Note |
|---|---|
The CTIDISA requires a separate licence in CPX |
![[Tip]](../images/tip.png) | Tip |
|---|---|
Interesting chapters: Section 20.6.1, “Activation of the alarms for the MFIO/GPIO”. |
| |  | |
| 84.23. How to activate On-Demand recording |  | 84.25. Sending Alarm through SMS |