51.1. CTIAS - CTI Advanced Services

51.1. CTIAS - CTI Advanced Services
	Chapter 51. CTIAS - CTI Advanced Services

CTIAS resource is the container of CTI plugins (Voice mail, Virtual Office, Conference, Voice recorder and other services which will be developed in the future releases). Administrator can choose to:

Activate CTIAS and then the desired plugins;
Activate directly the desired plugin. The Abilis will automatically activate the CTIAS resource if it's not.

51.1.1. Activating the CTIAS resource

Add the resource to the Abilis system with the following command:

[09:08:14] ABILIS_CPX:a res:ctias

RES:CTIAS ALREADY EXISTS

The CTIAS resource may already exist in the system, but may not yet be active. Set it active with the command:

[09:10:00] ABILIS_CPX:s act res:ctias

COMMAND EXECUTED

	Caution
	You must restart the Abilis to make the resource running (use the command warm start to reboot the Abilis) after adding or setting the CTIAS active.

[13:07:41] ABILIS_CPX:d p ctias

RES:CtiAs ---------------------------------------------------------------------
Run    DESCR:CTI_Advanced_Services_entry_point
       sesnum:0     TC-SESNUM:1

	Caution
	Execute the initialization command init res:ctias to activate the changes made on the upper case parameters; use save conf and warm start commands to set active the changes made on the lowercase parameters.

51.1.2. CTIAS resource parameters

Use the command below to display the parameters of the resource; the d p ctias ? command shows the meaning of parameters.

[13:07:41] ABILIS_CPX:d p ctias

RES:CtiAs ---------------------------------------------------------------------
Run    DESCR:CTI_Advanced_Services_entry_point
       sesnum:0     TC-SESNUM:1

Meaning of the parameters:

sesnum: Number of sessions that the CTIAS can support at once [0..255] <ReadOnly>.

TC-SESNUM: Number of on-the-fly simultaneous transcoding session allowed for ALL plugins [0..255].

The following command allows the administrator to change the configuration of the resource:

s p ctias parameter:value...

	Caution
	Execute the initialization command init res:ctias to activate the changes made on the upper case parameters; use save conf and warm start commands to set active the changes made on the lowercase parameters.


Chapter 51. CTIAS - CTI Advanced Services		51.2. CTIVM - CTI Voice Mail