70.12. How to upgrade ADSL2+ modem firmware

70.12. How to upgrade ADSL2+ modem firmware
	Chapter 70. HowTo - Management

Fix problems of connection and disconnection of USB ports, which generates interference in the presence of other modems or USB devices.

The modems already installed can be updated via Abilis in this way:

Download the firmware file from "Downloads Firmware" category from http://support.abilis.net (Username:abilis Password:abilis) in the section "Abilis ADSL2+".
Upload it on the Abilis where is connected the modem, in the current directory (with command "file put z adsl2.bin").

The modem must be connected and "seen" by a dev:adslusb and relative res:adsl.

[10:54:44] ABILIS:d dev

------------------ Active PCI Devices and Physical Resources: -----------------

Device(s)   Run Physical Resource(s) or CTI Port(s)          SlotId  Addr  Irq
-------------------------------------------------------------------------------
ASY-1       Yes Async-1  . . . . . . . . . . . . . . . . . .      -   3F8    4
ETH-1       Yes Eth-1  . . . . . . . . . . . . . . . . . . .     64   PCI ( 11)
ETH-2       Yes Eth-2  . . . . . . . . . . . . . . . . . . .     32   PCI ( 11)
BRI8-1      Yes 31..38 . . . . . . . . . . . . . . . . . . .    128   PCI ( 10)

------------------ Active USB Devices and Physical Resources: -----------------
Device(s)   Run Con Physical Resource(s) or CTI Port(s)    USBPORTID
-------------------------------------------------------------------------------
ADSLUSB-1   Yes Yes Adsl-1 . . . . . . . . . . . . . . . . 0.0.0

[10:54:50] ABILIS:d usbdev

USB Server Overview:

ID  VendorId/Manufacturer     ProductId/Product                Ver UsbPortId

-------------------------------------------------------------------------------
1   0000 On Time              0000 EHCI Virtual Root Hub      0.00 0
2   0000 On Time              0000 EHCI Virtual Root Hub      0.00 1
3   8087                      0024                            0.00 0.0
4   8087                      0024                            0.00 1.0
5   07A6 Abilis               4610 ADSL2+                     3.13 0.0.0

Run the command "debug res:adsl-x cmd:d lsn:999", where x is the number of resource ADSL.

If the upload is successful will be shown on display and the modem will restart.

[10:54:50] ABILIS:d usbdev

USB Server Overview:

ID  VendorId/Manufacturer     ProductId/Product                Ver UsbPortId 
-------------------------------------------------------------------------------
1   0000 On Time              0000 EHCI Virtual Root Hub      0.00 0         
2   0000 On Time              0000 EHCI Virtual Root Hub      0.00 1         
3   8087                      0024                            0.00 0.0       
4   8087                      0024                            0.00 1.0       
5   07A6 Abilis               4610 ADSL2+                     3.18 0.0.0

If the upload fails will be shown on display.

	Note
	The Abilis ADSL2+ modem is supported starting with Abilis firmware version 7.5.


70.11. How to replace ADSL modem with ADSL2+ modem		70.13. How to upgrade UMTSBOX-2 firmware