| 72.13. How to configure OPC to collect call information from a remote Abilis | ||
|---|---|---|
 | Chapter 72. HowTo - CTI system |  |
| 72.13. How to configure OPC to collect call information from a remote Abilis | ||
|---|---|---|
| | Chapter 72. HowTo - CTI system | |
Assumptions:
The OPC resource is already active on both local and remote Abilis.
The user of the remote Abilis can access the remote OPC (in the example login:admin, password: admin)
Enter into the local Abilis control-program or open the configuration file with the Console configurator and type the following commands.
| s p opc maxremotes:5 | Set the max number of remote Abilis to monitor. |
| s p opc rem:0 abilisid:test | Configure the abilisid of the remote Abilis. |
| s p opc rem:0 server:192.168.1.150 | Configure the IP address of the remote Abilis. |
| s p opc rem:0 login:admin password:admin | Set login and password to access the remote Abilis OPC. |
| s p opc rem:0 enabled:yes | Enable the access the remote ABILIS OPC. |
| save conf | Save the configuration. |
On a working Abilis, you must initialize the OPC resource: init res:opc.
| |  | |
| 72.12. How to configure the Speed Limit |  | 72.14. How to activate the Accounting service |