72.15. How to enable pickup service for a POTS/ISDN port

72.15. How to enable pickup service for a POTS/ISDN port
	Chapter 72. HowTo - CTI system

72.15. How to enable pickup service for a POTS/ISDN port

The first step is to follow the instructions in the chapter How to configure FXS (POTS) ports for analog telephones or fax machines, in order to verify physical connections and to configure the POTS device.

Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.

s ctip:101 ss:yes	Enable supplementary services (ss) accessible through “*” as first digit in the called number for the port CTIP 101.
s ctip:101 ss-pickup:any	Set the pickup permission to any call.
init ctisys	Initialize the CTISYS resource.
save conf	Save the configuration.

	Tip
	The parameter ss-pickup can be set to: NO to disable pickup, ANY to pickup any call or GROUP to pickup only calls belonging to its own group (the parameter PICKUP of the group must be equal to YES).

	Tip
	Refer to chapter Section 72.4, “How to program a group of telephone lines” to know how to configure a group of phones.


72.14. How to activate the Accounting service		72.16. How to enable pickup service for a SIP account