| 72.25. Sending Alarm through SMS | ||
|---|---|---|
 | Chapter 72. HowTo - CTI system |  |
| 72.25. Sending Alarm through SMS | ||
|---|---|---|
| | Chapter 72. HowTo - CTI system | |
CTISMS resource allows to send SMS through an UMTS-BOX or CELLKEY devices.
Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.
a res:ctisms or s act res:ctisms | Add the CTISMS resource. or If the resource already exists, set it active. |
| s p ctisms act:yes | Enable the CTISMS runtime functionalities. |
a res:alarm or s act res:alarm | Add the ALARM
resource. or If the resource already exists, set it active. |
| s p alarm act:yes | Enable the ALARM runtime functionalities. |
| save conf | Save the configuration. |
| warm start | Restart Abilis. |
| s ctisms out pr:1 act:yes | Enable CTI SMS routings for outgoing messages. It routes outgoing messages stored in a CSV file or sent via Web interface toward a CTIP port corresponding to the desired SIM. |
| a alarm id:0 enabled:yes res:mfio io:d-out-2 monitor:on action:sms | Add a alarm what will make a SMS when the Digital Output 2 becomes ON (Command for the MFIO resource). |
| s alarm id:0 sms-cdo:3333333333 | Set outgoing called number for SMS. |
| init res:ctisms | Initialize the CTISMS resource. |
| init alarm | Initialize the Alarm rules. |
| save conf | Save the configuration. |
![[Note]](../images/note.png) | Note |
|---|---|
The CTISMS requires a separate licence in CPX |
![[Tip]](../images/tip.png) | Tip |
|---|---|
Interesting chapters: |
| |  | |
| 72.24. Sending Alarm through a call |  | Chapter 73. HowTo - Abilis VMX |