| 72.6. How to change the MAC address of the Ethernet or EthernetUSB interface | ||
|---|---|---|
 | Chapter 72. HowTo - Networking |  |
| 72.6. How to change the MAC address of the Ethernet or EthernetUSB interface | ||
|---|---|---|
| | Chapter 72. HowTo - Networking | |
Enter into the Abilis control-program or open the configuration file with the Console configurator and type the following commands.
| s p eth-3
mac-addr:00-E0-4C-20-04-28 or s p ethusb-1 mac-addr:00-E0-4C-20-04-29 | Change the MAC address for Ethernet interface (e.g.
Eth-3). or Change the MAC address for EthernetUSB interface (e.g. EthUsb-1). |
| save conf | Save the configuration. |
| init
res:eth-3 or init res:ethusb-1 | Initialize the Ethernet resource (e.g.
Eth-3). or Initialize the EthernetUSB resource (e.g. EthUsb-1). |
![[Warning]](../images/warning.png) | Warning |
|---|---|
Broadcast and multicast addresses aren't allowed. |
| |  | |
| 72.5. How to assign a VLAN for Ethernet interface |  | 72.7. How to configure ADSL connections using USB modems |