Chapter 72. HowTo - Networking
Part VI. HowTo
HowTo - Networking
Table of Contents
72.1. How to configure LAN settings
72.2. How to activate a new Ethernet port
72.3. How to activate a new USB Ethernet port
72.4. How to assign several IP addresses to the same LAN port
72.5. How to assign a VLAN for Ethernet interface
72.5.1. How to assign multiple VLANs to the same Ethernet interface
72.6. How to change the MAC address of the Ethernet or EthernetUSB interface
72.7. How to configure ADSL connections using USB modems
72.7.1. How to configure a RFC 1483 connection
72.7.2. How to configure a PPPoA (RFC 2364) connection
72.7.3. How to configure a PPPoE connection
72.7.4. How to configure a IPoE connection with static IP
72.7.5. How to configure a IPoE connection with dynamic IP
72.8. How to configure ADSL/VDSL connections using Ethernet modems
72.8.1. Ethernet: How to configure a PPPoE connection
72.8.2. Ethernet: How to configure a IPoE connection with static IP
72.8.3. Ethernet: How to configure a RFC 1483 connection
72.9. How to configure VDSL connections using USB modems
72.9.1. VDSL: How to configure a PPPoE connection
72.9.2. VDSL: How to configure a IPoE connection with static IP
72.10. How to configure HDSL/SHDSL connections using V.35/G.703 synchronous ports
72.11. How to configure CELLBOX or CELLKEY as gateway for Internet
72.12. How to configure CELLBOX or CELLKEY as backup for Internet
72.13. How to configure the default IP route
72.13.1. How to configure the default IP route in case Abilis is connected to an ADSL USB or V.35/G.703 modem
72.13.2. How to configure the default IP route in case Abilis is connected to an Ethernet ADSL router
72.13.3. How to configure an alternative default IP route
72.14. How to configure the Network Address Translation (NAT)
72.15. How to share a single Internet connection among multiple computers
72.16. How to access IP hosts and services which are behind a NAT manager (port forwarding)
72.17. How to configure the NAT loopback
72.18. How to setup DDNS service on Abilis
72.18.1. How to setup DDNS service using dyndns.org
72.18.2. How to setup DDNS service on Abilis
72.19. How to configure a Remote Access Server (RAS)
72.19.1. How to configure a RAS using IPSEC VPN server
72.19.2. How to configure a RAS using IPSEC VPN server with iPhone/iPad or Mac
72.19.3. How to configure a RAS using PPPoE connections with an Ethernet/WiFi network
72.19.4. How to configure a RAS using ISDN network
72.20. How to configure an ISDN PPP Dial-UP connection
72.21. How to configure a VPN tunnel between two Abilis
72.21.1. How to configure a VPN tunnel where both Abilis have a static public IP address
72.21.2. How to configure a VPN tunnel where one Abilis has a dynamic public IP address or is placed behind a router doing NAT/PAT
72.21.3. How to configure a VPN tunnel with the “
backup over ISDN
” option
72.21.4. How to configure a VPN tunnel with the “
double path
” option
72.22. How to configure more VPN tunnels into IP Load Balancing (IPLB)
72.23. How to configure a voice tunnel between two Abilis
72.23.1. How to configure a voice tunnel where both Abilis have a static public IP address
72.23.2. How to configure a voice tunnel where one Abilis has a dynamic public IP address or is placed behind a router doing NAT/PAT
72.23.3. How to configure a voice tunnel with the “
backup over ISDN
” option
72.23.4. How to configure a voice tunnel with the “
double-path
” option
72.24. How to activate the DHCP resource
72.24.1. How to activate the DHCP in relay mode
72.24.2. How to activate the DHCP in server mode
72.24.3. How to activate the DHCP in client mode
72.25. How to activate the IP TRFA resource
72.26. How to use state detection of IP interfaces
72.27. How to activate the SNTP resource
72.27.1. How to activate the SNTP client
72.27.2. How to activate the SNTP server
72.28. How to activate the SNMP agent
72.29. How to publish the users on the Abilis LDAP server
