| What's new | ||
|---|---|---|
 |  | |
| What's new | ||
|---|---|---|
| | | |
![[Important]](../images/important.png) | Important |
|---|---|
Remember from release 8.0:
|
New features of the release 8.4:
VDSL2: added support for Abilis VDSL2 modem.
ADSL: the device and resource have been
renamed:
from DEV:ADSLUSB to
DEV:DSLUSB.
from RES:ADSL to
RES:DSL.
EthUsb: added support of VLANs.
Sip: added more options for setting DISPLAY-NAME
value in the direction Abilis->Sip device.
IO:
added support for Remote I/O (RIO) devices.
the a res:io command must be used to
create the IO subsystem needed to handle all RIO devices. The RIO
devices are dynamically created or removed through the Rio/Rvs
configuration web interface, and they appear in
Abilis as RIO-x resources.
VS:
Added support for Remote VideoSurveillance (RVS) devices.
The a res:vs command must be used to
create the VS subsystem needed to
handle all RVS devices. The RVS devices are dynamically created or
removed through the Rio/Rvs
configuration web interface, and they appears in
Abilis as RVS-x resources.
Added support of RVS version 5.x.
IPConf:
Added IpConf resource that permits discovery and initial
configuration of RIO and RVS devices. The resource is added
automatically when either IO or
VS resources are added. The interface of this
resource is the Rio/Rvs
configuration web page in the Administration
section.
IOHUB:
the former GPIOPC is now called
IOHUB.
added IOLOG feature to store on compact
flash or hard disk the IO events.
IOLOG events recording is configurable
via the standard CP interface.
IOLOG events are viewable as graphs in
the Automation log
web page in the Administration
section.
IP resource: performance improvements of IP
over LAN by removal of the internal IPLAN
layer.
LUA (Script): added support for RIO and RVS
I/O.
CTIR router: improved software transcoder by
handling a jitter buffer whose size is automatically adjusted to the
negotiated MJ value.
NPV: added FQDN management to
REMIPx parameters.
Abilis AIPT and PV: added
FQDN management to REMIPx parameters.
SNTP: improved time adjustment by smoothing
the time change when the difference is below 1 minute. This
modification avoids jumps back of the time if the difference is within
1 minute.
Virtual Office: improved Abilisphone reaction
to incoming events on IOS.
PCI-PCIe: changed the (re)assignment order of
PCI/PCIe cards. Now the PCIe cards are assigned first.
Boot Manager (BM):
Added BM version identification, which is made available in D I, SYS BMVERIFY, SYS BMINSTALL commands.
Call Logs: added possibility to exports call
logs in CSV format. Two types of exports are possible: limited and extended. They are automatically chosen based
on current view.
Control Port:
Added D PCIDEVE command. It displays
extended informations.
Improved D DEV output. Now "Active PCI
Devices" shows PCI vs PCIe bus type and clearly indicates if Slot
Id is manually reconfigured for the use at next boot.
Added commands to verify and install Boot Manager (BM).
Added DEBUG FILE CONF command. It
displays the internal file system driver configuration.
SSL/TLS
Extended SSL with a set of new characteristics:TLS v.1.2, 4096 bits RSA keys, AES-256-CBC, protect from poodle TLS attack vulnerability, secure renegotiation.
