5.9. Users Table

5.9. Users Table
	Chapter 5. Command language

The service of user authentication is provided through a centralized “archive” where users are defined as well as the services to which they have access and some service-related parameters. These services are:

CHAT

Two default users exist: admin and guest: they can't be removed and are disabled by default.

Admin user can be activated only with a password not empty, while guest user can't have a password.

Users Table can be managed with the following commands:

d user: displays the Users table;
a user: adds a new user;
c user: clears an existing user;
s user: modifies the parameter of an existing user.

5.9.1. D USER (Display User)

This command shows the content of the Users Table in a synthetic format. The available syntax of the commands is:

d user: shows the user's list;
d user:<username> : shows the Users Table entry identified by the “user:<username>” in a synthetic format, i.e. The parameters of the services which aren't enabled are omitted.

[15:36:52] ABILIS_CPX:d user

------------------------+-------------+----------------------------------------
USER             PWD ACT|CTIP CLUS    |CHAT LDAP PPP FTP HTTP MAIL IAX SIP VO
------------------------+-------------+----------------------------------------
admin            *** YES #    #        NO   YES  YES YES YES  NO   NO  NO  NO
guest                NO  #    #        NO   NO   NO  NO  NO   NO   NO  NO  NO

[15:36:57] ABILIS_CPX:d user:admin

Parameter:          | Value:
--------------------+----------------------------------------------------------
USER:                 admin
REAL-NAME:            admin
ID:                   1             <Read Only>
PWD:                  ***
ACT:                  YES
GROUP:                
CTIP:                 #
CLUS:                 #
ADDRBOOK-SYNC:        NO            
ADDRBOOK-NUMBER:      AUTO          
ADDRBOOK-OUTDIAL:     NONE          
ADDRBOOK-PRIV-MAX:    SYS
ADDRBOOK-PUB-ENABLED: YES           <Read Only>
IO-MAP:               #
OPC-ROLE:             OPERATOR
OPC-VIEW:             *
OPC-HIDE-NUMBERS:     NO
OPC-MONITOR:          NONE
OPC-PRIVACY:          NO
CHAT:                 YES   
CHAT-USER:            SYS
CHAT-PWD:             SYS
LDAP:                 YES   
LDAP-OWN-ADDRBOOK:    NO            
PPP:                  YES
PPP-AUTH:             CHAP
PPP-RES:              ANY
PPP-NEIGH:            #
PPP-MASK:             255.255.255.255
PPP-ROUTE:            #
FTP:                  YES   
FTP-HOMEDIR:          
FTP-PROT:             PLAIN,SSL
HTTP:                 YES
HTTP-HOME-URL:        
HTTP-PROT:            PLAIN,SSL
-------------------------------------------------------------------------------

5.9.1.1. D USERE (Display User Extended)

This command shows the content of the Users Table in extended format. The available syntax of the command is:

d usere: shows the list in extended format of all users
d usere:<username> : shows the content of the Users Table in extended format, i.e. all users defined with their full set of configuration information are displayed.

[15:41:01] ABILIS_CPX:d usere:admin

Parameter:          | Value:
--------------------+----------------------------------------------------------
USER:                 admin
REAL-NAME:            admin
ID:                   1             <Read Only>
PWD:                  ***
ACT:                  YES
GROUP:                
CTIP:                 #
CLUS:                 #
ADDRBOOK-SYNC:        NO            
ADDRBOOK-NUMBER:      AUTO          
ADDRBOOK-OUTDIAL:     NONE          
ADDRBOOK-PRIV-MAX:    SYS
ADDRBOOK-PUB-ENABLED: YES           <Read Only>
IO-MAP:               #
OPC-ROLE:             OPERATOR
OPC-VIEW:             *
OPC-HIDE-NUMBERS:     NO
OPC-MONITOR:          NONE
OPC-PRIVACY:          NO
CHAT:                 YES   
CHAT-USER:            SYS
CHAT-PWD:             SYS
LDAP:                 YES   
LDAP-OWN-ADDRBOOK:    NO            
PPP:                  YES
PPP-AUTH:             CHAP
PPP-RES:              ANY
PPP-NEIGH:            #
PPP-MASK:             255.255.255.255
PPP-ROUTE:            #
FTP:                  YES   
FTP-HOMEDIR:          
FTP-PROT:             PLAIN,SSL
HTTP:                 YES
HTTP-HOME-URL:        
HTTP-PROT:            PLAIN,SSL
MAIL:                 NO    
MAIL-MB-MAXSIZE:      SYS
MAIL-MB-MAXMAILS:     SYS
MAIL-MSG-LIFETIME:    SYS
MAIL-AUTH:            SYS
IAX:                  NO    
IAX-HOST:             DYNAMIC
IAX-SRCADD:           SYS
IAX-PORT:             (DYNAMIC)
IAX-IP-PERMIT:        *
IAX-MAXSES-BID:       2
IAX-MAXSES-IN:        0
IAX-MAXSES-OUT:       0
IAX-NUMBER:           
IAX-ADDRBOOK-NUM:     IAX-NUMBER
IAX-CG-NUM:           AUTO
IAX-FWD-CG-NUM:       CALLER
IAX-CTIP-TYPE:        SYS
IAX-RG-IN:            SYS
IAX-ROUTE-BY-SD:      NO            
IAX-PROVIDE-SG:       NO
IAX-CLIP-RULE:        SYS
IAX-BUSY-NOCHAN:      NO
IAX-LCS-GROUP:        NONE
IAX-CPO:              SYS
IAX-CPO-STATE:        SYS
IAX-CPO-DROP:         SYS
IAX-SS:               NO
IAX-SS-PICKUP:        GROUPS
IAX-SS-PRES-CG:       YES
IAX-SS-CF-DND:        YES
IAX-SS-VM:            YES
IAX-CONTEXT:          
IAX-PROVIDE-NAME:     BLANK
IAX-AUTH:             SYS
IAX-NETSTATS:         SYS
IAX-TRUNK:            SYS
IAX-TRUNK-FREQ:       SYS
IAX-TRUNK-TS:         SYS
IAX-CHAN-FREQ:        SYS
IAX-TRANSFER:         SYS
IAX-DISC-AUDIO:       SYS
IAX-HTML-IN:          SYS
IAX-HTML-OUT:         SYS
IAX-REM-USER:         
IAX-REM-PASS:                 
IAX-REM-AUTH:         SYS
IAX-REM-REG:          NO            
SIP:                  NO    
SIP-TYPE:             PHONE         
SIP-DOMAIN:           SYS
SIP-HOST:             DYNAMIC
SIP-TCP-REMPORT:      (DYNAMIC)
SIP-UDP-REMPORT:      (DYNAMIC)
sip-udp-locport:      SYS
SIP-SRCADD:           SYS
SIP-PROT:             UDP
SIP-IP-PERMIT:        *
SIP-MAXSES-BID:       2
SIP-MAXSES-IN:        0
SIP-MAXSES-OUT:       0
SIP-BUSY-INUSE:       NO
SIP-NUMBER:           
SIP-ADDRBOOK-NUM:     SIP-NUMBER
SIP-CG-NUM:           AUTO
SIP-FWD-CG-NUM:       CALLER
SIP-DISPLAY-NAME:     SYS
SIP-CTIP-TYPE:        SYS
SIP-RG-IN:            SYS
SIP-ROUTE-BY-SD:      NO            
SIP-PROVIDE-SG:       NO
SIP-CLIP-RULE:        SYS
SIP-BUSY-NOCHAN:      NO
SIP-LCS-GROUP:        NONE
SIP-CPO-RTP:          SYS
SIP-CPO-SIGNALLING:   SYS
SIP-RCC-DISABLE:      SYS
SIP-OPC-AUTOANSWER:   YES
SIP-SS:               NO
SIP-SS-PICKUP:        GROUPS
SIP-SS-PRES-CG:       YES
SIP-SS-CF-DND:        YES
SIP-SS-VM:            YES
SIP-AUTH:             SYS
SIP-CHAN-FREQ:        SYS
SIP-REMOTE-NAT:       NO
SIP-LOCAL-NAT:        NO
SIP-EXTERNAL-IP:      SYS
SIP-KEEPALIVE:        ENABLED
SIP-DTMF-MODE:        SYS
SIP-DISC-AUDIO:       SYS
SIP-BC-TRANSP:        UDI
SIP-T38:              SYS
SIP-T38-G711:         SYS
SIP-T38-PACKING:      SYS
SIP-T38-REDUND:       SYS
SIP-T38-REDUND-PCK:   SYS
SIP-UA:               SYS
SIP-UA-PERMIT:        *
SIP-REM-USER:         
SIP-REM-PASS:                 
SIP-REM-AUTH:         SYS
SIP-REM-AUTH-USER:    AUTO ()
SIP-REM-REG:          NO            
VO:                   NO
VO-CHANNELS:          1     
VO-PS-NUM:            SYS
VO-CB-NUM:            SYS
VO-CB-CGO:            SYS
-------------------------------------------------------------------------------

5.9.2. A USER (Add User)

This command adds a new entry in the Users Table.

[15:50:16] ABILIS_CPX:a user:pippo pwd:pippo http:yes

COMMAND EXECUTED

[15:50:33] ABILIS_CPX:d user

- Not Saved (SAVE CONF) -------------------------------------------------------
------------------------+-------------+----------------------------------------
USER             PWD ACT|CTIP CLUS    |CHAT LDAP PPP FTP HTTP MAIL IAX SIP VO
------------------------+-------------+----------------------------------------
admin            *** YES #    #        NO   YES  YES YES YES  NO   NO  NO  NO
guest                NO  #    #        NO   NO   NO  NO  NO   NO   NO  NO  NO
pippo            *** YES #    #        NO   NO   NO  NO  YES  NO   NO  NO  NO

	Note
	A restricted user name character set can be used. Avoided those characters that aren't valid in file names '\', '/', ':', '*', '?', '"', '>', '<', '\|'.

The following command displays the syntax:

[15:41:15] ABILIS_CPX:a user: ?

A USER:val [par:val]          Add an entry to the Users Access Control table
                              Up to 1000 users can be configured.

USER:      User name. Max. 32 ASCII characters.                    <Mandatory>
           Characters '\', '/', ':', '*', '?', '"', '<', '>', '|'
           and spaces are not allowed. Case is preserved.
           The strings "*", "#", "A" and "ALL", "anonymous" and
           "any-authenticated" are invalid/reserved to the system
           and cannot be used for user name value.

User's parameters:
...

5.9.3. C USER (Clear User)

This command deletes an entry in the Users Table.

[17:46:42] ABILIS_CPX:c user:user10

YOU ASKED TO DELETE USER 'user10'.

REMOVAL OF USER:user10 WILL ERASE Call Logs,
Voice Mail messages, Abilis Address book contacts and
LDAP Address book contacts OF THIS USER.
ALL OCCURRENCES OF THIS USER IN Http/Ftp/Ldap Rights, CtiVr Routings,
CtiIax/CtiSip/CtiVo Numbers AND OPC Lists WILL BE REMOVED.

PROCEED ANYWAY (N/Y)?y

COMMAND EXECUTED

The following command displays the syntax:

[15:47:55] ABILIS_CPX:c user: ?

C USER:val                    Clear a user from the Users Access Control table

USER:      User name. Max. 32 ASCII characters.                    <Mandatory>

5.9.4. S USER (Set User)

This command modifies an entry in the Users Table.

[15:51:07] ABILIS_CPX:s user:pippo ftp:yes

COMMAND EXECUTED

[15:51:26] ABILIS_CPX:d user:pippo

- Not Saved (SAVE CONF) -------------------------------------------------------
Parameter:          | Value:
--------------------+----------------------------------------------------------
USER:                 pippo
REAL-NAME:            pippo
ID:                   5             <Read Only>
PWD:                  ***
ACT:                  YES
GROUP:                
CTIP:                 #
CLUS:                 #
ADDRBOOK-SYNC:        SYS           
ADDRBOOK-NUMBER:      AUTO          
ADDRBOOK-OUTDIAL:     NONE          
ADDRBOOK-PUB-ENABLED: SYS  
IO-MAP:               #         
OPC-ROLE:             USER
OPC-VIEW:             *
OPC-HIDE-NUMBERS:     NO
OPC-MONITOR:          NONE
OPC-PRIVACY:          NO
CHAT:                 NO    
CHAT-USER:            SYS
CHAT-PWD:             SYS
FTP:                  YES   
FTP-HOMEDIR:          
FTP-PROT:             PLAIN,SSL
HTTP:                 YES
HTTP-HOME-URL: 
HTTP-PROT:            PLAIN,SSL
-------------------------------------------------------------------------------

The following command displays the syntax:

[15:47:53] ABILIS_CPX:s user: ?

S USER[E]:val par:val [par:val]      Set parameter(s) of an entry of the Users
                                     Access Control table

USER[E]:val    User name. Max. 32 ASCII characters.
USER[E]:A      All entries of the Users Access Control table
USER[E]:ALL    All entries of the Users Access Control table

User's parameters:
...


5.8. General and system information		5.10. Address book management