16.5. Activation of the alarms for IOBOX devices
Prev Chapter 16. IOBOX Next

16.5. Activation of the alarms for IOBOX devices

16.5.1. Activation of the alarms for the MFIO/GPIO

In case of Digital or Analog input variation is possible to activate alarms.

Example: send an e-mail if Digital Input 1 becomes ON.

[19:06:49] ABILIS_CPX:d p alarm

RES:Alarm ---------------------------------------------------------------------
Run    DESCR:Alarms_manager
       LOG:NO        ACT:YES            fifo-size:100
       MAIL-FROM:SYS (AbilisCPX<AbilisCPX@abilis>)
       MAIL-RCPT:#
       MAIL-BODY:STANDARD
       SMS-SENDER:CP-PI             SMS-CDO:#                              

[19:06:49] ABILIS_CPX:a alarm id:2 enabled:yes res:gpio-1 action:mail io:d-in-1 trigger:on mail-rcpt:alarms@mydomain.com

COMMAND EXECUTED

[19:32:28] ABILIS_CPX:d alarm id:2

-------------------------------------------------------------------------------
ID: |[DESCR:]
    |ENABLED:|RES:              |IO:         |TRIGGER: |ACTION:
    |MAIL-RCPT:
    |MAIL-RCPT-LIST:
    |MAIL-BODY:
    |SMS-CDO:
    |DISA-USER:                 |DISA-SERVICE:
    |DISA-CDO:                  |DISA-CGO:
-------------------------------------------------------------------------------
2     YES      Gpio-1             D-IN-1       ON        MAIL
     - MAIL -------------------------------------------------------------------
alarms@mydomain.com
     #
     SYS
-------------------------------------------------------------------------------

Corresponding command for MFIO:

[19:06:49] ABILIS_CPX:a alarm id:2 enabled:yes res:mfio action:mail io:d-in-1 trigger:on mail-rcpt:alarms@mydomain.com

COMMAND EXECUTED

[19:32:28] ABILIS_CPX:d alarm id:2

-------------------------------------------------------------------------------
ID: |[DESCR:]
    |ENABLED:|RES:              |IO:         |TRIGGER: |ACTION:
    |MAIL-RCPT:
    |MAIL-RCPT-LIST:
    |MAIL-BODY:
    |SMS-CDO:
    |DISA-USER:                 |DISA-SERVICE:
    |DISA-CDO:                  |DISA-CGO:
-------------------------------------------------------------------------------
2     YES      Mfio            D-IN-1       ON        MAIL
     - MAIL -------------------------------------------------------------------
alarms@mydomain.com
     #
     SYS
-------------------------------------------------------------------------------

To see the help online use the following command:

[19:06:49] ABILIS_CPX:a alarm id:2  res:gpio-1 action:mail ? trigger: io: 

Alarm management rule parameter(s):

TRIGGER:   Alarm/event to be monitored [NONE, TRAP, ALARM-ON, ALARM-OFF,
           ALARM-*, ON, OFF, LOW, NORMAL, HIGH, *]
           TRAP : allowed only for ACTION not equal to DISA-CB.
           TRAP, ALARM-ON, ALARM-OFF : allowed only for IO equal to #.
           ON, OFF, * : allowed only for Digital lines.
           LOW, NORMAL, HIGH, * : allowed only for Analog lines.
IO:        Input/output line for which the alarm/event is monitored. # or 
           - for Gpio: D-IN-n or D-OUT-n, where 'n' can be [1..16, *] or
                       A-IN-n, where 'n' can be [1..8, *];
           - for Mfio: D-IN-n or D-OUT-n, where 'n' can be [1..7, *];
           - for Rio : D-IN-n or D-OUT-n, where 'n' can be [1..16, *] or
                       A-IN-n or A-OUT-n, where 'n' can be [1..8, *];
           - for Rvs : D-IN-n or D-OUT-n, where 'n' can be [1..4, *].
                                         <Only for Gpio/MfIo/Rio/Rvs resources>
[Tip]Tip

Others informations about Alarm resource are available in the Section 35.1, “ALARM resource”.

[Tip]Tip

Interesting chapters:

Section 75.24, “Sending Alarm through a call”;

Section 75.25, “Sending Alarm through SMS”.

16.5.2. Activation of the alarms for the RVS/RIO

In case of Digital or Analog input/output variation is possible to activate alarms.

Example: send an e-mail if Digital Output 2 becomes ON on RVS device.

[19:06:49] ABILIS_CPX:d p alarm

RES:Alarm ---------------------------------------------------------------------
Run    DESCR:Alarms_manager
       LOG:NO        ACT:YES            fifo-size:100
       MAIL-FROM:SYS (AbilisCPX<AbilisCPX@abilis>)
       MAIL-RCPT:#
       MAIL-BODY:STANDARD
       SMS-SENDER:CP-PI             SMS-CDO:#                              

[14:53:28] ABILIS_CPX:a alarm id:7 enabled:yes res:rvs-1 action:mail io:d-out-1 trigger:on mail-rcpt:alarms@mydomain.com

COMMAND EXECUTED 

[14:53:35] ABILIS_CPX:d alarm id:7

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------
-------------------------------------------------------------------------------
ID: |[DESCR:]
    |ENABLED:|RES:              |IO:         |TRIGGER: |ACTION:
    |MAIL-RCPT:
    |MAIL-RCPT-LIST:
    |MAIL-BODY:
    |SMS-CDO:
    |DISA-USER:                 |DISA-SERVICE:
    |DISA-CDO:                  |DISA-CGO:
-------------------------------------------------------------------------------
7    YES      Rvs-1              D-OUT-1      ON        MAIL
     - Mail -------------------------------------------------------------------
     alarms@mydomain.com
     #
     SYS
-------------------------------------------------------------------------------
[Note]Note

Initialize alarm rules and save the configuration with init alarm and save conf.

Corresponding command for RIO:

[14:56:56] ABILIS_CPX:a alarm id:7 enabled:yes res:rio-1 action:mail io:d-out-1 trigger:on mail-rcpt:alarms@mydomain.com

COMMAND EXECUTED 

[14:57:05] ABILIS_CPX:d alarm id:7                                                                                      

- Not Saved (SAVE CONF), Not Refreshed (INIT) ---------------------------------
-------------------------------------------------------------------------------
ID: |[DESCR:]
    |ENABLED:|RES:              |IO:         |TRIGGER: |ACTION:
    |MAIL-RCPT:
    |MAIL-RCPT-LIST:
    |MAIL-BODY:
    |SMS-CDO:
    |DISA-USER:                 |DISA-SERVICE:
    |DISA-CDO:                  |DISA-CGO:
-------------------------------------------------------------------------------
7    YES      Rio-1              D-OUT-1      ON        MAIL
     - Mail -------------------------------------------------------------------
     alarms@mydomain.com
     #
     SYS
[Note]Note

Initialize alarm rules and save the configuration with init alarm and save conf.

To see the help online use the following command:

[19:06:49] ABILIS_CPX:a alarm id:7 ? trigger: io: 

Alarm management rule parameter(s):

TRIGGER:   Alarm/event to be monitored [NONE, TRAP, ALARM-ON, ALARM-OFF,
           ALARM-*, ON, OFF, LOW, NORMAL, HIGH, *]
           TRAP : allowed only for ACTION not equal to DISA-CB.
           TRAP, ALARM-ON, ALARM-OFF : allowed only for IO equal to #.
           ON, OFF, * : allowed only for Digital lines.
           LOW, NORMAL, HIGH, * : allowed only for Analog lines.
IO:        Input/output line for which the alarm/event is monitored. # or 
           - for Gpio: D-IN-n or D-OUT-n, where 'n' can be [1..16, *] or
                       A-IN-n, where 'n' can be [1..8, *];
           - for Mfio: D-IN-n or D-OUT-n, where 'n' can be [1..7, *];
           - for Rio : D-IN-n or D-OUT-n, where 'n' can be [1..16, *] or
                       A-IN-n or A-OUT-n, where 'n' can be [1..8, *];
           - for Rvs : D-IN-n or D-OUT-n, where 'n' can be [1..4, *].
                                         <Only for Gpio/MfIo/Rio/Rvs resources>
[Tip]Tip

Other information about Alarm resource are available in the Section 35.1, “ALARM resource”.

[Tip]Tip

Interesting chapters:

Section 75.24, “Sending Alarm through a call”;

Section 75.25, “Sending Alarm through SMS”.

Prev Up Next
16.4. IOBOX diagnostics and statistics Home Chapter 17. RJS - RJ Switch