| 49.12. Supplementary services | ||
|---|---|---|
 | Chapter 49. CTI System |  |
| 49.12. Supplementary services | ||
|---|---|---|
| | Chapter 49. CTI System | |
Supplementary service isn't active by default for BRI ports while it's active by default for POTS ports. They can be enabled by choosing the kind of interface (CTIP, CLUSTER, SIP or IAX).
When these services are activated:
The call forwarding and the do-not-disturb (SS-CF-DND) features are active by default;
The pickup is active only for calls of the belonging group (SS-PICKUP:GROUP).
The Voice Mail feature is active by default;
Use the following command to activate supplementary services for the CTIP interface:
[11:59:03] ABILIS_CPX:s ctip:32 ss:yesCOMMAND EXECUTED [12:00:08] ABILIS_CPX:d ctipe:32CTIP:32 - Not Saved (SAVE CONF), Not Refreshed (INIT) ------------------------ Act DESCR:to_PBX Run card:BSE-1<2> USER:# OPSTATE:UP LOG:DS side:TE LINE:PP TYPE:USER signalling:DSS1 TEI:STANDARD HOLD:NO SS:YES mode:Bri L12-ACT:UP BUS:SHORT NUM:* ADDRBOOK-NUM:NUM BCHANS:ALL-BID X25:NO (XTEI:10) XK:7 XN200:3 xn201:260 XN202:3 XT200:1 XT202:2 XT203:10 Q931:YES (QTEI:0) QK:1 QN200:3 qn201:260 QN202:3 QT200:1 QT202:2 QT203:10 TDISC:90 QT301:180 QT302:15 QT303:4 QT304:30 QT305:30 QT308:4 QT310:30 QT313:6 QT316:15 DIALT:5 scrst:YES ORCD:0 ICT-T1:500 ICT-T2:500 SQNRTY1:15 SQDELAY1:30 SQDELAY2:5 LCS-GROUP:NONE BUSY-NOCHAN:NO OUTDIAL-TONE:SYS SS-PICKUP:GROUPS SS-PRES-CG:YES NPOO-CT:SYS SS-CF-DND:YES SS-VM:YES CLIP-RULE:PRIVATE
Type the command s user:test sip:yes sip-ss:yes to activate supplementary services for a SIP user, or s user:test iax:yes iax-ss:yes for a IAX user.
The following command helps to verify the new parameters.
[16:05:48] ABILIS_CPX:d user:test
- Not Saved (SAVE CONF) -------------------------------------------------------
Parameter: | Value:
------------------+------------------------------------------------------------
USER: alice
ALIAS: alice
ID: 5 <Read Only>
...
IAX-SS: YES
IAX-SS-PICKUP: NO
IAX-SS-PRES-CG: YES
IAX-SS-CF-DND: YES
...
SIP-SS: YES
SIP-SS-PICKUP: NO
SIP-SS-PRES-CG: YES
SIP-SS-CF-DND: YES
...
-------------------------------------------------------------------------------Type the command s cticl clus:clus1 ss:yes to activate supplementary services for a cluster.
[16:06:32] ABILIS_CPX:d cticl
- Not Saved (SAVE CONF) -------------------------------------------------------
Configured Clusters:1
--------------+----------------------+------------------------+------------+---
CLUS: [Int]|[DESCR:]
|NUM: |CG-IN-REWRITE: |CLIP-RULE: |SS:
|NUMx:
--------------+----------------------+------------------------+------------+---
clus1 [ 1] * - PRIVATE YESConfiguring pickup for POTS/BRI ports.
Pickup can be configured managing the SS-PICKUP parameter.
SS-PICKUPPickup permission [NO: pickup
disabled, GROUP: pickup enabled only for
call of the belonging group, ANY: pickup
enabled].
![[Warning]](../images/warning.png) | Warning |
|---|---|
Setting |
[12:42:02] ABILIS_CPX:s ctipe:101 ss-pickup:anyCOMMAND EXECUTED [12:42:19] ABILIS_CPX:d ctipe:101CTIP:101 - Not Saved (SAVE CONF), Not Refreshed (INIT) ------------------------ Act DESCR:phone_1 Run card:POTS-1<1> OPSTATE:UP LOG:NO TYPE:USER signalling:POTS HOLD:YES CT:ICT SS:YES mode:Pots NUM:18 LOOP:NO TEST:NO CLIP:SYS CLIP-STD:SYS CLIP-TAS:SYS MIN-FLASH:SYS SENSING:SYS ABF:SYS HPF:SYS DEBOUNCE:SYS MAX-FLASH:SYS COUNTRY:SYS IN-GAIN-ADJ:SYS OUT-GAIN-ADJ:SYS AT:SYS AT-CODE:SYS AT-DURATION:SYS BC:SYS DT:SYS DT-CODE:SYS DT-DURATION:SYS OUT-DIAL-TONE:SYS SS-PICKUP:ANY SS-PRES-CG:YES NP-CT:SYS SS-CF-DND:YES
Remember to save the configurations (save conf) and initialize the CTISYS resource (init ctisys).
Configuring pickup for SIP/IAX users.
SIP users are enabled only to pickup every call setting
SIP-SS-PICKUP to ANY (SIP-SS-PICKUP:GROUP
isn't permitted). Remember to enable supplementary services.
[12:34:49] ABILIS_CPX:s user:test sip-ss-pickup:anyCOMMAND EXECUTED [12:34:57] ABILIS_CPX:d user:test- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: ------------------+------------------------------------------------------------ USER: test ALIAS: test ... SIP-SS: YES SIP-SS-PICKUP: ANY ... -------------------------------------------------------------------------------
IAX users are enabled only to pickup every call setting
IAX-SS-PICKUP to ANY (IAX-SS-PICKUP:GROUP
isn't permitted). Remember to enable supplementary services.
[12:37:21] ABILIS_CPX:s user:iax_user iax-ss-pickup:anyCOMMAND EXECUTED [12:39:30] ABILIS_CPX:d user:iax_user- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: ------------------+------------------------------------------------------------ USER: iax_user ALIAS: iax_user ... IAX-SS: NO IAX-SS-PICKUP: ANY ... -------------------------------------------------------------------------------
Now configure CTI preferences or CTI advanced preferences for the user. This last configuration can be done using the web interface.
Activating DND for POTS/BRI ports.
CF and DND are enabled by default and managed through the SS-CF-DND parameter.
SS-CF-DNDCall forwarding and Do-Not-Disturb [NO, YES]. The default value is YES.
The command below disables CF and DND.
[12:49:04] ABILIS_CPX:s ctip:101 ss-cf-dnd:noCOMMAND EXECUTED [12:50:15] ABILIS_CPX:d ctipe:101CTIP:101 - Not Saved (SAVE CONF), Not Refreshed (INIT) ------------------------ Act DESCR:phone_1 Run card:BSE-1<9> USER:11 OPSTATE:UP LOG:NO TYPE:USER signalling:POTS HOLD:YES CT:ICT SS:YES DEVICE:PHONE AC:NO NUM:11 ADDRBOOK-NUM:NUM AC-CDO:# AC-DLY:60 LOOP:NO TEST:NO CLIP:SYS CLIP-STD:SYS CLIP-TAS:SYS CLIP-LEVEL:SYS SENSING:SYS ABF:SYS HPF:SYS DEBOUNCE:SYS MIN-FLASH:SYS COUNTRY:SYS MAX-FLASH:SYS DIALT:5 IN-GAIN-ADJ:SYS OUT-GAIN-ADJ:SYS AT:SYS AT-CODE:SYS AT-DURATION:SYS BC:SYS DT:SYS DT-CODE:SYS DT-DURATION:SYS OUTDIAL-TONE:SYS SS-PICKUP:GROUPS SS-PRES-CG:YES NPOO-CT:SYS SS-CF-DND:NO SS-VM:YES
The above example deactivate the CF and DND for CTI port #101.
Remember to save the configurations (save conf) and initialize the CTISYS resource (init ctisys).
Activating call forward and DND for SIP/IAX users.
Call forwarding and DND for SIP users can be configured using the following parameter:
SIP-SS-CF-DNDCall forwarding and Do-Not-Disturb [NO, YES]. The default value is YES.
The command below disables CF and DND.
[14:43:29] ABILIS_CPX:s user:test sip-ss-cf-dnd:noCOMMAND EXECUTED [14:44:32] ABILIS_CPX:d user:test- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: ------------------+------------------------------------------------------------ USER: test ALIAS: test ... SIP-SS: YES SIP-SS-PICKUP: ANY SIP-SS-PRES-CG: YES SIP-SS-CF-DND: NO SIP-SS-VM: YES
Remember to save the configuration.
Call forwarding and DND for IAX users can be configured using the following parameter:
IAX-SS-CF-DNDCall forwarding and Do-Not-Disturb [NO, YES]. The default value is YES.
The command below disables CF and DND.
[14:47:44] ABILIS_CPX:s user:iax_user iax-ss-cf-dnd:noCOMMAND EXECUTED [14:48:10] ABILIS_CPX:d user:iax_user- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: ------------------+------------------------------------------------------------ USER: iax_user ALIAS: iax_user ... IAX-SS: NO IAX-SS-PICKUP: ANY IAX-SS-PRES-CG: YES IAX-SS-CF-DND: NO IAX-SS-VM: YES
Remember to save the configuration.
This feature can be configured using CTI preferences or CTI advanced preferences via web interface or via CP.
Configuring DND for a CTI port.
Configuring DND using CP and CTI preferences.
Set the value of CTIP-ACTION parameter to DND in CTI preferences. Use the below command:
[14:21:51] ABILIS_CPX:s pref user:test ctip-action:dndCOMMAND EXECUTED [14:33:27] ABILIS_CPX:d pref user:test- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: --------------------+---------------------------------------------------------- USER: test ID: 4 <Read Only> LAST-CHANGE: 24/04/2015 14:33:27 CET <Read Only> PWD: *** -------------------- CTIP-CLIP: TRANSP CTIP-ACTION: DND CTIP-CF-RULE: ALWAYS CTIP-CF-TOUT: 15 CTIP-CF-DLY: 10 CTIP-CF-FORK-TYPE: STD CTIP-CF-CDO: # CTIP-CF-CGO: * CTIP-VM: NO CTIP-VM-RULE: NOANS,OTHERS CTIP-VM-TOUT: 15 ...
Remember to save the configuration.
Configuring DND using CP and CTI advanced preferences.
Verify that CTIP-ACTION is set to ADVANCED to use CTI advanced preferences.
Add a rule to CTI advanced preferences for the specified user:
[14:59:38] ABILIS_CPX:a cf user:test pr:1 enabled:yes in-use:yes action:dndCOMMAND EXECUTED [15:02:13] ABILIS_CPX:d cf user:test- Not Saved (SAVE CONF) ------------------------------------------------------- USER:test (Last change: 24/09/2015 14:02:41 CET) ------------------------------------------------------------------------------ PR |ENABLED|IN-USE|IF |ACTION ADMIN|CGI |CDI |RULE |CGO |CDO |TOUT |DLY |FORK-TYPE |TI1 .. TI5 ------------------------------------------------------------------------------ 1 YES YES ANY DND NO * * ALWAYS ------------------------------------------------------------------------------
Remember to save the configuration.
Rules are ordered using the PR parameter which can be used as reference to modify the values:
s cf user:<username> parameter:<value>
Remember to save the configuration.
Configuring DND for SIP/IAX users.
Configuring DND using CP and CTI preferences.
The configuration for SIP users.
Configure the following parameter:
SIP-ACTIONAction [CF: call forward
enabled, DND: DND enabled,
ADVANCED: enables CTI advanced
preferences]. The default is ADVANCED.
[15:11:17] ABILIS_CPX:s pref user:test sip-action:dndCOMMAND EXECUTED [15:20:30] ABILIS_CPX:d pref user:test- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: --------------------+---------------------------------------------------------- USER: test ID: 4 <Read Only> LAST-CHANGE: 24/04/2015 15:20:30 CET <Read Only> PWD: *** ... -------------------- SIP-CLIP: TRANSP SIP-ACTION: DND SIP-CF-RULE: ALWAYS SIP-CF-TOUT: 15 SIP-CF-DLY: 10 SIP-CF-FORK-TYPE: STD SIP-CF-CDO: # SIP-CF-CGO: * SIP-VM: NO SIP-VM-RULE: NOANS,OTHERS SIP-VM-TOUT: 15 ...
Remember to save the configuration.
The configuration for IAX users.
Configure the following parameter:
IAX-ACTIONAction [CF: call forward
enabled, DND: DND enabled,
ADVANCED: enables CTI advanced
preferences]. The default is ADVANCED.
[15:20:35] ABILIS_CPX:s pref user:test iax-action:dndCOMMAND EXECUTED [15:21:39] ABILIS_CPX:d pref user:test- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: --------------------+---------------------------------------------------------- USER: test ID: 4 <Read Only> LAST-CHANGE: 24/04/2015 15:21:39 CET <Read Only> PWD: *** ... -------------------- IAX-CLIP: TRANSP IAX-ACTION: DND IAX-CF-RULE: ALWAYS IAX-CF-TOUT: 15 IAX-CF-DLY: 10 IAX-CF-FORK-TYPE: STD IAX-CF-CDO: # IAX-CF-CGO: * IAX-VM: NO IAX-VM-RULE: NOANS,OTHERS IAX-VM-TOUT: 15 ...
Remember to save the configuration.
Configuring DND using CP and CTI advanced preferences.
The configuration for SIP users.
Verify that SIP-ACTION is set to ADVANCED to use CTI advanced preferences.
[15:24:23] ABILIS_CPX:d pref user:test
Parameter: | Value:
--------------------+----------------------------------------------------------
USER: test
ID: 4 <Read Only>
LAST-CHANGE: 24/04/2015 15:23:59 CET <Read Only>
PWD: ***
...
--------------------
SIP-CLIP: SYS
SIP-ACTION: ADVANCED
SIP-CF-RULE: ALWAYS
SIP-CF-TOUT: 15
SIP-CF-DLY: 10
SIP-CF-FORK-TYPE: STD
SIP-CF-CDO: #
SIP-CF-CGO: *
SIP-VM: NO
SIP-VM-RULE: NOANS,OTHERS
SIP-VM-TOUT: 15
...Add a rule to CTI advanced preferences for the specified user:
[15:34:48] ABILIS_CPX:a cf user:test pr:1 enabled:yes in-use:yes if:sip action:dndCOMMAND EXECUTED [15:35:32] ABILIS_CPX:d cf user:test- Not Saved (SAVE CONF) ------------------------------------------------------- USER:test (Last change: 24/09/2015 14:07:58 CET) ------------------------------------------------------------------------------ PR |ENABLED|IN-USE|IF |ACTION ADMIN|CGI |CDI |RULE |CGO |CDO |TOUT |DLY |FORK-TYPE |TI1 .. TI5 ------------------------------------------------------------------------------ 1 YES YES SIP DND NO * * ALWAYS ------------------------------------------------------------------------------
The above rule enables DND only for the SIP
interface (IF:SIP).
Rules are ordered using the PR parameter which can be used as reference to modify the values:
s cf user:<username> parameter:<value>
Remember to save the configuration.
The configuration for IAX users.
Verify that IAX-ACTION is set to ADVANCED to use CTI advanced preferences.
[15:24:23] ABILIS_CPX:d pref user:test
Parameter: | Value:
--------------------+----------------------------------------------------------
USER: test
ID: 4 <Read Only>
LAST-CHANGE: 24/04/2015 15:23:59 CET <Read Only>
PWD: ***
...
--------------------
IAX-CLIP: SYS
IAX-ACTION: ADVANCED
IAX-CF-RULE: ALWAYS
IAX-CF-TOUT: 15
IAX-CF-DLY: 10
IAX-CF-FORK-TYPE: STD
IAX-CF-CDO: #
IAX-CF-CGO: *
IAX-VM: NO
IAX-VM-RULE: NOANS,OTHERS
IAX-VM-TOUT: 15
...Add a rule to CTI advanced preferences for the specified user:
[15:38:03] ABILIS_CPX:a cf user:test pr:1 enabled:yes in-use:yes if:iax action:dndCOMMAND EXECUTED [15:38:48] ABILIS_CPX:d cf user:test- Not Saved (SAVE CONF) ------------------------------------------------------- USER:test (Last change: 24/09/2015 14:07:58 CET) ------------------------------------------------------------------------------ PR |ENABLED|IN-USE|IF |ACTION ADMIN|CGI |CDI |RULE |CGO |CDO |TOUT |DLY |FORK-TYPE |TI1 .. TI5 ------------------------------------------------------------------------------ 1 YES YES IAX DND NO * * ALWAYS ------------------------------------------------------------------------------
The above rule enables DND only for the IAX
interface (IF:IAX).
Rules are ordered using the PR parameter which can be used as reference to modify the values:
s cf user:<username> parameter:<value>
Remember to save the configuration.
Configuring CF for CTIP ports.
Configuring CF using CP and CTI preferences.
Configure the following parameters for the user who is associated to this CTIP port.
CTIP-ACTIONCTIP interface: action [CF:
call forward enabled, DND: DND
enabled, ADVANCED: use CTI advanced
preferences].
CTIP-CF-RULERule for call forwarding
[ALWAYS, BUSY,
NOANS, OTHERS,
FORK]. Values [BUSY, NOANS, OTHERS,
FORK] can be joined using ',' character.
CTIP-CF-TOUTTime-out for the 'NOANS' rule [5..180 sec].
CTIP-CF-CDOOutput called number for call forwarding. From 1 up to 20 digits in the range ['0'..'9'] or "#" optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] attributes.
CTIP-CF-CGOOutput calling number for call forwarding
[*, USER].
Example:
[16:36:42] ABILIS_CPX:s pref user:test ctip-action:cf ctip-cf-rule:always ctip-cf-cdo:12COMMAND EXECUTED [16:38:54] ABILIS_CPX:d pref user:test- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: --------------------+---------------------------------------------------------- USER: test ID: 4 <Read Only> LAST-CHANGE: 24/04/2015 16:38:54 CET <Read Only> PWD: *** -------------------- CTIP-CLIP: TRANSP CTIP-ACTION: CF CTIP-CF-RULE: ALWAYS CTIP-CF-TOUT: 15 CTIP-CF-DLY: 10 CTIP-CF-FORK-TYPE: STD CTIP-CF-CDO: 12 CTIP-CF-CGO: * CTIP-VM: NO CTIP-VM-RULE: NOANS,OTHERS CTIP-VM-TOUT: 15 ...
Configuring CF using CP and CTI advanced preferences.
Verify that CTIP-ACTION is set to ADVANCED to use CTI advanced preferences.
Add a rule to CTI advanced preferences for the specified user:
[16:43:41] ABILIS_CPX:a cf user:test pr:1 enabled:yes in-use:yes if:ctip action:cf rule:always cdo:12COMMAND EXECUTED [16:46:07] ABILIS_CPX:d cf user:test- Not Saved (SAVE CONF) ------------------------------------------------------- USER:test (Last change: 24/09/2015 14:12:56 CET) ------------------------------------------------------------------------------ PR |ENABLED|IN-USE|IF |ACTION ADMIN|CGI |CDI |RULE |CGO |CDO |TOUT |DLY |FORK-TYPE |TI1 .. TI5 ------------------------------------------------------------------------------ 1 YES YES CTIP CF NO * * ALWAYS * 12 15 10 STD ------------------------------------------------------------------------------
Remember to save the configuration.
The most important parameter are:
ADMINEntry reserved to the Administrator [NO, YES].
ENABLEDEnable/disable this entry [NO, YES].
IN-USEActivate/deactivate the rule [NO, YES].
IFInterface type [ANY, CTIP, CLUS, SIP, IAX].
ACTIONAction [NONE, CF, DND,VM].
RULERule for call forwarding [ALWAYS, BUSY, NOANS, OTHERS, FORK]. Values [BUSY, NOANS, OTHERS, FORK] can be joined using ',' character.
CDOOutgoing Called Number. Max 20 characters in the range [0..9, *, #, 'macro'] optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] attributes.
Configuring CF for SIP/IAX users.
Configuring CF using CP and CTI preferences.
The configuration for SIP users.
Configure at least the following parameters:
SIP-ACTIONAction [CF: call forward
enabled, DND: DND enabled,
ADVANCED: enables CTI advanced
preferences]. The default is ADVANCED.
SIP-CF-CDOOutput called number for call forwarding. From 1 up to 20 digits in the range ['0'..'9'] or "#" optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] attributes.
[17:25:25] ABILIS_CPX:s pref user:test sip-action:cf sip-cf-cdo:12COMMAND EXECUTED [17:31:15] ABILIS_CPX:d pref user:test- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: --------------------+---------------------------------------------------------- USER: test ID: 4 <Read Only> LAST-CHANGE: 24/04/2015 17:31:15 CET <Read Only> PWD: *** ... -------------------- SIP-CLIP: TRANSP SIP-ACTION: CF SIP-CF-RULE: ALWAYS SIP-CF-TOUT: 15 SIP-CF-DLY: 10 SIP-CF-FORK-TYPE: STD SIP-CF-CDO: 12 SIP-CF-CGO: * SIP-VM: NO SIP-VM-RULE: NOANS,OTHERS SIP-VM-TOUT: 15 ...
Remember to save the configuration.
Advanced configurations can be done using remaining parameters.
The configuration for IAX users.
Configure at least the following parameters:
IAX-ACTIONAction [CF: call forward
enabled, DND: DND enabled,
ADVANCED: enables CTI advanced
preferences]. The default is ADVANCED.
IAX-CF-CDOOutput called number for call forwarding. From 1 up to 20 digits in the range ['0'..'9'] or "#" optionally preceded by TON [u, i, n, o, s, h, c] and/or NP [x, e, d, t, l, p] attributes.
[17:32:17] ABILIS_CPX:s pref user:test iax-action:cf iax-cf-cdo:12COMMAND EXECUTED [17:36:22] ABILIS_CPX:d pref user:test- Not Saved (SAVE CONF) ------------------------------------------------------- Parameter: | Value: --------------------+---------------------------------------------------------- USER: test ID: 4 <Read Only> LAST-CHANGE: 24/04/2015 17:36:22 CET <Read Only> PWD: *** ... -------------------- IAX-CLIP: TRANSP IAX-ACTION: CF IAX-CF-RULE: ALWAYS IAX-CF-TOUT: 15 IAX-CF-DLY: 10 IAX-CF-FORK-TYPE: STD IAX-CF-CDO: 12 IAX-CF-CGO: * IAX-VM: NO IAX-VM-RULE: NOANS,OTHERS IAX-VM-TOUT: 15 ...
Remember to save the configuration.
Advanced configurations can be done using remaining parameters.
Configuring CF using CP and CTI advanced preferences.
The configuration for SIP users.
Verify that SIP-ACTION is set to ADVANCED to use CTI advanced preferences.
[15:24:23] ABILIS_CPX:d pref user:test
Parameter: | Value:
--------------------+----------------------------------------------------------
USER: test
ID: 4 <Read Only>
LAST-CHANGE: 24/04/2015 15:23:59 CET <Read Only>
PWD: ***
...
--------------------
SIP-CLIP: SYS
SIP-ACTION: ADVANCED
SIP-CF-RULE: ALWAYS
SIP-CF-TOUT: 15
SIP-CF-DLY: 10
SIP-CF-FORK-TYPE: STD
SIP-CF-CDO: 12
SIP-CF-CGO: *
SIP-VM: NO
SIP-VM-RULE: NOANS,OTHERS
SIP-VM-TOUT: 15
...Add a rule to CTI advanced preferences for the specified user:
[17:43:37] ABILIS_CPX:a cf user:test pr:1 enabled:yes in-use:yes if:sip cdo:12 action:cf rule:alwaysCOMMAND EXECUTED [17:44:23] ABILIS_CPX:d cf user:test- Not Saved (SAVE CONF) ------------------------------------------------------- USER:test (Last change: 24/09/2015 14:18:23 CET) ------------------------------------------------------------------------------ PR |ENABLED|IN-USE|IF |ACTION ADMIN|CGI |CDI |RULE |CGO |CDO |TOUT |DLY |FORK-TYPE |TI1 .. TI5 ------------------------------------------------------------------------------ 1 YES YES SIP CF NO * * ALWAYS * 12 15 10 STD ------------------------------------------------------------------------------
Rules are ordered using the PR parameter which can be used as reference to modify the values:
s cf user:<username> parameter:<value>
Remember to save the configuration.
The configuration for IAX users.
Verify that IAX-ACTION is set to ADVANCED to use CTI advanced preferences.
[15:24:23] ABILIS_CPX:d pref user:test
Parameter: | Value:
--------------------+----------------------------------------------------------
USER: test
ID: 4 <Read Only>
LAST-CHANGE: 24/04/2015 15:23:59 CET <Read Only>
PWD: ***
...
--------------------
IAX-CLIP: SYS
IAX-ACTION: ADVANCED
IAX-CF-RULE: ALWAYS
IAX-CF-TOUT: 15
IAX-CF-DLY: 10
IAX-CF-FORK-TYPE: STD
IAX-CF-CDO: 12
IAX-CF-CGO: *
IAX-VM: NO
IAX-VM-RULE: NOANS,OTHERS
IAX-VM-TOUT: 15
...Add a rule to CTI advanced preferences for the specified user:
[17:46:59] ABILIS_CPX:a cf user:test pr:1 enabled:yes in-use:yes if:iax cdo:12 action:cf rule:alwaysCOMMAND EXECUTED [17:47:07] ABILIS_CPX:d cf user:test- Not Saved (SAVE CONF) ------------------------------------------------------- USER:test (Last change: 24/09/2015 14:18:23 CET) ------------------------------------------------------------------------------ PR |ENABLED|IN-USE|IF |ACTION ADMIN|CGI |CDI |RULE |CGO |CDO |TOUT |DLY |FORK-TYPE |TI1 .. TI5 ------------------------------------------------------------------------------ 1 YES YES IAX CF NO * * ALWAYS * 12 15 10 STD ------------------------------------------------------------------------------
Rules are ordered using the PR parameter which can be used as reference to modify the values:
s cf user:<username> parameter:<value>
Remember to save the configuration.
The configuration of Voice Mail is described in Section 54.2.4, “CTIVM configuration through CP”.
| |  | |
| 49.11. Examples of CTI configuration |  | 49.13. FAX Relay with Abilis |